Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Entretoises et rondelles

    Kits de compétition
    Voir comme Grille Lister
    Trier par
    Affichage par page

    Studica Robotics FTC Starter Kit (2024-2025)

    #70408
    $1050,00
    (En stock)

    New for the 2024-2025 Season

     

    Download the Kit List FTC Starter Kit 2024-2025.
     

     

     

    This kit does not include any control system components.

     

     

    Check out this robot we created with the FTC Starter Kit for the 2024-2025 INTO THE DEEP Challenge!

    6mm D-Shaft and Spacer Bundle

    #70256
    $63,38 $62,51
    (En stock)

    Includes,

    • 2 x 76162-2 - 6mm x 432mm D-Shaft (2 pack)
    • 2 x 76161-6 - 6mm x 96mm D-Shaft (6 pack)
    • 2 x 76160-6 - 6mm x 70mm D-Shaft (6 pack)
    • 1 x 76159-6 - 6mm x 35mm D-Shaft (6 pack)
    • 1 x 76303-2 - Coupling 6mm ID D-Shaft, 12mm OD (2 pack)
    • 2 x 76308-6 - Shaft Spacer Plastic 6mm ID x 10mm OD x 20mm L (6 pack)
    • 3 x 76304-6 - Collar 6mm ID D-Shaft, 12mm OD (6 pack)
    • 2 x 76306-24 - Shaft Spacer Plastic 6mm ID x 10mm OD x 2mm L (24 pack)
    • 2 x 76305-24 - Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (24 pack)

    WorldSkills Mobile Robotics Junior Collection

    #70301
    $3308,45 $3262,95
    ( 0 En stock)

    The WorldSkills Mobile Robotics Junior Collection by Studica is the authorized collection for the WorldSkills Asia Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including controller, electronics, motors, structure, gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs.

    Mobile Robotics VMX/Titan Workshop Kit

    #70203
    Demander un devis

    The WorldSkills Mobile Robotics VMX/Titan Workshop Kit is used in the classroom for teaching, testing and doing research in mobile robotics. It includes each the essential components and is referenced in the WorldSkills Mobile Robotics Shanghai 2022 training material.

    VMX FRC Training Bot

    #74000
    Demander un devis

    The Studica VMX FRC-compatible Training Bot (FRC Trainer) is a smaller, sturdy, lightweight, and less expensive robot than your typical FRC robot. If you have a large FRC team, often only a handful of students get to learn how to create and program your team’s costly competition robot.  The FRC Trainer solves this problem and is ideal for groups of two to three to participate in hands-on learning in a classroom environment.  Schools can equip their labs with multiple FRC Trainers, benefiting from the great value and compact size. Students can even take it home with them! 

    This affordable solution is intended for:

    • FRC teams that want to learn and train on a smaller and more affordable robot,
    • Schools looking for a way to teach FRC robotics in the classroom.
    • Schools that want to teach coding in the classroom through robotics.

    The FRC-compatible Trainer is an intelligent and autonomous robot that uses the VMX Advanced Robotics Controller which can be programmed in C++ and Java.  VMX’s multitude of modern digital communications interfaces and Linux-based operating system allow users to directly access most modern devices (e.g., Intel RealSense tracking and depth cameras and LIDAR).

     

    Download BOM here

     

    Skills Canada Mobile Robotics Collection 2024

    #SC2023
    $1295,00
    ( 0 En stock)

    The Skills Canada Mobile Robotics Collectionis the official collection for the Skills Canada Mobile Robotics Competition.

     

    The set includes the TETRIX PRIZM® Robotics Controller, TETRIX Tele-Op Control Module, and PS4 DUALSHOCK 4 controller, providing teams limitless programmable remote-control execution. Program the PS4 controller to complete actions or a sequence of actions at the touch of a button. Control speed with the swipe of the finger. With the PRIZM controller and Tele-Op module, there are infinite opportunities for behaviors and movements at your fingertips.

     

    The Skills Canada Mobile Robotics Collection has over 702 Structural component and hardware elements parts including anodised aluminum channel, brackets, clamps, shaft hubs, steel axles, gears, bar beams, spacers, bushings, set collars, anchor blocks, couplers, rack and pinion elements, 2 x 12 volt DC Motors with encoders, 1 x continuous servo Motor, 2 x standard servo motor, optical encoders, mounting brackets, bearings, 4 Wheels, axle couplers, bushings, sprockets, shaft hubs and chain, and a vast assortment of fasteners, socket head screws, button head screws, Lock nuts etc.

