Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Kits de compétition

    Capteurs
    Voir comme Grille Lister
    Trier par
    Affichage par page

    360 Degree LiDAR

    #70500
    $139,44 $137,52
    ( 347 En stock)

    The Studica 360 Degree LiDAR is a 2D LiDAR that rotates 360 degrees to achieve high accuracy, stable performance, high-frequency and high-precision distance measurement. It's ideal for robot navigation and obstacle avoidance.
     

    Lidar Step File  
    Lidar Control Unit Step File  

     

    Performance

    • Range 0.12 … 8m
    • Relative Error 3.5% 1m ≤ Range ≤ 6m

    Connections

    • Power supply voltage 4.5 V … 5.5 V
    • Power supply current 300 mA (typical)
    • Power supply start-up peak current 1000 mA

    Communication Interface

    • UART
    • USB-C (USB2.0)

    Mechanical

    • Dimensions 53 mm x 44 mm x 37 mm
    • Weight 126g (excluding cables)

    Optical

    • Laser safety Class 1
    • Laser Wavelength 775 - 800 nm

    Environmental

    • Operating temperature 0 ... +40°C
    • Storage temperature -10 ... +60°C
    • Lighting Environment 0 ... 2000 Lux

    Accessories

    • USB Type A to USB-C cable
    • USB Type A to Micro-B cable

    Default settings

    • Serial port settings 115200 baud, 8 data bits, 1 stop bit, no parity, no handshaking

    ____________________________________________________________________________________________________________

     

    Using the LiDAR with the VMX:

         For Java and C++, the required version numbers are:

      • GradleRIO: 2020.3.2.30
      • Studica.json: 1.1.28

         To update GradleRIO:

      • Select the VMX-PI extension in VS Code
      • Choose update WPILib Version
      • The new version will now be downloaded and cached to the project

         To update Studica.json

      • Select the WPILib extension in VS Code
      • Search for Mange Vendor Libraries
      • Select: Check for updates (Online)
      • There should be a checkbox for V 1.1.28 of the Studica.json
      • The new libraries should download and cache to the project

         Sample code for how to use the lidar to our examples repo on Github: https://github.com/studica/WorldSkills-Example-Projects/tree/main/Lidar%20Test%20Code.

    IR Range Sensor Bracket

    #40118
    $8,44 $8,32
    ( 455 En stock)

    Use this bracket to secure the IR Range Sensor to the Studica structure.

     

     

    Short Lever Limit Switch with Terminals (4 pack)

    #72060
    $14,07 $13,88
    ( 922 En stock)

    This is a snap-action micro switch with hinged roller lever and terminals for easy wire connection.

     

    Features:

    • High precision of action seat
    • High shock resistance
    • Shock resistance Max.l000/s2
    • Max temperature: T105.C
    • Catheter design for easy wiring 
    • 3 Pin
    • Max. Current: 16A
    • Max. Voltage: 250V
    • OP:14.3~15.1mm
    • Protection Level: IP40
    • Switch Function: ON - (OFF), OFF - (ON)
    • Contact form: SPDT
    • High impact resisstance
    • Max Ambient temperature:105centigrade
    • Mechanical life:10,000,000 on -off
    • Electrical life: over 100,000 on-off
    • Contact material: AgNi ,AgCdO
    • Certificate: CCC,CE,UL,ROHS
    • Step File

     

    IR Range Sensor (10 cm to 80 cm)

    #40117
    $16,89 $16,66
    ( 1868 En stock)

    The Sharp IR Distance Sensor GP2Y0A21YK0F uses a beam of infrared light to reflect off an object to measure its distance. Because it uses triangulation of the beam of light to calculate the distance, it is able to provide consistent and reliable readings which are less sensitive to temperature variation or the object’s reflectivity. The sensor outputs an analog voltage corresponding to the distance of the object, and can easily be read using an inexpensive analog to digital converter (ADC) chip.

    Ultrasonic Distance Sensor Bracket

    #40238
    $8,44 $8,32
    ( 1679 En stock)

    The Ultrasonic Distance Sensor Bracket is used to secure the Ultrasonic Distance Sensor to the Studica channel.

    Tetrix Max Ultrasonic Sensor Pack

    #43055
    $58,57 $50,59

    This pack contains a noncontact distance measurement module that works at 42 kHz to transmit a digital signal to the TETRIX PRIZM Robotics Controller. The module detects the range of an object within 3 to 400 cm, enabling your robot to sense its surroundings. Comes with a mount, connecting sensor cable, and the hardware for attaching the sensor to the TETRIX hole pattern

    Tetrix Max Line Finder Sensor Pack

    #43056
    $23,13 $19,98

    This pack contains a line-tracker module that transmits a digital signal to the TETRIX PRIZM Robotics Controller, enabling a robot to follow a black line on a white background or vice versa. The sensor consists of two parts: an IR-emitting LED and an IR-sensitive phototransistor. Comes with a mount, connecting sensor cable, and the hardware needed for attaching the sensor to the TETRIX hole pattern.

    Tetrix Max Ultrasonic Sensor Mount

    #43077
    $7,07

    Offers a replacement for a lost or damaged Ultrasonic Sensor Mount.

    Cobra Line Follower Sensor

    #70151
    $14,07 $13,88
    ( 742 En stock)

    The Cobra Line Follower Array provides 4 X QRE1113 IR reflectance sensor mounted on a 9mm pitch Each sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate.

