M3 x 25mm Socket Head Cap Screw (pack of 100), Zinc Plated.
Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels
Specifcation:
Φ29.0mm*16.0mm thick6*M3 thread tapping through(including 2*M3 thread for M3 SHCS)Φ6.0mm D holeAL6061-T6
The Servo Horn 25T is made of anodized 6061-T6 Aluminum and is used with the Multi-Mode Smart Servo (75002) and the Studica building structure.
Take your TETRIX robots to the next level with a stronger 12-volt DC motor with 100 rpm and 700 oz-in. of torque. The motor features a built-in, high-resolution Hall effect encoder for precise motor control. Based on user feedback and created specifically to withstand the stress of intense robotics competitions, this is our strongest TETRIX motor yet. TorqueNADO is compatible with allTetrix Max; DC Motor Mounts.
Specs:
These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.
The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.
Programming the Smart Servo using the Smart Servo Programmer
CAD File
TETRIX MAX Motor Mount Pack attaches the DC Drive Motor to your robot. Includes the Motor Mount, two kep nuts, and two cap screws.
TETRIX MAX Motor Shaft Hubs attaches wheels and gears to motor shafts. Each hub comes with a screw and is made of heavy-duty aluminum.
Made from delrin in blue, this M3 Screw Spacer has a 3.2mm ID x 5.5mm OD x 1mm thick. Use it for any M3 screw.
Made from delrin in blue, this M3 Screw Spacer has a 3.2mm ID x 5.5mm OD x 5mm thick. Use it for any M3 screw.
M3 x 8mm Socket Head Cap Screw (pack of 100), Zinc Plated.
M3 x 10mm Socket Head Cap Screw (pack of 100), Zinc Plated.
M3 x 12mm Socket Head Cap Screw (pack of 100), Zinc Plated.
M3 x 10mm Button Head Cap Screw (pack of 50), Zinc Plated.
M3 x 30mm Socket Head Cap Screw (pack of 50), Zinc Plated.
M3 x 20mm Socket Head Cap Screw (pack of 50), Zinc Plated.
The M3 x 10mm Low Profile Screw with Kep Nut is a 304 Stainless Steel m3 Din 7991 Countersunk Hex Socket Flat Head Screw with a matching Kep Nut. This package is made for the Slide Rail, 288mm Length, 180mm Stroke and the Slide Rail, 384mm Length, 240mm Stroke
Includes,