Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    assiettes

    assiettes
    Voir comme Grille Lister
    Trier par
    Affichage par page

    PicoBox Duo Plate (am-3405)

    #am-3405
    $10.76
    (En stock)
    This plate makes up both sides of the Picobox Duo. The plate accepts to two motors for use at the same time.

    PicoBox Uno Plate (am-3423)

    #am-3423
    $9.23
    (En stock)
    This plate makes up both sides of the Picobox Uno. This plate accepts one NeveRest Classic gearmotor

    Plate for PicoBox Solo (Motor Mount Plate) (am-3440)

    #am-3440
    $7.69
    (En stock)
    This is the plate makes up both sides of a Picobox Solo. It has mountinng holes for any NeveRest Classic motor.

    PicoBox LEO Mount Plate (am-3474)

    #am-3474
    $9.23
    (En stock)
    This is the plate on the PicoBox LEO. This is a single part mount for the NeveRest Orbital line of gearmotors. The motor mounts with 4x m3-0.5 x 6mm SHCSs (am-1254)

    PicoBox MEO Plate (am-3475)

    #am-3475
    $10.76
    (En stock)
    The PicoBox MEO plate makes up the sides of a PicoBox MEO (am-3615) gearbox. The plate features mounting holes on a 16mm grid for attaching the gearbox plate to structuring components or a TileRunner. This plate mounts one of the NeveRest Orbital gearmotors. Motors mount with 4 m3-0.5 x 6mm socket head cap screws (am-1254).

    PicoBox GEO Plate (am-3476)

    #am-3476
    $10.76
    (En stock)
    The PicoBox GEO plate makes up both sides of the PicoBox GEO (am-3616) gearbox. The plate features mounting holes on a 16mm grid for attaching the gearbox plate to structuring components or a TileRunner. This plate mounts two of the NeveRest Orbital gearmotors. Motors mount with 4 m3-0.5 x 6mm socket head cap screws (am-1254).

    AM14U Family XL End Plate

    #am-3513
    $60.00
    (En stock)

    This sheet metal plate makes up the end plate of the AM14U family of drive chassis. This plate captures the Inner and Outer plate and provides a surface to mount upper structures.

    Specifications:

    • Height: 3.33"
    • Length: 38.0"
    • Thickness: 0.125"
    • Hole Size: 0.210"
    • Upper Hole Pattern: Two rows 1.0" apart, 0.5" between holes in each row.
    • Upper Flange Length: 2.125"
    • Lower Hole Pattern: 0.5" Spacing
    • Lower Flange Length: 1.375"
    • Material: 5052 Aluminum

    Motor Plate for 2 Stage 2 Motor EVO Shifter (am-3526)

    #am-3526
    $46.13
    (En stock)

    This is the motor plate for all 2 Stage 2 Motor EVO Shifter transmissions. This plate in conjunction with an EVO Shifter 2 Stage Output Plate captures the internal components of a 2 Stage 2 Motor EVO Shifter. This plate has the mounting features for two CIM motors.

    Specifications:

    • Width: 5.4"
    • Height: 5.2"
    • Thickness: 0.25"
    • Material: 6061 Aluminum
    • Weight: 0.318 Lbs

    Motor Plate for 2 Stage 3 Motor EVO Shifter (am-3527)

    #am-3527
    $49.36
    (En stock)

    This is the motor plate for all 2 Stage 3 Motor EVO Shifter transmissions. This plate in conjunction with an EVO Shifter 2 Stage Output Plate captures the internal components of a 2 Stage 3 Motor EVO Shifter. This plate has the mounting features for three CIM motors.

    Specifications:

    • Overall Width: 5.4"
    • Overall Height: 6.1"
    • Thickness: 0.25"
    • Material: 6061 Aluminum
    • Weight: 0.336 Lbs

    Output Plate for 2 Stage EVO Shifter (am-3528)

    #am-3528
    $43.05
    (En stock)

    This is the output plate for all 2 Stage EVO Shifter transmissions. This plate in conjunction with an EVO Shifter 3 Motor or 2 Motor Plate, captures the internal components of the EVO Shifter. The output shaft of the transmission protrudes out of this plate when assembled.

    Specifications:

    • Overall Width: 4.8"
    • Overall Height: 5.2"
    • Thickness: 0.25"
    • Material: 6061 Aluminum
    • Weight: 0.254 Lbs

    Motor Plate for 3 Stage 2 Motor EVO Shifter (am-3529)

    #am-3529
    $49.20
    (En stock)

    This is the motor plate for all 3 Stage 2 Motor EVO Shifter transmissions. This plate in conjunction with an EVO Shifter 3 Stage Output Plate captures the internal components of a 3 Stage 2 Motor EVO Shifter. This plate has the mounting features for two CIM motors.

    Specifications:

    • Overall Width: 5.5"
    • Overall Height: 6.0"
    • Material Thickness: 0.25"
    • Material: 6061 Aluminum
    • Weight: 0.33 Lbs

    EVO Shifter 3 Stage 3 Motor Plate (am-3530)

    #am-3530
    $49.20
    (En stock)

    This is the motor plate for all 3 Stage 3 Motor EVO Shifter transmissions. This plate in conjunction with an EVO Shifter 3 Stage Output Plate captures the internal components of a 3 Stage 3 Motor EVO Shifter. This plate has the mounting features for three CIM motors.

    Specifications:

    • Material: 6061 Aluminum
    • Overall Height: 6.854 in.
    • Overall Width: 4.998 in.
    • Thickness: 0.25 in.
    • Weight: 0.326 lbs

    Output Plate for 3 Stage EVO Shifter(am-3531)

    #am-3531
    $43.05
    (En stock)

    This is the output plate for all 3 Stage EVO Shifter transmissions. This plate in conjunction with an EVO Shifter 2 Motor or 3 Motor Plate captures the internal components of the EVO Shifter. The output shaft of the transmission protrudes out of this plate when assembled.

    Specifications:

    • Overall Width: 3.9"
    • Overall Height: 6.4"
    • Material Thickness: 0.25"
    • Material: 6061 Aluminum
    • Weight: 0.274 Lbs

    550 Vent Plate Spacer

    #am-3649
    $7.69
    (En stock)

    This product is designed to be placed between a high power 550 motor and the motor mount plate of a gearbox. It allows air to enter from the side and pass through the motor via the vent holes in the front face of the motor. Allowing this airflow typically requires machine time and customization of gearboxes. This simple lightweight spacer is the perfect solution for motor preservation.

    Usage:

    • When installing a motor to a gearbox motor plate, first place this spacer over the nose of the motor. Line the outer circle of holes in the spacer with the mounting holes of your 550 motor. Secure the the gearbox motor plate to the motor like normal.


    Specifications:

    • Material: 6061 Aluminum
    • Thickness: 0.06 in.
    • 4 holes 0.124 in. diameter on a 0.984 in. circle
    • Weight: 0.002 lbs

    775 Vent Plate Space

    #am-3650
    $12.00
    (En stock)

    This product is designed to be placed between an AndyMark RedLine Motor (am-3775) or high power 775 motor and the mount plate of a gearbox. It allows air to enter from the side and pass through the motor via the vent holes in the front face of the motor. Allowing this airflow typically requires machine time and customization of gearboxes. This simple lightweight spacer is the perfect solution for motor preservation. 

    Usage:

    • When installing a motor to a gearbox motor plate, first place this spacer over the nose of the motor. Line the outer circle of holes in the spacer with the mounting holes of your 775 motor. Secure the the gearbox motor plate to the motor. 


    Specifications:

    • Material: 5052 Aluminum
    • Thickness: 0.06 in.
    • 4 holes 0.165 in. diameter on a 1.14 in. circle
    • Weight: 0.002 lbs

    S3, 32mm Pulley Plate

    #am-3686-32
    $3.08
    (En stock)

    The 32mm Pulley Plate is one of two pulley plates available in the S3 Ecosystem. Two of these plates in conjunction with standoffs, screws, and a nub create an effective and robust winch, am-3729 (coming soon). 

    It has a central bolt pattern for an AndyMark XL Nub (am-3441a) or the 0.770 in. bolt circle used with the Actobotics building system. The outside diameter of this plate matches the root diameter of a 24 Tooth Ninja Star Sprocket (am-3283). This allows it to be used as an idler chain guide.

    Specifications:

    • Material: 5052 Aluminum
    • Weight: 0.019 Pounds
    • Thickness: 2.29mm (0.09")
    • Diameter: 1.782"
    • Bore: 8mm
    • Holes:
      • 6 holes, 0.150" in diameter on a 32mm (1.26") bolt circle
      • 4 holes, 0.150" in diameter on a 0.770" bolt circle
      • 4 holes, 0.150" in diameter on a 16mm (0.630") bolt circle