Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Generic 9 mm Wide 5 mm Pitch HTD Timing Belt 150 Tooth

    These are all of our 9 mm wide 5 mm pitch HTD synchronous timing belt offerings. All of these belts are a composite of flexible rubber with a fiberglass tensile member throughout. Synchronous timing belts, also known as a toothed belt or synchronous belt, are designed to eliminate slippage and keep any number of objects rotating at a constant rate. We offer both genuine Gates brand belts as well as lower-cost generic brand belts. 

     

      # Pièce: am-4911
      $19,00
      18 en stock

      Current Belt Offerings

      Parts are organized by the following scheme: (Tooth Count - Trade Number - AndyMark part number)

      Gates Brand Belts

      • 48T - 240-5M-09 - am-3274
      • 60T - 300-5M-09 - am-4659

      Generic Brand Belts

      • 40T - 200-5M-09 - am-3272
      • 45T - 225-5M-09 - am-3273
      • 48T - 240-5M-09 - am-3662
      • 70T - 350-5M-09 - am-4359
      • 93T - 465-5M-09 - am-3378
      • 105T - 525-5M-09 - am-3850
      Écrivez votre propre commentaire
      • Le produit peut être examinée que après l'achat
      • Seul les utilisateurs enregistrés peuvent écrire une critique
      *
      *
      • Mal
      • Excellent

      Current Belt Offerings

      Parts are organized by the following scheme: (Tooth Count - Trade Number - AndyMark part number)

      Gates Brand Belts

      • 48T - 240-5M-09 - am-3274
      • 60T - 300-5M-09 - am-4659

      Generic Brand Belts

      • 40T - 200-5M-09 - am-3272
      • 45T - 225-5M-09 - am-3273
      • 48T - 240-5M-09 - am-3662
      • 70T - 350-5M-09 - am-4359
      • 93T - 465-5M-09 - am-3378
      • 105T - 525-5M-09 - am-3850
      Les clients ayant acheté cet article ont également acheté

      2" Compliant Wheel, 1/2 inch Hex, 35 Durometer Green

      #am-3462_green
      $8,00 $10,42
      ( 60 En stock)

      Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

       

      The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

       

      Compliant Wheel Sizing

       

      Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

       

       

      Specifications

       

      • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
      • Diameter: 2 in.
      • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
      • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
      • Material: TPU
      • Maximum RPM: 6000 - 9000
      • Weight: 0.035 lb.
      • Width: 0.5 in.

       

      Documents

      Layout Print(s)

      am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

      am-3462 2IN 500Hex Compliant Wheel REV3.PDF

      am-3572 2IN 8mm Compliant Wheel REV4.PDF

      CAD File(s)

      am-3571 2IN 375Hex Compliant Wheel REV2.STEP

      am-3572 2IN 8mm Compliant Wheel REV2.STEP

      am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

      Additional File(s)

      2 inch Compliant Wheel Expansion.pdf

      Don't see what you need?

      1/4-20 Nylock Nut

      #am-1015
      $0,11 $0,12
      ( 500 En stock)

      Specifications:

      • Material: Steel
      • Coating: Zinc plated
      • Thread: 1/4-20
      • Width across hex: 7/16"

      1/4-20 x 0.5" BHCS - Min 25

      #am-1039
      $0,50 $0,53
      ( 800 En stock)

      Specifications:

      • Material: Steel
      • Coating: Zinc plated
      • Thread: 1/4-20
      • Length: 1/2"
      • Head: Button Head Cap Screw

      10-32 Nylock Jam Nut

      #am-1063
      $0,11 $0,11
      ( 325 En stock)

      Must be ordered in mulitples of 25

       

        #10-32 x 1.5" SHCS - Min 25

        #am-1014
        $0,38 $0,43
        (En stock)

        Statistics:

        • Material: Steel
        • Coating: Zinc plated
        • Thread: #10-32
        • Length: 1-1/2 inch
        • Head: Socket Head Cap Screw

        10-32 x 0.375 in. Socket Head Cap Screw

        #am-1359
        $0,30
        ( 250 En stock)

        This item can only be purchased in multiples of 25

         

        Specifications

        • Drive: 5/32 in. Hex
        • Finish: Zinc
        • Head: Socket Cap
        • Length: 0.375 in.
        • Material: Alloy Steel
        • Thread: 10-32 Fine
        • Weight: 0.005 lbs

        Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

        #am-2986
        $9,00 $10,42
        ( 189 En stock)

        This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

        This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


        Specifications:

        • Inside diameter: 0.500-0.502 inch hex bore
        • Outside diameter: 1.125 inch
        • Flange thickness: 0.062 inch
        • Overall thickness: 0.312 inch
        • Weight: 0.05 pound

        WAGO 221 Series InLine Splicing Connector with Lever

        #am-4728
        $1,00
        ( 978 En stock)

        This is a quick and reliable compact connector for flexible conductors. Splicing has never been easier. Lift the orange lever, and insert the conductor, close the lever. The lever clicks as it is lowered, actuating the CAGE CLAMP®, for superior connectivity. This tool-free connection and disconnection makes the connection simple to create and alter in the future.