Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Engrenages

    Engrenages
    Voir comme Grille Lister
    Trier par
    Affichage par page

    19T 32DP 0.375" Hex Bore, Steel Gear

    #am-2337
    $21.53
    (En stock)

    Specifications:

    • Material: 1215 Steel
    • Teeth: 19
    • Diametral pitch: 32
    • Pitch diameter: 0.59375"
    • Bore: 0.376" Hex Bore
    • Face Width: 0.44"

    20 Tooth 32 DP 0.375 in. Round Bore Steel Gear for EVO Encoder

    #am-3532
    $15.00
    (En stock)

    This gear is a press fit gear specifically designed for the 2 Stage EVO Shifter Output shafts, as part of the encoder setup.

    Specifications:

    • Tooth Count: 20
    • Diametral Pitch: 32
    • Pressure Angle: 20
    • Pitch Diameter: 0.625"
    • Face Width: 0.62"
    • Material: 1117 Steel
    • Bore: 0.372" Round
    • Weight: 0.03 Lbs

    20T 05" Hex Bore Miter Gear

    #am-3772
    $33.83
    (22 En stock)

    Miter gears are a special class of bevel gears where the shafts intersect at 90° and the gear ratio is 1:1. This miter gear has a .500" hex bore, making it perfect for interfacing with many popular products in the competition robotics marketplace.

    Specifications:

    • Material: 1045 Steel
    • Module: 1.25
    • Tooth Count: 20
    • Pressure Angle: 20
    • Pitch Diameter: 0.980 in
    • Mounting Distance: 0.910 in
    • Hub Depth: 0.350 in
    • Hub Diameter: 0.870 in
    • Bore: 0.50 in Hex
    • Weight: 0.056 Pounds

    20T 1.25 Module 8mm Round Bore with 2mm Keyway, Steel Bevel Gear

    #am-2621
    $44.59
    (En stock)

    This 20 tooth bevel gear is paired with a 40 tooth bevel gear (am-2620) to make the LJ Bevel Box (am-2622)

    Specifications:

    • Material: 4020 Steel
    • Module: 1.25
    • Number of teeth: 20
    • Pitch diameter: 25mm
    • Bore: 8mm with 2mm Key
    • Weight: 0.09 pound

    20T 20 DP 14.5 PA 0.375 in. Hex Bore Gear

    #am-3820
    $21.53
    (En stock)

    Specifications:

    • Tooth Count: 20
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 1 in.
    • Face Width: 0.375 in.
    • Material: 4140 Steel
    • Bore: 0.375 in.
    • Weight: 0.07 Pounds

    20T, 8 mm Bore with 2 mm Keyway Miter Gear

    #am-3776
    $33.83
    (En stock)

    Miter gears are a special class of bevel gears where the shafts intersect at 90° and the gear ratio is 1:1. This miter gear has a 8mm bore with a 2mm keyway, fitting perfectly on a CIM motor shaft. 

    Specifications:

    • Material: 1045 Steel
    • Module: 1.25
    • Tooth Count: 20
    • Pressure Angle: 20
    • Pitch Diameter: 0.980 in
    • Mounting Distance: 0.910 in
    • Hub Depth: 0.350 in
    • Hub Diameter: 0.870 in
    • Bore: 8 mm with 2 mm keyway
    • Weight: 0.078 Pounds

    24T 20 DP 0.375" Hex Bore, Steel Gear

    #am-3485
    $19.99
    (En stock)

    Specifications:

    • Tooth Count: 24
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 1.2"
    • Face Width: 0.375"
    • Material: 4140 Steel
    • Bore: 0.375" Hex
    • Weight: 0.1 Lbs

    24T 20DP 0.5" Hex Bore, Steel Gear

    #am-2459
    $18.45
    (0 En stock)

    Specifications:

    • Material: 4140 steel, cold formed
    • Diametral pitch: 20
    • Pressure angle: 14.5
    • Number of teeth: 24
    • Pitch diameter: 1.2 inch
    • Bore: 1/2" Hex (0.501-505 inch)
    • Thickness: 0.38
    • Weight: 0.086 pound

    25T 20 DP 0.500" Hex Bore, Steel Gear

    #am-3535
    $18.45
    (4 En stock)

    Specifications:

    • Tooth Count: 25
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 1.25"
    • Face Width: 0.5"
    • Material: 4140 Steel
    • Bore: 0.5" Hex

    28T 20DP FlexHub Bore, Steel Gear

    #am-2346
    $19.22
    (En stock)
    Introducing FlexHub, designed by engineers from iR3 Creative Engineering, from Orlando, Florida. FlexHub is a modular gear & hub solution from iR3 Creative. The concept is pretty simple. There is a hub, there is a gear, there are two retaining rings. Put them together into your assembly. If the gear ratio / shaft size / output / whatever isn’t working rinse and repeat with a new hub or gear

    29T Gear, 20dp, 500 hex for SpinBox

    #am-2461
    $19.99
    (0 En stock)

    Specifications:

    • Material: 4140 steel, cold formed
    • Diametral pitch: 20
    • Pressure angle: 14.5
    • Number of teeth: 29
    • Pitch diameter: 1.45 inch
    • Bore: 1/2" Hex (0.501-505 inch)
    • Thickness: 0.38
    • Weight: 0.14 pound

    30 Tooth 20 DP 0.375" Hex Bore, Steel Gear

    #am-3536
    $21.53
    (0 En stock)

    Specifications:

    • Tooth Count: 30
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 1.5"
    • Face Width: 0.357"
    • Material: 4140 Steel
    • Bore: 0.375" Hex

    32 Tooth 20 DP 4 Tooth Steel Dog Gear

    #am-3489
    $26.14
    (En stock)

    Specifications:

    • Tooth Count: 32
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 1.6"
    • Face Width: 0.438"
    • Material: 4140 Steel
    • Dog Profile: 4 Tooth, 90 Degrees Opposed
    • Bearing Bore: 1.124"
    • Weight: 0.125 Lbs

    32 Tooth 20DP 14.5PA 0.5" Hex Bore Gear

    #am-3815
    $23.06
    (En stock)

    Specifications:

    • Tooth Count: 32
    • Diametral Pitch: 20
    • Pressure Angle: 14.5
    • Pitch Diameter: 1.6 in.
    • Face Width: 0.375 in.
    • Material: 4140 Steel
    • Bore: 0.50 in. Hex
    • Weight: 0.11 Pounds

    32T 20DP 10mm Round Bore with 4mm Keyway, Steel Gear

    #am-2631
    $23.06
    (En stock)

    This gear fits on the PG27, PG71, and PG188 10mm output shaft. It is used in the AM Turret.

    Specifications:

    • Number of teeth: 32
    • Diametral pitch: 20
    • Pitch diameter: 1.6 inch
    • Pressure angle: 14.5 degrees
    • Face width: 0.4 inch
    • Overall width: 0.4 inch
    • Bore: 10mm (0.395 inch) diameter hole w/ 4mm (0.158 inch) keyway
    • Material: 4140 steel, cold formed into gear teeth
    • Weight: 0.2 lbs.

    32T 20DP FlexHub Bore, Steel Gear

    #am-2347
    $19.99
    (En stock)
    Introducing FlexHub, designed by engineers from iR3 Creative Engineering, from Orlando, Florida. FlexHub is a modular gear & hub solution from iR3 Creative. The concept is pretty simple. There is a hub, there is a gear, there are two retaining rings. Put them together into your assembly. If the gear ratio / shaft size / output / whatever isn’t working rinse and repeat with a new hub or gear.