AndyMark
AndyMark
#25 Single Strand-Riveted Roller Chain 10 feet
#25 Roller Chain, 10 feet
Product Overview:
- Material: Steel
- Specification: ASME/ANSI B29.1
- Style: Riveted - Single Strand
- Type: Roller Chain
- Size: #25
- Pitch: 1/4"
- Weight: 1.014 lbs
#35 Connecting Link for Roller Chain
#35 Connecting Link (Master Link)
Specifications:
- Material: Steel
- Style: Roller Chain - Spring Clip
- Type: Connecting Link
- Size: #35
- Pitch: 0.375 inch
- Weight: 0.01 lbs
#35 Half Link for Roller Chain
#35 Half Link. Also known as #35 Offset Link.
Specifications:
- Material: Steel
- Style: Roller Chain with interted pin
- Type: Half Link
- Size: #35
- Pitch: 0.375 inch
- Weight: 0.01 lbs
#35 In line Chain Tensioner
This Inline Chain Tensioner for #35 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #35 Master Links and integrate this to your robot for an easy-to-use chain tension solution!
The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.
Specifications
- Chain Size: #35
Documents
CAD File(s)
am-3914_35 35 Chain Tensioner.STEP
Layout Print(s)
#35 Single Strand-Riveted Roller Chain 10 feet
#35 Roller Chain, 10 feet
Specifications:
- Material: Steel
- Specification: ASME/ANSI B29.1
- Style: Riveted - Single Strand
- Type: Roller Chain
- Size: #35
- Pitch: 3/8"
- Weight: 2.5 lbs
#4 Washer - Min 25
#4 Steel Washer
Specifications:
- Material: Steel
- Finish: Zinc
- Outside Diameter: 0.31 inch
- Inside Diameter: 0.13 inch
- Thickness: 0.02 to 0.04 inch
- Weight: 0.0004 lbs
#4-40 x 0.75" 0.625" Shoulder SHCS
This steel shoulder screw is used in the EVO Shifter Four Tooth Dog Gear (am-3568).
Specifications:
- Thread: #4-40
- Length: 0.75"
- Thread Length: 0.125"
- Weight: 0.006 Lbs
- Head: Socket Head Cap Screw
#4-40 x 0.875" 0.5" shoulder SHCS
#4-40 x 7/8" Long with 1/2" shoulder Socket Head Cap Screw used in the Dog Gear
Specifications:
- Quantity: 1
- Thread: #4-40
- Length: 7/8 inches
- Shoulder Length: 1/2 inches
- Weight: 0.001 pounds
- Head: Socket Head Cap Screw
#6-32 x 1.25" Head Head - Min 25
These 6-32 1.25" Hex Head Machine Screw can be used for fastening Nubs to other motion products.
Specifications:
- Material: Steel
- Coating: Zinc plated
- Thread: 6-32
- Length: 1.25"
- Head: Hex
- Weight: 0.0045 lbs
#8-15 x 0.625" Pan Head Phillips - Min 25
These screws are used within the FIRST STEAMWORKS? Gear. The FIRST STEAMWORKS? Gear uses 20 screws for assembly. This screw is available in quantities of 25, giving you a few extras when assembling.
Specifications:
- Diameter: #8
- Diameter - Thread Size: #8 - 15
- Drive: Phillips
- Drive Size: #2
- Finish: Zinc
- Head: Pan
- Length: 5/8"
- Material: Steel
0.118 in. Thick 24 in. x 24 in. Polycarbonate Sheet
This is a single sheet of 1/8 inch thick polycarbonate (PC) plastic, cut to a 24x24 inch square. This single sheet of PC will be shipped with the protective covering on both sides of the plastic sheet.
Polycarbonate was invented in 1963 by Dan Fox at General Electric. GE's trade name for this plastic is LEXAN, but it also is sold under other trade names (Makrolon, Hyzod, Cyrolon).
This material is NOT plexiglas or acrylic, as we don't suggest that you use that material on a mobile robot, since acrylic will easily shatter.
Specifications:
- Weight: 2.9 pounds
- Width: 24 inches
- Length: 24 inches
- Material thickness: 0.118 inch
- Material: Clear Polycarbonate
0.280" long, 0.518" od, 0.382" id, Spacer
Nylon Spacer
Specifications:
- Material: White Nylon Plastic
- Length: 0.280"
- Inside Diameter: 0.382"
- Outside Diameter: 0.518"
- Weight: < 0.001 pounds
0.344" ID, 0.688" OD, 1/8" thick, brass Washer
Specifications:
- Bolt Size: 5/16"
- Finish: Plain
- Inner Diameter: 0.344"
- Material: Brass
- Nominal Thickness: 0.125"
- Outer Diameter: 0.688"
0.375"Aluminum Hex Stock 1 Foot (am-3807-1)
This 7075 T6 Aluminum shaft stock is 0.375 in. from flat to flat. This stock may be a tight fit in some of our 3/8 in. hex products.
Specifications
- Length: You specify
- Material: 7075-T6 Aluminum
- Weight: 0.25 lbs/ft
- Width: 0.375 in. Hex
0.5 in. Hex Hub
This is the "500EX Hex Hub" the bore is a 1/2" Hex Hole. It is a slightly different version of the 500 Hex Hub. It is manufactured differently, as it is extruded. Also, there is a 1.124" diameter boss on each side of the hub flange, providing a location for 1.125" bore flat sprockets. Are you having a hard time keeping your sprocket concentric with your hub? This hub is the trick.
This is the hub featured in the 2014 and 2015 Kit of Parts Drive Chassis and fits all AndyMark wheels.
Specifications:
- Material: 6063 Aluminum
- Bore: 1/2" Hex
- Bolt Pattern: 0.204" diameter holes, evenly spaced on a 1.875" diameter bolt circle
- Outside diameter: 2.25"
- Weight: .088
0.5 in. Round Thin Line Collar Clamp
This collar clamp is a one-piece shaft collar with a 1/2 in. bore, 0.984 in. OD, and 0.236 in. width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, easy removability, and indefinite adjustability while commonly being used for guiding, spacing, stopping, mounting, and component alignment.
Specifications:
- Material: 2024 Aluminum
- Bore: 0.500 in.
- Outside Diameter: 0.984 in.
- Thickness: 0.236 in.
- Weight: 0.017 Pounds
- Clamping Screws: M2 5x8 SHCS