Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    assiettes

    assiettes
    Voir comme Grille Lister
    Trier par
    Affichage par page

    Super Shifter Shaft Plate (am-0361)

    #am-0361
    $23.06
    (En stock)
    This is the plate on the Super Shifter that is on the side of the output shaft.

    Super Shifter Motor Plate (am-0362)

    #am-0362
    $27.68
    (En stock)
    This is the plate on the Super Shifter that is on the motor side. This plate has a 1/4-20 steel threaded insert in one corner.

    Toughbox Mount plate for 12 tooth pinion (am-0567)

    #am-0567
    $19.99
    (En stock)
    Optional polycarbonate plate for the Toughbox gearbox. This mount plate is designed so that the motors are mounted closer to the Large Cluster Gear, so that the motor can use a 12 tooth CIM gear as the pinion. This provides an overall gear ratio of 14.9:1 for the Toughbox.

    Toughbox Mini Angled Shaft Plate

    #am-0647
    $22.00
    (En stock)

    This is the aluminum shaft plate Toughbox Mini. 

    Specifications:

    • Material: 5052 aluminum
    • Thickness: 1/8 inch
    • Weight: 0.3 pound
    • Size: 5 inch x 4.875 inch x 1 inch

    Back Plate for Worm Gearbox (am-0918)

    #am-0918
    $10.76
    (En stock)

    Sheet Aluminum Plate for back side of the Work Gearbox.

    Specifications:

    • Width: 3.625" (4.563" at tabs)
    • Height: 4.75"
    • Depth: 1.463" at L
    • Material: 6061 Aluminum (.0875" thick)
    • Weight: 0.16 Lb

    Output Plate for Worm Gearbox (am-0919a)

    #am-0919a
    $10.76
    (En stock)
    Sheet Aluminum Plate for output side of the Work Gearbox.

    End Plate for Worm Gearbox (am-0920)

    #am-0920
    $19.11
    (En stock)

    End Plate for the Worm Gearbox.

    Specifications:

    • Weight: 0.08 pounds
    • Width: 1.28"
    • Height: 4.57"
    • Depth: 0.25"
    • Material: Clear Polycarbonite

    Motor Plate for Worm Gearbox (am-0921)

    #am-0921
    $18.45
    (En stock)
    Motor mount Plate for the input motor end of the Worm Gearbox.

    Motor Plate for CIM-Sim Gearbox (am-0926)

    #am-0926
    $12.30
    (En stock)
    Sheet Aluminum Plate for the CIM-Sim Gearbox.

    TB3 Motor Plate (am-0978)

    #am-0978
    $24.60
    (En stock)

    This is the plate on the TB3 Gearbox that is on the motor side.
    Specifications:

    • Material: 6061 Aluminum
    • Size: 5" x 5" x 1/4"
    • Weight: lbs
       

    TB3 Shaft Plate (am-0979)

    #am-0979
    $15.38
    (En stock)

    This is the plate on the TB3 Gearbox that is on the shaft output side.

    Specifications:

    • Material: 6061 Aluminum
    • Size: 5" x 5" x 1/8"
    • Weight: lbs

    M3 Nylock Nut, Steel, Zinc Plated - Qty 100

    #am-1163
    $6.92
    (En stock)

    M3x0.5 Nylock Nut, Steel, Zinc Plate 

    Specifications:

    • Quantity: 100
    • Material: Steel
    • Coating: Zinc plated
    • Thread: M3x0.5
    • Width across hex: 5mm
    • Weight: 0.096 pounds

    M3 Nut, Steel, Zinc Plated - Bulk Qty

    #am-1386
    $0.16
    (En stock)
    • Grade: Class 8
    • Thread Size: 0.5
    • Thickness: 2.4 mm
    • Diameter-Thread Size: M3-0.5
    • Material: Steel

    Ball Valve, 1/4" NPT Male x Female, Lever Handle, Chrome Plated

    #am-2023
    $13.07
    (En stock)

    This is a steel ball valve, with a large plastic handle. On mobile robots, this can act as a vent valve. It has two ports, one being a 1/4" NPT male and one being a 1/4" NPT female port

    Specifications:

    • Weight: 0.19 pound
    • Width: 1.71 inch
    • Height: 1.45 inch
    • Hex Body Width: 0.82 inch
    • Material: Steel, chrome plated
    • Manufacturer: Midwest Control
    • Part Number: CMVL-25
    • Capacity: 450 psi (cold working pressure)
    • Medium: compressed air
    • Temperature Range: -4 to 250 degrees F
    • Ports: 1/4" NPT (one male, one female)

    Toughbox Mini Flat Shaft Plate (am-2230)

    #am-2230
    $15.38
    (En stock)
    This is the aluminum shaft plate Toughbox Mini with Flat Plate.

    AM Shifter Cylinder Plate

    #am-2263
    $9.23
    (En stock)

    This is to mount a pneumatic cylinder to your Shifters.

    Specifications:

    • Material: Aluminum
    • Thickness: 0.29"
    • Weight: 0.025 pounds