Battery Flag

Tip-to-tip length is approximately 12.6 inches. Want it longer or shorter? We offer this cable in custom lengths! Both end connectors are crimped with a 6-ton pneumatic crimping tool. One end has connections to attach to the battery and the other has an SB50 Anderson Connector. This cable is resistant to oil, most acids, grease, and even abrasion! That's a TOUGH cable.

Which do you prefer a stiff cable or a flexible cable? No matter your choice we have the best option in either camp. PVC insulated cables create a stiff wire route maintaining shape for repeatable connections. EPDM jacketed cables cand bend and twist to accommodate tight spaces and small places.

Specifications

• Connector : SB50, 1/4 in. Ring Terminal
• Gauge: 6
• Insulation: PVC or EPDM
• Operating Temperature: 257°F to -59°F
• Stranding: 263 inside EPDM Jacketed Wire
• Voltage: 60V Max
• Wire Type: Stranded

This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

Specifications

• Gauge: 06 AWG
• Hole Size For Stud: 0.25 in.
• Material: Copper
• Overall Length: 2.03 in.
• Tongue Width: 0.48 in.
• Weight: 0.01 lbs
• Wire Strip Length: 1.18 in.

The MK ES17-12, 12 Volt, 18 amp-hour sealed lead acid battery with nut and bolt connector has proven to be a trustworthy power source for many FIRST Robotics Competition robots. 

The batteries will be packed within a 7"x7"x7" box (aka: interior box). A 3/4" layer of closed-cell foam will be packed around the interior box, within a 9"x9"x9" box. The entire weight of this double box packing assembly will be approximately 29 pounds.

Two (2) batteries are shipped within one box for this price.

Omni-directional wheels in the smallest diameter offered by any common FIRST Robotics Competition or FIRST Tech Challenge supplier.

These 50 mm / 2 inch omni wheels features two different durometers:

• Soft 35A rollers for high traction
• Hard 90A rollers for long life

They also have a standard 14 mm Hex Bore, letting you choose between 3 different bores:

• 0.375 in. Hex - includes 14 mm Hex to 3/8 in. Hex Adapter (am-3905)
• 0.5 in. Hex - includes 14 mm Hex to 1/2 in. Hex Adapter (am-3904)
• 14 mm Hex - no adapters included

Stack several of these wheels on a shaft to craft an unstoppable intake system for your robot that can be used to center game pieces.

Specifications

• Bore: 0.375 in. Hex, 0.5 in. Hex, 14 mm Hex
• Diameter: 50 mm, 1.96 in.
• Durometer: 35A, 90A
• Load Capacity: 10 lbs
• Material: Glass Filled Nylon Body, Acetal Inserts, Thermoplastic Elastomer Rollers
• Weight: 0.076 lbs

iCrimp Cable Lug Crimping Tool for Heavy Duty Wire Lugs,Battery Terminal,Copper Lugs AWG 8-1/0

•  6 dies in AWG: 8,6,4,2,1,1/0
•  Hexagonal rotating dies are processed with Wire EDM Cutting, more accurate than normal casting dies.
•  Comfortable grip with antislip surface saves strength and improves user’s experience.
•  Made of high quality carbon steel which can offer long service life.
• Compatiable with copper&aluminum cable lug,non-welding and standard electrical connection.

Affordable and durable 2 inch squish wheels are now available. These wheels are commonly used by competitive robotics teams to move game pieces throughout their robot.

These wheels ship in packs of 10 for $3 per wheel and feature:

• 30A durometer TPE rubber material for maximum squishability
• .375 inch hex hole, intended to be stretched and used on 1/2 inch hex shafts or other larger OD tubes. Each wheel is 1/2 inch thick.
• Weight: .038 lbs per wheel
• STEP CAD file available

Note: Setup directions for this radio can be found here, http://wpilib.screenstepslive.com/s/4485/m/13503/l/144986?data-resolve-url=true&data-manual-id=13503.

Product Overview: 
Announced as the 2017 Radio for the FIRST Robotics Competition: http://www.firstinspires.org/robotics/frc/blog/2017-control-system-update To comply with new FCC (USA) and IC (Canada) regulations, this device does not allow non-Open Mesh firmware to be loaded, and no SSH access within the US or Canada. It also requires a new approval process for custom.sh files
This radio will ship with default firmware and is only allowed to be used with Open Mesh firmware and FIRST Robotics Competition approved firmware.

Compact size perfect for robot applications where WiFi is needed, including in the FIRST Robotics Competition environment. High speed, dual band 1.17 Gbps (300+867 Mbps) 802.11ac mini cloud-managed access point with 802.3af PoE support, dual Gigabit Ethernet ports and four internal antennas.

Power Supply is not included with this Radio, 12V - 24V DC @ 1A Input, or PoE (24V Passive PoE or 48V 802.3af PoE)

This radio is available to FIRST teams at a set price, please contact [email protected] if FIRST team price not shown.

Warranty Info:
Please contact Open Mesh for warranty issues or Return Merchandise Authorizations (RMA) for this product. Fill out this form to begin the process, http://www.open-mesh.com/rma

Specifications:

• Speed: 1.17 Gbps (300+867 Mbps)
• Radio: 802.11b/g/n 2.4 GHz + 802.11a/n/ac 5 GHz
• Antenna: Two internal dual band 2x2 (2.4 GHz) + 2x2 (5 GHz)
• Power: 19 dBm (79 mw) flat power
• Range (approximate): 25-50’ indoor (1-2 walls) 100’ outdoor
• Processor: 720 MHz QCA9557 + QCA9882 MIPS 74K
• WLAN Standard: 802.11a/g/n/ac 2.4 + 5 GHz
• Memory: 128MB DRAM
• Ethernet (WAN and LAN): 2 x Gigabit
• Size: 3.75” x 2.75” x 1”

Features: 

• Dual Band 802.11ac
  • Deploy concurrent 2.4GHz + 5GHz ac-ready networks to let newer phones, tablets and laptops fly while still supporting legacy devices.
• High performance
  • The OM5P-AC is available in a 2x2, 1.17 Gbps MIMO configuration for exceptional speed over short distances in dense environments.
• 802.3af PoE
  • Support for 802.3af PoE and 12-24v passive PoE to power your access points up to 300 feet away over a single Ethernet cable.

Our Robot Signal Light is designed to work with the robo-RIO's RSL port to provide a quick visual indicator of robot status. This is not the 855PB-B12ME522 light specified by R70 of the 2017 FIRST Robotics Competition manual, but it does provide similar functionality.

We're offering this product so teams can use all the diagnostic features of the robo-RIO at an affordable price when legality and compactness isn't a priority. Our light housing is larger, and it is wired with two spade connectors. There is no polarity on the light housing, so it is not possible to wire backwards. 

To wire this light, we recommend our 2-wire cable (am-2133) and either soldering to the spade connections or using a female spade connector available separately.

Specifications:

• Weight: 0.1085 pounds without lead wires
• Height: 3.23 in. from top of dome to bottom of mounting stem
• Dome height: 2.09 in.
• Dome diameter: 2.24 in.
• Mounting stem diameter: 0.850 in.
• Mounting threads: M22x1.5, nut included

This is a product created by eStop Robotics. The genius of this design is the molded piece that interfaces with features in the 12 volt sealed battery used in competition robotics. The Battery Base molded plastic piece interfaces with a robot battery, while the fastening strap holds the battery onto the Battery Base. This provides a secure method of mounting a battery to a mobile robot base.

This 120 Amp Circuit breaker forms the main circuit breaker for FIRST Robotics Competition robots. It can protect your robot or other system from drawing so much current that systems receive more damage. Of course, we highly recommend using circuit breakers downstream rated for less to protect your motors, speed controllers, and control system components.

Specifications:

• Weight: 0.24 pounds
• Size: 2.9 x 1.9 x 1.5 inches
• Surface Mount Style
• Terminal Supply part number: CB3-SM-120
• Type III Breaker Manual Reset