Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Forfaits et packs

    ZA6 INDUSTRIAL ROBOT  -  EASY TO LEARN  -  EASY TO USE.

     

    6KG PAYLOAD, 6-AXIS INDUSTRIAL ROBOT

     

    The ZA6 Robot is a 6kg payload industrial robot arm that affords a wide (900mm) range of motion.
    Its industrial aluminum castings, harmonic gear drives, servo motors, and EtherCAT fieldbus give it performance similar to other industrial robots,
    including a repeatability of ± 0.020 in (0.5 mm), at a fraction of the price.

    Voir comme Grille Lister
    Trier par
    Affichage par page

    PathPilot Controller

    #51718
    Demander un devis

    Control computer for all ECM 1.4- 1.5 controlled machines

    Passive Probe Kit

    #32309
    Demander un devis

    The Passive Probe Kit is an economical probe that quickly and automatically sets work offsets using PathPilot’s integrated probing routines.

    Tormach ZA6 Robot

    #39431
    Demander un devis

    The ZA6 Robot is the ideal blend of automation and educational training. It affords a cost-effective solution to providing hands-on evidence, not just concepts.

     

    Parallel Jaw Gripper Kit

    #39432
    Demander un devis

    Set of two parallel jaw grippers mounted on pivot plate, includes control solenoids, mounting hardware, tools, screws, barrel connector, and tubing.

    Light Curtain Safety Device - Short

    #51173
    Demander un devis

    The ZA6 robot requires the presence of a safety input to function. The 51173 light curtain sender/receiver pair comes with mounting hardware and is pre-wired with an M12 connector for use with the ZA6’s safety input.

     

    • Dimension: 1.43 in. x 1.18 in. x 13.23 in. (36.5 mm x 30 mm x 33 mm
    • Working distance between transmitter and receiver: .79 in. - 118.11 in. (20 mm - 3000 mm.)
    • Detection resolution (minimum detected size): .98 in. (25 mm)
    • Response time: 10ms – 65ms
    • Enclosure rating: IP65

    Hold to Run Switch

    #51213
    $575,00

    Hold to run switch (also known as a “dead man’s” switch) with 4m cable and M12 connector for use with ZA6 robot.

     

    The switch has dual action – when depressed half-way it allows the robot to be jogged at 10% of maximum velocity. When released or pressed all the way in it engages the robots safety circuit, stopping all motion and removing motor power.

    Proximity Sensor

    #51068
    Demander un devis

    Proximity sensor pre-wired with M12 connector for use with ZA6 robot digital inputs.

    Vacuum Sponge Cup Gripper

    #51357
    Demander un devis

    Sponge vacuum cup with integrated Venturi vacuum generator for ZA6 robot