Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Monk Makes

     

    Monk Makes is known for its useful electronic kits and modules. Many of their electronics and sensors are compatible with Raspberry Pi and Arduino boards, making their products ideal for many schools.

    Voir comme Grille Lister
    Trier par
    Affichage par page

    Electronics Starter Kit for Raspberry Pi

    #SKU0002
    $12.30

    The Raspberry Pi Electronic Starter Kit contains all the components needed, together with easy to follow instruction cards, in order to complete 10 simple experiments involving LEDs, thermistors, photoresistors and switches and is an ideal starting point for anyone new to electronics and the Raspberry Pi.

    Electronic Starter Kit for BeagleBone Black

    #SKU00043
    $17.85
    This kit will get you started with a whole load of the projects and experiments.
    • Solderless electronic experiment kit
    • Accompanies the book Programming BeagleBone Black (Beagle Bone and Book NOT included)
    • High quality 400 point Breadboard
    • A Good Range of Interesting Components to get you started

     

    Squid Twin Pack

    #SKU00044
    $8.55

    Pack of two Raspberry Squids A bright RGB (Red, Green, Blue) LED with builtin resistors and female header leads that can just plug directly onto the GPIO pins of a Raspberry Pi. This product includes a Raspberry Leaf GPIO Identification template.

    Squid Individual

    #SKU00044B
    $3.69

    A bright RGB (Red, Green, Blue) LED with builtin resistors and female header leads that can just plug directly onto the GPIO pins of a Raspberry Pi.

    Please note individual Squids are packaged in a clear plastic bag.

    Squid Button Twin Pack

    #SKU00045
    $9.78

    The Squid Button LATCHING is a latching (clickon, click again off) push switch with trailing leads that end in female header sockets that will fit over GPIO pins on a Raspberry Pi, Node MCU or Particle Photon. To reduce the chance of accidental shortcircuits when using the Button, each Button has a builtin 470Ω resistor that does not affect the switching action when connected to a GPIO input, but does mean that if the switch is accidentally connected across power connections your Raspberry Pi will not come to any harm.

    Squid Button non-latching Individual

    #SKU00045B
    $3.69

    The Squid Button is a momentary action push switch with trailing leads that end in female header sockets that will fit over GPIO pins on a Raspberry Pi, Node MCU or Particle Photon. To reduce the chance of accidental shortcircuits when using the Button, each Button has a builtin 470Ω resistor that does not affect the switching action when connected to a GPIO input, but does mean that if the switch is accidentally connected across power connections your Raspberry Pi will not come to any harm.

    Squid Button LATCHING Individual

    #SKU00045C
    $3.69

    The Squid Button LATCHING is a latching (clickon, click again off) push switch with trailing leads that end in female header sockets that will fit over GPIO pins on a Raspberry Pi, Node MCU or Particle Photon. To reduce the chance of accidental shortcircuits when using the Button, each Button has a builtin 470Ω resistor that does not affect the switching action when connected to a GPIO input, but does mean that if the switch is accidentally connected across power connections your Raspberry Pi will not come to any harm.

    Squid Combo Kit

    #SKU00046
    $9.78

    The Squid Combo Pack comprises a Raspberry Squid RGB LED, two Squid buttons (nonlatching) and a Raspberry leaf to help identify the GPIO pins.

    A bright RGB (Red, Green, Blue) LED with builtin resistors and female header leads that can just plug directly onto the GPIO pins of a Raspberry Pi.

    Basic Component Kit

    #SKU00050
    $17.18
    This little box of bits from MonkMakes is a collection of the most used components from Simon Monk’s books. Unlike many basic components that give you a lot of cheap filler components that you will never use, this kit provides you with a good selection of the most useful components.

    Servo Kit for Raspberry Pi

    #SKU00051
    $15.38

    This kit includes 2 servo motors and a Monk Makes ServoSix interface board for use with Raspberry Pi.

    PUPPET KIT FOR RASPBERRY PI

    #SKU00052
    $54.70
    Use your Raspberry Pi to take control of this string puppet.

    Monk Makes Protoboard Kit

    #SKU00053
    $24.60

    Go from solderless breadboard design to a neat soldered solution that works with connectors that don’t play well with breadboard using the MonkMakes Protoboard kit.

    Monk Makes Protoboard 5 Pack

    #SKU00054
    $13.47

    After its successful KickStarter Campaign the MonkMakes Protoboard is now available to buy as a 5-pack of boards.

    Monk Makes Protoboard Component Pack

    #SKU00055
    $11.69

    This is a twin pack of side components for the MonkMakes Protoboard. It includes relays, components for a 5V power supply and connectors. Packaged in small cardboard box.

    MonkMakesDuino LCD Kit

    #SKU00056
    $30.75

    The MonkMakesDuino LCD Kit provides plenty of entertainment building projects and learning how to program and use the MonkMakesDuino Arduino compatible board.

    MonkMakesDuino (Single)

    #SKU00058
    $13.53

    This is an Arduino Uno compatible board designed for ease of use with breadboard.

