toutes catégories

    Falcon Sport Gearbox 36:1 HD

    The Falcon Sport is a competition tested high-performance line of planetary gearboxes from AndyMark and BaneBots. The Falcon Sport features the same high quality and feature set you've come to expect from the Sport line of gearboxes.

    Why It's The Best:

    The cold-formed steel gears inside this gearbox are a 0.7 Module tooth profile which is 40% larger than the vast majority of planetary gearbox gears previously used on competition robots. The gears are larger, but the housing's size has been optimized to reduce any unnecessary volume. This means you get more reliability without sacrificing precious space. This housing is also one solid piece of aluminum, ensuring that there is no possibility for misalignment of the stages during assembly or during the rigors of match play.

    Three-stage and two-stage versions of these gearboxes also feature an HD stage, with gears approximately double the face width of the other stages as well as a strengthened carrier plate. These larger gears on the output stage ensure that it will handle heavy or cantilevered loads without worry. The carrier plates are made of hardened 4140 Steel and interface to the output shaft with a robust hex bore. New for 2019 we are opening up the use of every available gear ratio with every available motor input meaning there are some combinations that could theoretically exceed the gearboxes design characteristics. As such, the blanket warranty we offered on these gearboxes in the past will be discontinued for future purchases. Rest assured that AndyMark still stands behind our product 100% and if you feel that there is a problem with your gearbox or any of our products please contact us and we will make it right. To help you decide which gearboxes to use for your application please reference the below table which includes the maximum torque that the gearbox is designed to take before it will fail.

    A free packet of red tacky grease (am-2768) is included with every gearbox purchased. This grease must be used to coat every internal surface of the gearbox before use.

    The Falcon Sport is designed to mate to a Falcon 500 motor with the Short Shaft already installed into it. The gearbox includes all mounting hardware for attaching a Falcon 500 motor including, the pinion gear, which is designed to "free float" on the shaft. The design of this gearbox does not need (or allow for) the Falcon shaft-end screw. 

    Mounting Features:

    • Four 10-32 0.25 in. deep tapped holes on a 1/2 in. by 1 in. or 1 in. square grid, on two opposite faces

    Output Shaft Geometry:

    • 0.5 in. Hex Profile
    • 1.0 in. Length



    If there is no table above this line please email [email protected]



    • Free Speed (RPM): 1590, 530, 395, 315, 175, 130, 95, 75, 60
    • Motor Input: Falcon
    • Motor Quantity: 1
    • Rated Torque (ft-lbs): 110, 120, 135, 140, 160, 170
    • Ratio: 4:1, 12:1, 16:1, 20:1, 36:1, 48:1, 64:1, 80:1, 100:1
    • Stall Torque (ft-lbs): 13.8, 41.5, 55.3, 69.2, 124.5, 166.0, 221.4, 276.7, 345.9


    CAD File(s)

    am-4183_0XX 1 Stage Falcon Sport With Motor.STEP

    am-4183_0XX 2 Stage Falcon Sport With Motor.STEP

    am-4184_0XX 2 Stage HD Falcon Sport With Motor.STEP

    am-4184_XXX 3 Stage HD Falcon Sport With Motor.STEP

    Layout Print(s)

    am-4183 am-4184 Falcon Sport Series Layout.PDF

    # Pièce: am-4184_036
    Disponibilité: Rupture de stock - en rupture de stock et sera expédié une fois en stock.
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    3/8" id bearing, shielded (R6ZZ)

    (En stock)



    • Flange: Unflanged
    • Inside Diameter: 0.375 in.
    • Outside Diameter: 0.875 in.
    • Overall Thickness: 0.281 in.
    • Seal Type: Shielded
    • Style: Radial
    • Weight: 0.03 lbs
    • Width: 0.281 in.



    Layout Print(s)

    am-0516 0375IN ID bearing, shielded (R6ZZ) REV2.PDF

    CAD File(s)

    am-0516 0.375'' id bearing, shielded (R6ZZ).STEP

    1/4 in. ID 5/8 in. OD Shielded Bearing (R4ZZ)

    (0 En stock)

    This is a 1/4 in. round bore bearing that is unflanged. The Shielded Ball Bearing is a great way to make things spin fast!

    1/4 in. ID 5/8 in. OD Shielded Flanged Bearing (FR4ZZ)

    (0 En stock)

    This is a 1/4 in. round bore bearing that is flanged. The Shielded Ball Bearing is a great way to make things spin fast!

    3/8 inch id Flanged, Shielded Ball Bearing (FR6ZZ)

    (En stock)

    3/8" id shielded, flanged ball bearing 


    • Inside Diameter: 0.375 inch
    • Outside Diameter: 0.875 inch
    • Flange Thickness: 0.062 inch
    • Overall Thickness: 0.280 inch
    • Weight: 0.026 pounds
    • Material: Steel

    0.252 in. ID 0.625 in. OD 2.750 in. Long Nylon Spacer

    (0 En stock)


    • Bore: 0.252 in. [6.4 mm] Round
    • Inside Diameter: 0.252 in. [6.4 mm]
    • Length: 2.750 in. [69.9 mm] (2-3/4)
    • Material: Nylon
    • Outside Diameter: 0.625 in.

    0.850 inch long, 0.75 od, 0.380 id, Spacer

    (19 En stock)

    0.75" x 0.85", nylon, 0.75" od, 0.38" id, 0.85" thick, white


    • Material: White Nylon Plastic
    • Inside Diameter: 0.38 inch
    • Outside Diameter: 0.75 inch
    • Thickness: 0.85 inch
    • Weight: 0.0014 pounds