Do you have a hard time finding some strong hex stock aluminum? We have it! This is 7075 series aluminum, which is great for use in transmission shafts.

 

Specifications:

 

• Material: 7075 Aluminum
• Width: 1/2" hex (0.496-0.499 inches)
• Weight: 0.27 pounds/ft
• Length: You specify, 1 foot, 3 feet or 6 foot in length, +/- 1"

Do you have a hard time finding some strong hex stock aluminum? We have it! This is 7075 series aluminum, which is great for use in transmission shafts.

 

Specifications:

• Material: 7075 Aluminum
• Width: 1/2" hex (0.496-0.499 inches)
• Weight: 0.27 pounds/ft
• Length: You specify, 1 foot, 3 feet or 6 foot in length, +/- 1"

This 1/2" keyed output shaft is used in the CIMple Box and SpinBox gearboxes. Specifications: Weight: 0.12 Lbs Material: 4140 Steel Hex Portion Flat to Flat: 0.5" Diameter of Large End: 0.49" Diameter of Small End: 0.37" Diameter of Magnet: 0.24" Overall Length: 2.54" 1/2" Round Portion Length: 1.875" Keyway Length: 1.43 in. Keyway Width: 0.128 - 0.131 in. Keyway Depth: 0.06 in. Large End Includes: 1/4-20 Tapped Hole 1/2" Deep

This novel style of collar clamp is split into two pieces so that it can be attached without removing any shafts. The bore is a 1/2" round hole . The flats on the perimeter allow for the collar clamp to be held in position or turned for better assembly control. 

This clamp has been designed and fabricated by BaneBots, and proudly sold through AndyMark.

Specifications:

• Material: Aluminum
• Bore: round, 1/2 inch
• Outside Diameter: 0.94 inch
• Thickness: 0.375 inch
• Width Across Flats: 7/8 inch
• Weight: 0.020 pound
• Clamping Screws: #6-32 x 1/2" long (qty. 2)

This novel style of collar clamp is split into two pieces so that it can be attached without removing any shafts. The bore is a 1/2" hex. The flats on the perimeter allow for the collar clamp to be held in position or turned for better assembly control. 

This clamp has been designed and fabricated by BaneBots, and proudly sold through AndyMark.

Specifications:

• Material: Aluminum
• Bore: hex hole, 1/2 inch
• Outside Diameter: 0.94 inch
• Thickness: 0.375 inch
• Width Across Flats: 7/8 inch
• Weight: 0.020 pound
• Clamping Screws: #6-32 x 1/2" long (qty. 2)

Plastic spacers are included with this clamp, positioned between the two halves. These are to be removed before usage.

Aluminum Clamp On Shaft Collar, 1/2" Bore 

Specifications:

• Material: Aluminum
• Diameter: 1.125 inches
• Inside Diameter: 0.500 inches
• Thickness: 0.410 inches
• Weight: 0.034 pounds

This novel style of collar clamp is split into two pieces so that it can be attached without removing any shafts. The bore is a 3/8" round hole . The flats on the perimeter allow for the collar clamp to be held in position or turned for better assembly control. 

This clamp has been designed and fabricated by BaneBots, and proudly sold through AndyMark.

Specifications:

• Material: Aluminum
• Bore: round, 3/8 inch
• Outside Diameter: 0.94 inch
• Thickness: 0.375 inch
• Width Across Flats: 7/8 inch
• Weight: 0.023 pound
• Clamping Screws: #6-32 x 1/2" long (qty. 2)

This novel style of collar clamp is split into two pieces so that it can be attached without removing any shafts. The bore is a 3/8" hex hole. The flats on the perimeter allow for the collar clamp to be held in position or turned for better assembly control. 

This clamp has been designed and fabricated by BaneBots, and proudly sold through AndyMark.

Specifications:

• Material: Aluminum
• Bore: hex hole, 3/8 inch
• Outside Diameter: 0.94 inch
• Thickness: 0.375 inch
• Width Across Flats: 7/8 inch
• Weight: 0.023 pound
• Clamping Screws: #6-32 x 1/2" long (qty. 2)

Plastic spacers are included with this clamp, positioned between the two halves. These are to be removed before usage.

Specifications:

 

• Material: Aluminum
• Diameter: 15/16"
• Inside Diameter: 3/8"
• Thickness: 5/16"
• Weight: 0.02 Lbs
• #8-32 x 3/8" tightening screw

Aluminum Clamp On Shaft Collar, 3/8" Hex Bore 

This is a wide, heavy duty, collar clamp. 

Specifications:

• Material: Aluminum
• Diameter: 0.875 - 1"
• Thickness: 0.3 - 0.34"
• Weight: 0.02 Lbs

Aluminum Clamp On Shaft Collar, 5/16 inch (8mm) Bore

This collar clamp works well as a secure clamp for the CIM Motor shaft. 

Specifications:

• Material: Aluminum
• Diameter: 11/16 inch
• Inside Diameter: 5/16 inch
• Thickness: 5/16 inch
• Weight: 0.02 pound
• #4-40 x3/8 tightening screw

This collar clamp is useful for locating and retaining items on a 6mm shaft. 

Specifications:

• Inner Diameter: 6mm
• Outer Diameter: 20mm
• Thickness: 0.217 in.
• 1.5mm Allen Wrench required

This novel style of collar clamp enables the user to fabricate a unique, oddball bore into the blank center. The flats on the perimeter allow for the collar clamp to be held in position or turned for better assembly control. Once the custom bore is added, an additional saw cut is needed to separate the two halves. Remove the two clamping screws before making these modifications.

This clamp has been designed and fabricated by BaneBots, and proudly sold through AndyMark.

Specifications:

• Material: Aluminum
• Bore: Blank, with small center-drilled divot
• Outside Diameter: 0.94 inch
• Thickness: 0.375 inch
• Width Across Flats: 7/8 inch
• Weight: 0.027 pound
• Clamping Screws: #6-32 x 1/2" long (qty. 2)

Output Drive shaft for the RAW Box

Specifications:

• Material: 4140 steel
• Length: 3.63 inch
• Shaft Diameter: 0.313 inch
• Hex Size: 0.313 inch
• Weight: 0.08 pounds

This is the 3/8" output shaft for the LJ Bevel Box gearbox (am-2622)

Specifications:

• Material: 4140 Steel
• Hex Diameter: 0.375"
• Diameter of small end: 0.249"
• Overall length: 4"
• Weight: 0.13 pounds

This is an optional long steel output shaft for the Toughbox® series gearboxes. This shaft includes a pre-installed magnet designed specifically with the E4T OEM Miniature Optical Encoder (am-3132) and SRX Magnetic Encoder (am-3445) encoder in mind. This shaft has replaced am-0801.

Specifications:

• Material: 4140 Steel
• Size at large end: 0.500-.497" across hex flats
• Diameter of magnet: 0.249"
• Overall length: 7.08" (3.5" longer than the standard shaft)
• 1/4-20 tapped hole on the large end
• Weight: 0.366Lbs