Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Des vis

    Des vis
    Voir comme Grille Lister
    Trier par
    Affichage par page

    #10-24x3/4 Thread Forming Screw Minimum Qty 10

    #am-1123
    $0.31
    (En stock)

    This is a Trilobe, thread forming, or thread rolling screw, ideal for applications where the screw is being threaded into plastic or metal. 

    A flat washer is part of the 5/16 hex head, providing more surface area contact than a regular hex head. The increased bearing area decreases the likeliness of crushing mating surfaces. Trilobe, or Thread Rolling, screws have a blunt tapered point that requires a pre-drilled or punched hole; eliminates chips and permits replacement with standard screw. Zinc plating froms a zinc carbonate film that greatly retards the corrosion rate in a normal atmosphere, which is similar to the aluminum oxide film that forms on aluminum that accounts for its low corrosion rate. 

    Product Overview:

    • Quantity: 50
    • Diameter: #10
    • Finish: Zinc
    • Head: 5/16 Hex with integral washer
    • Thread Length: 3/4"
    • Material: Steel
    • Thread Size: 10-24
    • Thread Type: Trilobe, Thread Rolling
    • Weight per Screw: 0.007 lbs
    • Package Weight: 0.34 lbs

    #10-32 x 0.375" Pan Head Phillips Screw - Min 25

    #am-1028
    $0.07
    (En stock)

    Specifications:

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: 10-32
    • Length: 3/8"
    • Head: Pan Head Phillips

    #10-32 x 0.625" SHCS - Min 25

    #am-1120
    $0.47
    (En stock)

    Specifications:

     

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 10-32
    • Length: 5/8 inch
    • Head: Socket Head Cap Screw
    • Yellow Nylon Thread Lock Patch

    #10-32 x 1.5" SHCS - Min 25

    #am-1014
    $0.38
    (En stock)

    Statistics:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: #10-32
    • Length: 1-1/2 inch
    • Head: Socket Head Cap Screw

    #10-32 x 1.75" SHCS - Min 25

    #am-1048
    $0.38
    (En stock)

    Specifications:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 10-32
    • Length: 1-3/4"
    • Head: Socket Head Cap Screw

    #10-32 x 2" SHCS - Qty 25

    #am-1049
    $12.30
    (En stock)

    #10-32 x 2" long Socket Head Cap Screw 

    Specifications:

    • Quantity: 25
    • Material: Steel
    • Coating: Zinc plated
    • Thread: #10-32
    • Length: 2 inch
    • Head: Socket Head Cap Screw
    • Weight: 0.422 pounds

    #10-32 x 2.25" SHCS - Qty 25

    #am-1198
    $30.75
    (En stock)

    #10-32 x 2-1/4" long Socket Head Cap Screw 

    Specifications:

    • Quantity: 25
    • Material: Steel
    • Coating: Zinc plated
    • Thread: #10-32
    • Length: 2-1/4 inch
    • Weight: 0.478 pounds
    • Head: Socket Head Cap Screw

    #4-40 x 0.75" 0.625" Shoulder SHCS

    #am-1423
    $11.54
    (En stock)

    This steel shoulder screw is used in the EVO Shifter Four Tooth Dog Gear (am-3568).

    Specifications:

    • Thread: #4-40
    • Length: 0.75"
    • Thread Length: 0.125"
    • Weight: 0.006 Lbs
    • Head: Socket Head Cap Screw

    #4-40 x 0.875" 0.5" shoulder SHCS

    #am-1272
    $3.85
    (En stock)

    #4-40 x 7/8" Long with 1/2" shoulder Socket Head Cap Screw used in the Dog Gear

    Specifications:

    • Quantity: 1
    • Thread: #4-40
    • Length: 7/8 inches
    • Shoulder Length: 1/2 inches
    • Weight: 0.001 pounds
    • Head: Socket Head Cap Screw

    #6-32 x 1.25" Head Head - Min 25

    #am-1437
    $0.23
    (En stock)

    These 6-32 1.25" Hex Head Machine Screw can be used for fastening Nubs to other motion products.

    Specifications:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 6-32
    • Length: 1.25"
    • Head: Hex
    • Weight: 0.0045 lbs

    #8-15 x 0.625" Pan Head Phillips - Min 25

    #am-1291
    $0.31
    (En stock)

    These screws are used within the FIRST STEAMWORKS? Gear. The FIRST STEAMWORKS? Gear uses 20 screws for assembly. This screw is available in quantities of 25, giving you a few extras when assembling.

    Specifications:

    • Diameter: #8
    • Diameter - Thread Size: #8 - 15
    • Drive: Phillips
    • Drive Size: #2
    • Finish: Zinc
    • Head: Pan
    • Length: 5/8"
    • Material: Steel

    1/4-20 x 0.5" BHCS - Min 25

    #am-1039
    $0.50
    (800 En stock)

    Specifications:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 1/4-20
    • Length: 1/2"
    • Head: Button Head Cap Screw

    1/4-20 x 0.75 in. Self Tapping Hex Washer Head Screw

    #am-1310
    $1.20
    (0 En stock)

    This is a thread rolling screw that is 0.75 in. long.

     

    This item can only be purchased in multiples of 10

     

    Specifications

    • Drive: 3/8 in. Unslotted Hex
    • Finish: Zinc
    • Length: 0.75 in.
    • Material: Steel
    • Thread: 1/4-20
    • Weight: 0.02 lbs

    1/4-20 x 1 in. Thread Forming Screw Hex Washer Head

    #am-1182
    $1.25
    (178 En stock)

    This item can only be purchased in multiples of 10

     

    This 1/4-20 screw is 1 in. long. This screw is thread forming which means it creates a secure connection with the parts it attaches to without the use of a nut.

     

    Specifications

    • Drive: 3/8 in. Unslotted External Hex
    • Finish: Zinc
    • Head: Hex Washer
    • Length: 1 in.
    • Material: Steel
    • Thread: 1/4 -20
    • weight: 0.016 lbs

    1/4-20 x 1.25" BHCS

    #am-1183
    $0.38
    (En stock)

    Specifications:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 1/4-20
    • Length: 1.25"
    • Head: Button Head Cap Screw

    1/4-20 x 1.5" SHCS

    #am-1131
    $0.62
    (En stock)

    Specifications:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 1/4-20
    • Length: 1.5"
    • Head: Socket Head Cap Screw