The Bumper Wood Corner Bracket is designed to connect two plywood planks together to form a strong 90 degree bumper corner.

Specifications

• Material: 5052 Aluminum

Documents

Layout Print(s)

am-3233 AM14U3 Bumper Outside Corner Bracket.PDF

CAD File(s)

am-3233 AM14U3 Bumper Corner Bracket.STEP

BLUE Cordura nylon bumper material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is heavy-duty nylon cloth, much like the material used on backpacks.

Additional Information:
 

We also have stick-on numbers available (not included with material).

Specifications

• Color: Blue
• Denier: 1000
• Length: 161 in.
• Material: Nylon
• Width: 19.5 in.

This bumper kit was originally designed to fit the AndyMark C-Base Chassis but will work on most extrusion based custom frames. 

Plywood is not being shipped with the bumper kit.

Included Hardware:

• Six - Pool Noodle, Qty. 6, 55" x 2.5" (am-0838)
• One - 161" x 19.5" Blue Material Piece
• Sixteen - Bumper Mount Bracket, aluminum
• Thirty-Two - #10-32 Tee Nut
• Thirty-Two - #10-32 x 1" Socket Cap Screw
• Eight - 1/4-20 x 2" Socket Cap Screw
• Eight - 1/4-20 Nylock Nut

Additional Information: 
We also have stick-on numbers available (not included with material).

This bumper kit was originally designed to fit the AndyMark C-Base Chassis but will work on most extrusion based custom frames. 

Plywood is not being shipped with the bumper ki

 

Included Hardware:

• Six - Pool Noodle, Qty. 6, 55" x 2.5" (am-0838)
• One - 161" x 19.5" Red Material Piece
• Sixteen - Bumper Mount Bracket, aluminum
• Thirty-Two - #10-32 Tee Nut
• Thirty-Two - #10-32 x 1" Socket Cap Screw
• Eight - 1/4-20 x 2" Socket Cap Screw
• Eight - 1/4-20 Nylock Nut

Additional Information: 
We also have stick-on numbers available (not included with material).

The Left Triangle Bracket was originally designed for the AM14U2, AM14U3 and AM14U4 chassis as a robust backing for mounting bumpers. It's also perfect for making robust 90 degree connections between two robot frame sections.

Documents

Layout Print(s)

am-3210L Left Triangle Bracket REV2.PDF

CAD File(s)

am-3210L Left Bumper Triangle Bracket AM14U3.STEP

The Left Triangle Bracket was originally designed for the AM14U2, AM14U3 and AM14U4 chassis as a robust backing for mounting bumpers. It's also perfect for making robust 90 degree connections between two robot frame sections.

Documents

Layout Print(s)

am-3210R Right Triangle Bracket REV2.PDF

CAD File(s)

am-3210R Right Bumper Triangle Bracket AM14U3.STEP

This bracket is designed to attach bumpers to the AM14U3 in the 2018 FIRST Robotics Competition season. 

Specifications:

• Material: 5052 Aluminum
• Weight: 0.084 Pounds
• Overall Height: 1.64 in.
• Material Thickness: 0.125 in.

This bracket is designed to attach bumpers to the AM14U3 in the 2018 FIRST Robotics Competition season. 

Specifications:

• Material: 5052 Aluminum
• Weight: 0.126 Pounds
• Overall Height: 1.0 in.
• Material Thickness: 0.125 in.

This bumper hardware kit is designed to fit the AndyMark C-Base Chassis but will fit most custom chassis. It does not include any fabric, pool noodles, or plywood. This is the same hardware that is included in the Red or Blue Bumper Kits.

Included Hardware:

• Sixteen - Bumper Mount Bracket, aluminum
• Thirty-Two - #10-32 Tee Nut
• Thirty-Two - #10-32 x 1" Socket Cap Screw
• Eight - 1/4-20 x 2" Socket Cap Screw
• Eight - 1/4-20 Nylock Nut (am-1015)

This is a box of 32 pool noodles. These may be used to build bumpers for FIRST Robotics Competition robots. Be sure to read robot rules. If one of these items is ordered, 32 noodles will be shipped to the purchaser, within one box.

Specifications

• Color: random between purple, blue, red, yellow, orange (choice of color not available)
• Diameter: Approximately 2.2 to 2.5 in.
• Length: 54 to 57 in.
• Weight: 8.020 lbs

These may be used to build bumpers for FIRST Robotics Competition robots. Be sure to read robot rules. 

Specifications:

• Length: 54 to 57 inches
• Measured Diameter: Approximately 2.3 to 2.5 inches
• Weight : 0.152 pounds each
• Color: random between purple, blue, red, yellow, orange (choice of color not available)
• These noodles are often used in these applications:
  • Robot bumpers
  • Flexible swords during frustration-releasing occasions

RED Cordura nylon bumper fabric material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is heavy-duty nylon cloth, much like the material used on backpacks.

 

Additional Information:
 

We also have stick-on numbers available (not included with the material).

Specifications

• Color: Red
• Denier: 1000
• Length: 161 in.
• Material: Nylon
• Width: 19.5 in.

Slick, blue nylon bumper material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is 200 denier nylon oxford cloth. This material is slick in comparison to other bumper material like am-2676. This may be useful in situations when you want objects or elements to slide on your robot bumper rather than grip to it.

Slick, red nylon bumper material. Each piece is 161 x 19.5 inches, enough to cover the entire perimeter of your FRC robot. The material is 200 denier nylon oxford cloth. This material is slick in comparison to other bumper material, am-2675. This may be useful in situations when you want objects or elements to slide on your robot bumper rather than grip to it.

The purpose of this item is to mount to the back side of a plywood board within the AndyMark Blue bumper Kit or Red bumper Kit 

Specifications:

• Material: 5052 Aluminum
• Thickness: 0.093"
• Weight: 0.02 Lb
• Finish: Tumbled

This is a package of FOUR stick-on numbers, designed to be adhered to robot bumper material.

Specifications:

• Quantity: 4
• Material: White stick-on plastic
• Height: 4 inches
• Width: 2.6 inches
• Line width: 0.8 inch
• Weight: 0.004 pounds

Usage (for best application):

• Apply heat to cloth area using a heat gun or hairdryer for 30 seconds (prior to placing number). Do not put heat on or near pool noodles, as they will shrink.
• Place numbers in position on bumper material as desired with pressure.
• Apply heat to numbers using a heat gun or hairdryer for 30 seconds.
• Place under a static load for 5 minutes.