    Speaker for micro:bit

    #SKU00060
    $8.55

    The MonkMakes Speaker for micro:bit is a neat little amplified speaker that connects to the micro:bit using alligator clips. Despite its small size, the speaker is pretty loud.

    Please note that the individual boards are packed in antistatic bubblewrap bags.

    Relay for micro:bit

    #SKU00061
    $8.55

    The MonkMakes Relay for micro:bit is a solidstate(no moving parts) relay that allows an output of a micro:bit to turn things
    on and off.


    This relay can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or even a string of 12V LED lighting. The voltage needs to be kept under 16V, but the relay will automatically protect itself against too much current.


    Please note that the individual boards are packed in antistatic bubblewrap bags.

    Sensor for micro:bit

    #SKU00062
    $8.55

    The MonkMakes Sensor Board for micro:bit can be used to measure sound levels, temperature and light levels.

    Please note that the individual boards are packed in antistatic bubblewrap bags.

    Electronic Starter Kit for micro:bit

    #SKU00063
    $36.84

    This kit contains everything needed to start learning about connecting electronics to the micro:bit in an accessible and easy manner. Everything is connected using the supplied alligator clips, so no soldering required. This kit suitable for children as young as 10 with some adult help.

    RGB LED for micro:bit

    #SKU00064
    $3.69

    The MonkMakes RGB LED is an LED that can be used to make any colour. Handily mounted on a PCB it connects to the micro:bit using alligator clips.

    Please note that the individual boards are packed in antistatic bubblewrap bags.

    Short Alligator Leads 10 pack

    #SKU00065
    $3.38

    Perfect for micro:bit, our leads are supplied in a bundle of 10. Two each of black, red, white, green and yellow. Each lead is 185mm (7.5 inches) long from tip to tip.

    7-segment for micro:bit

    #SKU00066
    $14.76

    The 7-segment for micro:bit is a four digit 7-segment display for micro:bit. You can use it to display numbers, but it can also display letters and other characters, albeit with the limits imposed by the 7 segments of each digit. Powered directly from micro:bit pins it can be used to send messages to the display using the micro:bit’s Serial blocks. Please note that the individual boards are packed in antistatic bubblewrap bags.

    Hacking Electronics Kit

    #SKU0007
    $34.28
    This kit of parts is designed to get you started with electronics. It is a useful general purpose starter kit.

    HACKING ELECTRONICS MEGA KIT

    #SKU00070
    $61.67

    This kit will provide you with a good set of components allowing you to make many of the projects in the book, as well as providing a great basic kit of parts to get you started on your electronics adventure.

    Servo for micro:bit

    #SKU00073
    $8.55

    Servo for micro:bit provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a
    power supply or battery pack to provide 5 or 6V to the servomotors. It includes a voltage regulator that will supply 3V back to
    the micro:bit.

    Power for micro:bit

    #SKU00074
    $8.55

    The MonkMakes Power for micro:bit opens up lots of ways of powering your micro:bit.

    The board has a standard DC barrel jack that accepts between 4.5 and 12V and provides a regulated 3V output to the micro:bit via its JST battery connector.

    Servo Kit for micro:bit

    #SKU00075
    $21.53

    The Servo Kit for micro:bit makes it easy to connect up three servomotors from your micro:bit. Not only that, but the kit also comes with three servomotors and a battery box. Just add a micro:bit and batteries and away you go!

    Amplified Speaker

    #SKU00076
    $9.78

    The MonkMakes Powered Speaker is an easy to use amplified speaker on a PCB. The board needs a 5V power supply that can be provided by a Raspberry Pi or Arduino. Audio input will normally be to the 3.5mm stereo audio jack socket, which is mixed to a mono signal as there is just a single speaker on the board.

    CHARGER KIT FOR MICRO:BIT

    #SKU00078
    $31.54
    A LiPo battery and charger board that charges automatically while you use your micro:bit! This neat solution to your micro:bit’s power needs comes with an acrylic layer enclosure to protect your micro:bit and the Charger for micro:bit.

    Animatronic Head Kit for micro:bit

    #SKU00079
    $57.55
    This kit provides everything you need (apart from a micro:bit and batteries) to make a talking animatronic head. Its eyes move and the head speaks from a MonkMakes Speaker for micro:bit.

    Breakout boards for TEA5767 - 3 pk

    #SKU0019
    $5.48
    The TEA5767 Breakout makes it possible to use TEA5767 FM radio receiver modules on breadboard. The breakout boards need you to solder your own TEA5767 module onto the board. Note that these are sold in a pack of three breakout PCBs.

    ServoSix (Board Only)

    #SKU0059
    $6.09

    The Servo Six board simplifies the process of connecting up to six servo motors to a Raspberry Pi or Arduino.

    MonkMakes CO2 Sensor for micro:bit

    #SKU0072
    $122.94

    This board, designed for use with the Lets Talk Science Living Space Project, provides a CO2, temperature and Relative Humidity measurements to a BBC micro:bit.

    Monk Makes Plant Monitor

    #00096
    $14.25

    The Monk Makes Plant Monitor board is a capacitive moisture meter with temperature and relative humidity measurement. Compatible with micro:bit, Raspberry Pi, Arduino, Pico and most microcontroller boards.