This kit contains the brackets and screws needed to create a frame opening between the inner plates of the AM14U family chassis. Parts included:
This 14T 20DP steel gear can be used as an input gear in our Toughbox Mini, Toughbox Micro and Toughbox Classic gearboxes. Use this gear anywhere you could use our 14T 20DP 8 mm Key Bore Gear.
The MINI® Fuse is the standard for vehicle circuit protection. Its miniature design meets the need for more circuits to be protected while utilizing less space, and its ability to cope with high temperatures in adverse environments makes the MINI® Fuse of recommended choice for protection.
This mini fuse can be used in our Power Pole Distribution Board (am-3699), as well as a replacement in the Power Distribution Panel (am-2856)
This 20 Amp fuse is used in FIRST Tech Challenge batteries and the FIRST Robotics Competition Power Distribution Panel (am-2856). Specifications:
This strap is used to secure the battery in place when using the AM14U Family Vertical Battery Mount Kit (am-3964a).
https://youtu.be/jwxdPDkxTX0
This heatsink is designed to fit the CIM motor FRC teams love so much. This cooler helps disperse heat away from the motor, preserving the life of the motor. Combine more than 1 CIM Cooler (tm) at different cut angles to produce various coverage angles from 10-360 degrees. When using thermal compound between the CIM Cooler (tm) and the motor, test results show from 5-30 degrees F lower operating temperatures. Quantity 1 of this part provides 180 degrees of motor coverage. Next Gen Roboticsmakes this product, manufactured and designed within the USA.
Specifications
Clear polycarbonate perforated sheet.
Useful in many applications, with the original design intent is to act as a floor for the chassis of a robot.
Perfect for helping mount nearly anything quickly with cable ties, or use for cable management.
Holes are made to be a standard 1/2 in. apart, and this sheet can be cut down to any size needed.
Layout Print(s)
am-4262 am-14U4 Family Perforated Polycarbonate.PDF
The CIM motor is a tried and true FIRST Robotics Competition workhorse motor. This brushed DC motor is 2.5 inches in diameter and kicks out 337 watts of power.
Pinion Options:
The CIM motor shaft is 0.313 in. (8 mm) in diameter and 1.25 inches long. It features a 2 mm wide machine key slot allowing installation of any number of custom or off the shelf pinions such as those included with all of our CIM based gearboxes. Other options include a pre-attached 16 tooth pinion making the CIM ready to mate to a CIM Sport planetary gearbox or a pre-attached 15 tooth pinion preparing the CIM for an EVO Gearbox. Use either of these two options if you are planning on using either the CIM Sport or an EVO gearbox and don't want to install the press fit pinion yourself. All of our other CIM based gearboxes use a slip fit pinion & machine key and are easy for the end user to install.
Compatible Components:
Motor Etching
The MK ES17-12, 12 Volt, 18 amp-hour sealed lead acid battery with nut and bolt connector has proven to be a trustworthy power source for many FIRST Robotics Competition robots.
The batteries will be packed within a 7"x7"x7" box (aka: interior box). A 3/4" layer of closed-cell foam will be packed around the interior box, within a 9"x9"x9" box. The entire weight of this double box packing assembly will be approximately 29 pounds.
Two (2) batteries are shipped within one box for this price.
A familiar button layout brings console-style control to your robot controls. No matter what the FIRST FRC game, you’ll have control for every race, battle or tournament. Button customization, multiple controller configurations, printable gaming profiles—it’s your game, your way. All the controls are just where you expect them to be thanks to the standard button layout of this gamepad. Specifications:
XINPUT MODE:
DIRECTINPUT MODE: