Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    AndyMark 170 Tooth 9 mm Wide 5 mm Pitch HTD Timing Belt

    These are all of our 9 mm wide 5 mm pitch HTD synchronous timing belt offerings. All of these belts are a composite of flexible rubber with a fiberglass tensile member throughout. Synchronous timing belts, also known as a toothed belt or synchronous belt, are designed to eliminate slippage and keep any number of objects rotating at a constant rate. We offer genuine Gates brand belts, AndyMark branded belts, as well as lower-cost generic brand belts.

     

    Current Belt Offerings

     

    Parts are organized by the following scheme: (Tooth Count - Trade Number - AndyMark part number)

     

    AndyMark Brand Belts

    • 30T - 150-HTD-5M-9 - am-5209_30T
    • 35T - 175-HTD-5M-9 - am-5209_35T
    • 40T - 200-HTD-5M-9 - am-5209_40T
    • 45T - 225-HTD-5M-9 - am-5209_45T
    • 50T - 250-HTD-5M-9 - am-5209_50T
    • 55T - 275-HTD-5M-9 - am-5209_55T
    • 60T - 300-HTD-5M-9 - am-5209_60T
    • 64T - 320-HTD-5M-9 - am-5209_64T
    • 65T - 325-HTD-5M-9 - am-5209_65T
    • 70T - 350-HTD-5M-9 - am-5209_70T
    • 75T - 375-HTD-5M-9 - am-5209_75T
    • 80T - 400-HTD-5M-9 - am-5209_80T
    • 85T - 425-HTD-5M-9 - am-5209_85T
    • 90T - 450-HTD-5M-9 - am-5209_90T
    • 91T - 455-HTD-5M-9 - am-5209_91T
    • 93T - 465-HTD-5M-9 - am-5209_93T
    • 95T - 475-HTD-5M-9 - am-5209_95T
    • 100T - 500-HTD-5M-9 - am-5209_100T
    • 105T - 525-HTD-5M-9 - am-5209_105T
    • 106T - 530-HTD-5M-9 - am-5209_106T
    • 110T - 550-HTD-5M-9 - am-5209_110T
    • 115T - 575-HTD-5M-9 - am-5209_115T
    • 120T - 600-HTD-5M-9 - am-5209_120T
    • 121T - 605-HTD-5M-9 - am-5209_121T
    • 125T - 625-HTD-5M-9 - am-5209_125T
    • 130T - 650-HTD-5M-9 - am-5209_130T
    • 135T - 675-HTD-5M-9 - am-5209_135T
    • 136T - 680-HTD-5M-9 - am-5209_136T
    • 140T - 700-HTD-5M-9 - am-5209_140T
    • 145T - 725-HTD-5M-9 - am-5209_145T
    • 150T - 750-HTD-5M-9 - am-5209_150T
    • 152T - 760-HTD-5M-9 - am-5209_152T
    • 160T - 800-HTD-5M-9 - am-5209_160T
    • 167T - 835-HTD-5M-9 - am-5209_167T
    • 170T - 850-HTD-5M-9 - am-5209_170T
    • 180T - 900-HTD-5M-9 - am-5209_180T
    • 190T - 950-HTD-5M-9 - am-5209_190T
    • 200T - 1000-HTD-5M-9 - am-5209_200T
    • 225T - 1125-HTD-5M-9 - am-5209_225T
    • 250T - 1250-HTD-5M-9 - am-5209_250T
    # Pièce: am-5209_170T
    $17,00
    4 en stock
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    *
    *
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    0.192 in. ID 0.375 in. OD 1.5 in. Long Aluminum Spacer

    #am-1599
    $3,50

    This spacer is made of aluminum and is 1.5 in. long. It is used in the Climber in a Box.

     

    Specifications

    • Inside Diameter: 0.192 in.
    • Length: 1.5 in.
    • Material: Aluminum
    • Outside Diameter: 0.375 in.

    0.192 in. ID 0.375 in OD 1.0 in. Long Aluminum Spacer

    #am-3876
    $2,75

    This spacer is used in the AM14U Family Vertical Battery Mount Kit (am-3964a) But is a great spacer for #10 screws wherever you might need it. 

     

    Specifications

     

    • Inside Diameter: 0.192 in.
    • Length: 1 in.
    • Material: Aluminum
    • Outside Diameter: 0.375 in.
    • Wall Thickness: 0.09 in.

    2" Compliant Wheel, 1/2 inch Hex, 35 Durometer Green

    #am-3462_green
    $9,50
    ( 27 En stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

    Don't see what you need?

    Aluminum 15 Tooth HTD Pulley - QTY 2

    #TTB-0058
    $28,97
    ( 7 En stock)

    This 5M HTD aluminum pulley 2 pack will allow teams to create larger single belt reductions with a common 1/2" hex interface.

    4" Compliant Wheel, 1/2" Hex Bore, 35A Durometer, Green

    #am-3480_green
    $14,50
    ( 55 En stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex axle creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors.



    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), blue (50A), and black (60A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

      Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

       

       

      Specifications

       

      • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
      • Diameter: 4 in.
      • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
      • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
      • Material: TPU, ⠀Polycarbonate
      • Maximum RPM: 3000-9000
      • Weight: 0.228 - 0.269 Lbs
      • Width: 1 in.

      Documents

      Layout Print(s)

      am-3562 4IN 375Hex Compliant Wheel REV3.PDF

      am-3563 4IN 8mm Compliant Wheel REV4.PDF

      am-3480 4IN 500Hex Compliant Wheel REV3.PDF

      am-4538 4IN 5mm Hex Compliant Wheel.PDF

      CAD File(s)

      am-3562 4IN 375Hex Bore Compliant Wheel REV2.STEP

      am-3563 4IN 8mm Round Compliant Wheel REV2.STEP

      am-3480 4IN 500Hex Bore Compliant Wheel REV2.STEP

      am-4538 4IN 5mm Hex Compliant Wheel.STEP

      Guide(s)

      4 inch Compliant Wheel Expansion.pdf

      Andymark Hubs 1/2 in. Hex

      #am-4124
      $14,00
      (En stock)

      Each hub now has a "flower" pattern that fits and keys into our 42T 5 mm HTD Pulley, which means you are no longer constrained to our legacy 500EX Hex Hub for compatibility with this pulley. Every hub still maintains a closed-profile hole for maximum strength. Every shaft hub has been designed with bearing bosses on both sides that have been sized appropriately for the mating bearings that would pair with the bore through the hub, which means you can run each hub right against a bearing with no need for extra spacers. All of these hubs are also made from 7075-T6 aluminum, which is much stronger than the previously used 6061-T6, 6005, and 6105 alloys from our older designs. Where possible, the shoulder on shaft hubs was reduced to 7/8" in diameter for an easier fit with our molded plastic wheels, while still maintaining a precise 1.125" diameter boss for locating in wheels, sprockets, gears, and more. 

       

      The holes are evenly spaced on a 1.875 in. circle and 0.201 inches in diameter. That's a perfect size for #10 bolts!

       

      Learn how to attach these hubs to AndyMark wheels by watching this video!

      3 inch Compliant Wheel, 1/2 inch Hex, 35A Durometer, Green

      #am-3945_green
      $12,25
      ( 60 En stock)

      You asked, we listened! These 3" diameter HD (heavy-duty) solid-core Compliant Wheels are intended for manipulating objects where you need a little 'give' in your intake system. These wheels deform out of the way to allow rigid objects to be manipulated easily. This makes for high-performance intakes and internal conveyors. These wheels do not require the use of expensive hubs to be driven, thanks to their integrated high strength polycarbonate hubs - which are made from the same mold that creates our Hex Molded Spacers.



      Different durometer ratings give each wheel unique characteristics. Green compliant wheels (35A durometer) are the softest and most compliant around objects, while maroon (45A) blue (50A) and black (60A) wheels are increasingly firm.

       

      Specifications

       

      • Bore: 0.375 in. Hex, 0.5 in. Hex, 5 mm Hex
      • Color: Green, Black, Blue, Black
      • Core Material: Polycarbonate
      • Diameter: 3 in.
      • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
      • Tread Material: TPU
      • Weight: 0.12 lbs
      • Overall Width: 1 in.

       

      Documents

       

      Layout Print(s)

      am-3946 3IN 375Hex Compliant Wheel REV3.PDF

      am-3945 3IN 500Hex Compliant Wheel REV3.PDF

      am-4537 3in 5mm Hex Molded Compliant Wheel.PDF

      CAD File(s)

      am-3946 3IN 375Hex Compliant Wheel REV 3.STEP

      am-3945 3IN 500Hex Compliant Wheel REV 3.STEP

      am-4537 3in 5mm Hex Molded Compliant Wheel.STEP

      AndyMark 55 Tooth 9 mm Wide 5 mm Pitch HTD Timing Belt

      #am-5209_55T
      $10,00
      ( 5 En stock)

      These are all of our 9 mm wide 5 mm pitch HTD synchronous timing belt offerings. All of these belts are a composite of flexible rubber with a fiberglass tensile member throughout. Synchronous timing belts, also known as a toothed belt or synchronous belt, are designed to eliminate slippage and keep any number of objects rotating at a constant rate. We offer genuine Gates brand belts, AndyMark branded belts, as well as lower-cost generic brand belts.

       

      Current Belt Offerings

       

      Parts are organized by the following scheme: (Tooth Count - Trade Number - AndyMark part number)

       

      AndyMark Brand Belts

      • 30T - 150-HTD-5M-9 - am-5209_30T
      • 35T - 175-HTD-5M-9 - am-5209_35T
      • 40T - 200-HTD-5M-9 - am-5209_40T
      • 45T - 225-HTD-5M-9 - am-5209_45T
      • 50T - 250-HTD-5M-9 - am-5209_50T
      • 55T - 275-HTD-5M-9 - am-5209_55T
      • 60T - 300-HTD-5M-9 - am-5209_60T
      • 64T - 320-HTD-5M-9 - am-5209_64T
      • 65T - 325-HTD-5M-9 - am-5209_65T
      • 70T - 350-HTD-5M-9 - am-5209_70T
      • 75T - 375-HTD-5M-9 - am-5209_75T
      • 80T - 400-HTD-5M-9 - am-5209_80T
      • 85T - 425-HTD-5M-9 - am-5209_85T
      • 90T - 450-HTD-5M-9 - am-5209_90T
      • 91T - 455-HTD-5M-9 - am-5209_91T
      • 93T - 465-HTD-5M-9 - am-5209_93T
      • 95T - 475-HTD-5M-9 - am-5209_95T
      • 100T - 500-HTD-5M-9 - am-5209_100T
      • 105T - 525-HTD-5M-9 - am-5209_105T
      • 106T - 530-HTD-5M-9 - am-5209_106T
      • 110T - 550-HTD-5M-9 - am-5209_110T
      • 115T - 575-HTD-5M-9 - am-5209_115T
      • 120T - 600-HTD-5M-9 - am-5209_120T
      • 121T - 605-HTD-5M-9 - am-5209_121T
      • 125T - 625-HTD-5M-9 - am-5209_125T
      • 130T - 650-HTD-5M-9 - am-5209_130T
      • 135T - 675-HTD-5M-9 - am-5209_135T
      • 136T - 680-HTD-5M-9 - am-5209_136T
      • 140T - 700-HTD-5M-9 - am-5209_140T
      • 145T - 725-HTD-5M-9 - am-5209_145T
      • 150T - 750-HTD-5M-9 - am-5209_150T
      • 152T - 760-HTD-5M-9 - am-5209_152T
      • 160T - 800-HTD-5M-9 - am-5209_160T
      • 167T - 835-HTD-5M-9 - am-5209_167T
      • 170T - 850-HTD-5M-9 - am-5209_170T
      • 180T - 900-HTD-5M-9 - am-5209_180T
      • 190T - 950-HTD-5M-9 - am-5209_190T
      • 200T - 1000-HTD-5M-9 - am-5209_200T
      • 225T - 1125-HTD-5M-9 - am-5209_225T
      • 250T - 1250-HTD-5M-9 - am-5209_250T