Canaux et supports
This sheet metal plate bridges the inner and outer plates of the TileRunner and provides for additional mounting points.
Specifications:
The Bumper Wood Corner Bracket is designed to connect two plywood planks together to form a strong 90 degree bumper corner.
Layout Print(s)
am-3233 AM14U3 Bumper Outside Corner Bracket.PDF
CAD File(s)
This is a kit of all the bumper hardware and bracketry needed to mount bumpers to an AM14U4 chassis in accordance with the 2020 & 2021 FRC bumper rules. If using this kit you will need to supply the wood, pool noodles, and fabric to make a complete set of bumpers.
Guide(s)
2020 AM14U4 Bumper Attachment_small.pdf
Don't see what you need?
This bracket is used to assist mounting bumpers to the sides of an AM14U4 chassis in accordance with the 2019 FRC bumper rules. This bracket slots into the outside rail (am-3921) to make bumpers flush with the frame.
Specifications
This is a steel sheet metal bracket designed to mount the phd, Inc. OCG cylinders (am-3303, am-3304, am-3305).
Specifications:
Included Hardware:
This is a 15 Degree Bracket used in the Ramp.
Specifications:
The Left Triangle Bracket was originally designed for the AM14U2, AM14U3 and AM14U4 chassis as a robust backing for mounting bumpers. It's also perfect for making robust 90 degree connections between two robot frame sections.
Layout Print(s)
am-3210L Left Triangle Bracket REV2.PDF
CAD File(s)
The Left Triangle Bracket was originally designed for the AM14U2, AM14U3 and AM14U4 chassis as a robust backing for mounting bumpers. It's also perfect for making robust 90 degree connections between two robot frame sections.
Layout Print(s)
am-3210R Right Triangle Bracket REV2.PDF
CAD File(s)
This bracket is designed to attach bumpers to the AM14U3 in the 2018 FIRST Robotics Competition season.
Specifications:
This bracket is designed to attach bumpers to the AM14U3 in the 2018 FIRST Robotics Competition season.
Specifications:
This bracket is used to provide a wider spacing on the AM14U2 and AM14U3 chassis. Use this bracket to space out inner and outer plates to accommodate wider wheel profiles on your AM14U chassis.
Specifications:
C-Channel aluminum piece, for use in a C-Base Drive Chassis. 6 of these items come standard in the C-Base, but only 1 is shipped per item purchased.
Specifications:
This bracket allows attachment of an air cylinder to extrusion that has a 1 in. wide dimension such as Peanut or 2x1 box tube
This bracket provides rigidity to the AM14U2 and AM14U3 and allows for more mounting locations.
Specifications:
This is an air pressure regulator manufactured by Norgren. Also included in this part is the steel mounting bracket and a plastic mounting nut.
Specifications:
This bracket is used for mounting a PG71 motor and gearbox, PG27 motor and gearbox, and a PG188 Motor and Gearbox. Easily mount any of these to C-Channel.
Specifications: