INTO THE DEEP℠ Tape Set

Pitsco Clearly Solar Car Kit is more than a build-and-run activity kit. With this solar car, you can change the solar panel angle, try out different gear combinations and switch the two solar panels from series to parallel circuit (or vice versa). These features enable students to test a variety of variables.

This fastener is used with Panel Links to connect panels for a FIRST Tech Challenge Perimeter.

Build high-response robots with the LEGO^® Technic^™ Medium Angular Motor featuring low-profile design, integrated rotation sensor with absolute positioning and 1-degree accuracy.

• Ideal for lower-load, fast-response applications.
• Low-profile design for smaller models where space is limited.
• Absolute positioning and integrated rotation sensor for true straight-line control.
• Tacho feedback control for 1° accuracy.
• Zero-point markings for simple calibration.
• Simple form factor for quick building and rebuilding.

These aluminum 5M HTD Pulleys work great for creating belt reductions directly off the motor. Use a 15mm wide belt or two 9mm wide belts as the inside pulley teeth are 18.5mm wide. Choose either 8mm keyed bore or spline bore depending on the motor type you're using.

Use this 10-cell, 12-volt rechargeable pack to bring long-lasting power to TETRIX^® motors and electronics. This 3,000 mAh NiMH pack features a built-in, 20-amp replaceable fuse for safety.

(THIS BATTERY IS FTC LEGAL)

This set of 12 pieces includes,

• 2 x 20cm 22AWG Cables with Dupont TJC8 2.54mm 3 pin, female to female connectors
• 2 x 40cm 22AWG Cables with Dupont TJC8 2.54mm 3 pin, female to female connectors
• 2 x 60cm 22AWG Cables with Dupont TJC8 2.54mm 3 pin, female to female connectors
• 6 x 3pin Dupont male to male connectors

This extension cable has one male and one female connector and is 50 cm long.  You will receive 2 cables.

The XT30 is keyed and locking for better reliability.

Specifications

• Length: 50 cm

This is a 25 foot section of a twisted pair of 22 AWG wire.

Specifications

• Gauge: 22 AWG
• Length: 25 feet

Specifications:

• 7 color pcs
• 1.5, 2, 2.5, 3, 4, 5, 6
• Non-slip handle
• ball-end and straight-end
• S2 Hardness
• Non-corrosive
• Weight: 0.118kg

This power switch is legal for use in FTC competition.

This switch makes for a simple and satisfying power switch for a robot. It features easy to use XT30 connectors.

We've specially designed the mounting bracket to be compatible with most building systems..