     

    The Studica Line Sensor Board consists of 4 IR LED/phototransistor pairs, making it a great detector for a line-following robot.  The Line Sensor Board allows the robot to tell objects or surfaces apart based on how dark or light they are. It shines a beam of infrared light out onto the object, and measures how much light is reflected back.

    Each sensor provides a separate analog voltage output. The sensor board is an infrared emitter/receiver that is able to differentiate between a dark surface (with low IR reflectivity – 3.3V to 5V) and a light surface (with high IR reflectivity – 0V to 0.5V). However, this range can vary depended on the installed height of the sensor board. 

    The optimum height distance is 3-5 mm; however, the reflectivity values will change depending on distance. A daylight filter is built into the sensor.

    • 5VDC operating voltage (recommended)
    • 70mA supply current
    • Optimal sensing distance: 0.125" (3mm)
    • Step File

    Ultrasonic Distance Sensor

    #70753
    $25,34 $24,99
    ( 827 En stock)
    • Stable, accurate distance measurement
    • High precision, blind spots (3cm) super close
    • A full set of ranging process
    • Step File 

    MD2 Motor Driver & Sensor Adapter for NI myRIO

    #71010
    $266,20 $262,54
    ( 473 En stock)

    The MXP-MD2 is a next-generation high performance Motor Controller Driver and Sensor Adapter with many added features to make it ready to use in your robot project. The included VNH5019ATR-E Motor Controller ICs are very robust with high current output and several important protection features. Many other I/O options have been incorporated into this design to make it extremely easy to interface to several different sensors.

    Features,

    • Includes 2 VNH5019 Motor Controller ICs,
      • 2 Enable Inputs, 2 direction inputs, one PWM input per channel up to 20Khz
      • Up to 12A Continuous output per channel, 30A peak current short ms duration
      • Under-voltage, over-voltage, reverse-voltage protection
      • Thermal Shutdown protection
      • Current Limit protection
      • Current Sense Output Proportional to Motor Current (approx. 140 mV/A)
      • Loss of Ground and Loss of Vcc Protection
      • Protection against short to Ground and short to Vcc

    Specifications,

    • 3V-compatible inputs
    • Directly interfaces with myRIO MXP Port
    • 8-16V DC Battery Input Terminal, J7, (GND, MTRS+ PWR)
    • Jumper Selectable Current sense feedback from the VNH5019 Motor ICs, J12, J17
    • Reverse Power LED Indicator
    • FWD and REV Motor Direction LED Indicators
    • 3 Servo Headers, J9, J10, J11, (SIG, SVDC, GND)
    • 1 Parallax Ping Sensor Port, J13, (GND, VCC, DIO)
    • 1 Sharp IR Port, J21, (AI0, VCC, GND)
    • 1 LSB Port, J18, (VCC AI0, AI1, AI2, AI3, GND)
    • 1 NavX Port, J19, (VCC, SDA, SCL, GND)
    • 2 Encoder Ports, J22, J23, (VCC, ENCB, GND, ENCA)
    • 1 I2C Port, J20, (NC, SCL, SDA)
    • Built in 5V 3A voltage Regulator
    • 3.3V Power Rail Header, J3, from myRIO
    • 5V Power Rail Header, J4, from onboard regulator
    • GND Rail Header, J6
    • Separate Servo Power Input, J8 (SV+ PWR, GND)

    Case for navX2-Micro

    #71039-C
    $9,00 $9,83
    (En stock)

    Keep that swarf out of your delicate electronics! Protect your navX-Micro and navX2-Micro from debris and impacts with this simple case.

    Sensor Screen

    #am-3212
    $106,09 $119,81
    ( 1 En stock)

    Whether in the shop or in the field, when you need to check sensor functionality the Sensor Screen will help. This self-contained device will let you plug in robot sensors and view their readouts separate from your robot, providing crucial troubleshooting information. Future sensors can be added through an SD card, protecting your Sensor Screen against obsolescence.

    Check out our Github page and Subscribe to be notified about software updates. Is there a sensor that you think should be in this? Send an email to [email protected] with your suggestions. 

    Features: 

    • Updatable with an SD card
      • Firmware updates in the future to add sensors
    • Data can be seen in a voltage or ADC mode (0-1023)
    • USB Serial Data Output:
      • Format: Menu Number, Timestamp, Sensor Data (ADC)
    • Mulitcolor LED
      • Provides sensor feedback
    • Powered by 9v for mobility
    • Comes with:
      • 1 - Sensor Screen
      • 1 - 3D Printed Sensor Screen Case

    Tested Sensors:

    • Current Sensor (am-2709)
    • Precision Potentiometer (am-2619)
    • Absolute Encoder with Cable (am-2899)
    • Dart Hall Effect Sensor (am-3313)
    • CIMcoder (am-3314)
    • E4T OEM Miniature Optical Encoder Kit (am-3132)
    • Ultrasonic proximity sensor, EZ, MB1013, MaxBotix (am-2434)
    • All sensors in the Sensor6PAK (am-3220)
    • NeveRest Encoders
    • PG Encoders
    • Reads PWM
    • RPM
    • Dimmable Flashlight

    Studica ULTRASOUND sensor 3.3V

    #ROB00128
    $9,22

    Connect red and green wire to 3.3V power output, Blue and black wire to input P3 and P0. Need to add package \"SONAR\".

    MonkMakes CO2 Sensor for micro:bit

    #SKU0072
    $122,94

    This board, designed for use with the Lets Talk Science Living Space Project, provides a CO2, temperature and Relative Humidity measurements to a BBC micro:bit.