This is a steel compression spring, similar to the one used in the 2017 game FIRST STEAMWORKS?. This spring is slightly stiffer than the McMaster-Carr 9664K68 spring. Notice below that the spring deflection for the AndyMark spring is 1/2" less than the McMaster spring when they both hold on 10 tooth gear. Specifications:
1/2 inch external retaining ring, used in the RAW Box. Specifications:
This retainer clip is used to hold objects (such as gears) in place on shafts. Example: This product can be used to hold a gear onto a PG71 motor shaft. Specification:
Specifications:
This retainer clip is used to hold objects (such as gears) in place on shafts. Example: This product can be used to hold a gear onto a CIM motor shaft. Specification:
This retaining ring can be used on 6 mm D shafts to hold components in place. This is most useful on the shaft of NeveRest gearmotors & gearboxes. Product Overview:
This external retaining ring is used to fit into a groove on a 3/4" shaft. External Rings fit into the groove of a shaft. The portion of the ring that protrudes from the groove holds the assembly in place. Example: Within AndyMark products, this fastener is used to hold the FlexHub into gears and sprockets with 3/4" hex bore. Specification:
3/16" x 3/4" spring pin. Used in the WormBox gearbox. Specifications:
The Sushi Roller Intake Wheels are an excellent choice for robot intakes, internal conveyors, feeder mechanisms, or anywhere you need a durable, compact and grippy roller. These rollers are made with a robust polycarbonate hex bore hub, so no external hub is necessary - just slide them onto a hex shaft, constrain them axially and you are good to go. Available in a range of durometers for a wide variety of applications, these cute little rollers are great for getting a grip on things!
E-Clip ring for 1/2" shaft Specifications: