Power distribution for FIRST Tech Challenge teams and hobbyists from AndyMark is here! This beautifully manufactured board is shown assembled, but ships as a kit of items. We save the fun of building for you, but we have done all the tedious soldering for you.
XT30 connectors are designed to have a reliably firm hold and provide a quality connection. With this power block easily fuse and distribute power from an XT30 power source to other XT30 devices. This board features 1 Male XT30 unfused input and 6 fused XT30 Female outputs.
Standard Mini fuses or breakers are required on each output.
FIRST Tech Challenge teams, are you looking to power more than just your Expansion Hub directly from your battery? This board, when used with 10A or 20A fuses, can power additional SPARKminis to control more motors than you are able to with the Expansion Hub alone. The board also features #6-32 mounting holes on a 16mm grid so it's easy to mount to your favorite FTC structure system.
CAD File(s)
am-4539 AndyMark XT30 Fuse Block.STEP
The NEW 40:1Tetrix Max; TorqueNADO Motor Gearboxes give more rpm when compared to the 60:1 gearbox included with the TorqueNADO motor. These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.
The Motor Mount Plate is used with the Maverick 12V DC Gear Motor (Part# 75001) to attach it inside the anyone of the U Channels 76010 to 76018. This is an example of a chassis with 4 motors mounted inside the U-Channel using a Motor Mounting Plate.
These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.
The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.
Specifcations:
The Studica Servo Arm can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.
Used with Studica Omni and Mecanum wheels for a strong axel hold.
Specifications:
PRE-ORDER Only shipping January 2023
Φ20.0mm*8.0mm thick2*M3 thread for M3 SHCSon the clamp sideΦ6.0mm D holeAL6061-T6
Φ29.0mm*16.0mm thick6*M3 thread tapping through(including 2*M3 thread for M3 SHCS)Φ6.0mm D holeAL6061-T6
This is a single sheet of 1/8 inch thick polycarbonate (PC) plastic, cut to a 24x24 inch square. This single sheet of PC will be shipped with the protective covering on both sides of the plastic sheet. Polycarbonate was invented in 1963 by Dan Fox at General Electric. GE's trade name for this plastic is LEXAN, but it also is sold under other trade names (Makrolon, Hyzod, Cyrolon).This material is NOT plexiglas or acrylic, as we don't suggest that you use that material on a mobile robot, since acrylic will easily shatter.Specifications:
The 100mm (4") Flex Wheel can be used for intake systems and conveyors.