     

    TETRIX® PRIZM™ features:

     

    • 32 KB flash programmable memory
    •  ATmega328P processor with Arduino Optiboot bootloader installed
    •  4 digital sensor ports (D2 can be used as a serial port) and 3 analog sensor ports
    •  1 I2C port, 1 USB programming port, 1 motor controller expansion port, and 2 quadrature encoder input ports
    • 2 high-current DC motor control ports
    •  6 standard control servo ports and 2 continuous rotation (CR) servo ports
    •  Battery connection port (additional port used to daisy-chain power to other devices)
    •  Programmable Start button (green) and a non-programmable Stop/Reset button (red)
    •  Comes with USB cable, power switch, motor cables, and a Quick-Start Guide
       

    Studica Robotics Classroom Kit

    #70405
    Demander un devis
    (En stock)

    From Competition to Classroom, the Studica Robotics Classroom Kit is ideal for classroom Robotics programs.  This kit will allow for instruction on Robotics Design, CAD, Prototyping, Building, and Programming.  Reach more students with important Curriculum Correlations to Coding, Manufacturing, Tech Design, and Engineering while teaching robotics in the classroom with the Studica Robotics Classroom Kit.

     

    Download the Kit List here.

    FTC Drive Base Chassis Kit

    #70400-v2
    $699,00

    The FTC Drive Base Kit v2 (70400-v2) is an upgrade from our first version (part # 70400). It includes our new slim mecanum wheels with bearings on all rollers, allowing you to make a wider base robot. It also has 4 NeveRest Orbital 20 Gearmotors with encoder cables, the new Clamping Shaft Hubs, 4 bumpers and complete hardware to complete the chassis.

    FTC Power Block XT30

    #70407
    $15,00 $13,88
    ( 749 En stock)

    Rev up your robot's performance with the FTC Power Block, a game-changer in facilitating seamless power connections for various devices throughout your FTC robot. This powerhouse accessory ensures that your robot operates at its full potential, delivering unmatched reliability and efficiency. Say goodbye to power-related hiccups and hello to a smoother, more robust robot performance with the FTC Power Block.


    Specifications:

    • Input: XT30 Male 
    • Output: XT30 Female
    • Total Connections: 9
    • Max Current: 20A Shared

    Step File

    Maverick Encoder Cable for FTC

    #70163
    $5,70 $5,54
    (En stock)

    The Maverick Encoder Cable for FTC will connect the Maverick DC Gear Motor to the REV Control Hub.

    WorldSkills Mobile Robotics Collection Shanghai 2022

    #70201
    $3942,25 $3888,04
    (En stock)

    The WorldSkills Mobile Robotics Collection – Shanghai 2022 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Featuring the Studica VMX Robotics Controller for WorldSkills, the Titan Quad Motor Controller and Servo Power Block. This comprehensive Collection also includes electronics, accessories, motors, servos, mounts, U-Channel, mounting plates, flat brackets, irregular brackets, and flat beams. You'll also find gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. Includes Everything You Need (Over 1500 components).

    Download brochure and BOM

    Earthquake Shaker Table

    #80002
    $284,29 $280,28

    The Studica Robotics Earthquake Shaker Table is used in the STEM classroom to simulate the shaking of structures.  For use with data acquisition devices such as the NI myDAQ or other similar instruments.

    SR Drone TS7

    #90100
    $149,00
    (En stock)

    The SR Drone TS7 is an educational mini drone for beginners that teaches flight principles and obstacle avoidance. It is equipped with intuitive controls that allow you to easily fly anytime and anywhere. It also includes an integrated 720p camera, enabling you to use your cell phone to record impressive aerial photos and videos. But it’s not just a drone; it's a powerful educational tool. Featuring a Scratch programming app for Android or iOS, students can learn the basics of programming while having fun. Let their imaginations soar as they create and program various flight patterns and maneuvers.

    SR-Hover Self Balancing Robot

    #73002
    $169,00
    ( 25 En stock)

    The SR-Hover Self Balancing Robot from Studica Robotics is a pre-assembled, programmable WiFi robot ideal for teaching PID (Proportional–Integral–Derivative) controller skills. It includes a STM32 MCU with a Stepper Motor Driver Board, and Proportional–Integral–Derivative controller (PID).  With its built-in wifi-camera, it can be controlled using iOS/Android apps and with a PC through coding. This robot teaches more advanced robotics with an accelerometer and vision. The SR-Hover is recommended for high school and college level robotics and controls programs.

     

    6mm D-Shaft Clamping Hub

    #76281
    $3,03 $11,10
    ( 1450 En stock)

    Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels 

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File 

    Expansion Hub Encoder Cable

    #70197
    $5,25

    This is the cable designed for the encoder that is pre-attached to the NeveRest Series of motors and gearmotors. It has a connector on the opposite end to directly interface with the REV Expansion Hub or the REV Control Hub.

     

    2019 Update:

    The 'a' version of this cable as the encoder channels swapped so that the encoder counts in the same direction as the output shaft spins. This simplifies the usage of the encoder with the various programming languages for FTC!

    Specifications

    • Length: 20 in.