Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    GT2 Timing Belt, 2mm Pitch, 6mm width, 330mm Closed, (2 pack)

    This GT2 (also called 2GT) timing belt has a 2mm Pitch and 6mm width

    Specifications:

    • type: GT2 closed-loop 330mm 
    • pitch: 2 mm
    • width: 6 mm
    • material: neoprene rubber, fiberglass reinforced
    • belt shape: circular tooth profile
    # Pièce: 76461-2
    $11.10
    Disponibilité: 300 en stock
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    20 Tooth GT2-6mm Timing Belt Pulley

    #76450
    $11.10
    (1622 En stock)

    The 20 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts. 

    Specifications:

    • 20 Tooth Timing Pulley
    • 6mm Bore 
    • Material: 6061 T6 Aluminum
    • Step File

    48mm Square Beam

    #76108
    $3.46
    (492 En stock)

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 48mm
    • Step File

     

    40 Tooth GT2-6mm Timing Belt Pulley

    #76452
    $13.88
    (465 En stock)

    The 40 Tooth GT2-6mm Timing Belt Pulley can be used with any of the GT2 belts. 

    Specifications:

    • 40 Tooth Timing Pulley
    • 6mm Bore 
    • Material: 6061 T6 Aluminum
    • Step File

    Multi-Mode Smart Servo

    #75002
    $33.32
    (2211 En stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:                 20kg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    D Shaft 6mm x 432mm (2 pack)

    #76162-2
    $10.42
    (1291 En stock)

    The 6mm diameter D -Shaft is made of stainless steel and is used throughout our building system as drive components. The D-Shaft profile is used with pulleys, gears and hubs when tightening the set screws and creating a non-slip connection.

    Specifcation:

    • Stainless Steel
    • 432mm length
    • 6mm OD
    • 5.5mm to flat
    • Step File

     

    Chain 1.5 Links #25

    #am-4182_25
    $3.00
    (107 En stock)

    Do you need an odd number of chain links? Tired of dealing with cotter pins in old school "half links"?  Love using the DarkSoul or ARC chain tool for everything? These are the links for you!

     

    These links add one and a half links to a run of chain making for easier cleaner alternative to half links. Use a chain splicing tool or two master links to install them. No more lost matches from a failed half link!

     

    Specifications

    • Chain Size: #25, #35
    • Material: Steel
    • Pitch: 0.25 in., 0.375 in.
    • Style: Roller Chain