Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Moteurs

    Moteurs
    Voir comme Grille Lister
    Trier par
    Affichage par page

    2.5 inch CIM Motor

    #am-0255
    $47.00
    (En stock)

    The CIM motor is a tried and true FIRST Robotics Competition workhorse motor. This brushed DC motor is 2.5 inches in diameter and kicks out 337 watts of power.

     

    Pinion Options:

     

    The CIM motor shaft is 0.313 in. (8 mm) in diameter and 1.25 inches long. It features a 2 mm wide machine key slot allowing installation of any number of custom or off the shelf pinions such as those included with all of our CIM based gearboxes. Other options include a pre-attached 16 tooth pinion making the CIM ready to mate to a CIM Sport planetary gearbox or a pre-attached 15 tooth pinion preparing the CIM for an EVO Gearbox. Use either of these two options if you are planning on using either the CIM Sport or an EVO gearbox and don't want to install the press fit pinion yourself. All of our other CIM based gearboxes use a slip fit pinion & machine key and are easy for the end user to install. 

     

    Compatible Components:

     

    Motor Etching

    • Logo: AndyMark Logo
    • Voltage and Name: 12VDC 2.5" CIM MOTOR
    • CCL part number: PM25R-45F-1003
    • Manufacturing date: MMDDYY

     

    Specifications

    • Bolt Pattern: 2 #10-32 Holes on a 2 in. diameter bolt circle
    • Duty Cycle: Intermittent
    • Free Current: 2.7 AMPs
    • Free Speed: 5310 RPM
    • Maximum Power: 337 Watts
    • Output Shaft Diameter: 0.313 in. (8mm)
    • Output Shaft Length: 1.245 in.
    • Stall Current: 133 AMPs
    • Stall Torque: 343.4 in-oz
    • Voltage: 12 Volts DC
    • Weight: 2.8 lbs

    485 Servo Pack

    #39197
    $48.38

    485 Servo Pack  is one of the best choices for rugged robotic applications. This servo’s great performance and durability are a combination of karbonite gears, high-performance circuitry, and a ball bearing-supported output shaft. Karbonite gearing is nearly four times stronger than nylon gears and provides virtually wear-free performance. Standard rotational range is 90 degrees, but it can be operated to 180 degrees with controllers capable of generating a pulse range from 600 usec to 2400 usec. Produces nearly 84 oz-in of torque power.

    Continuous Rotation Servo

    #40379
    $44.19

    1425CR Continuous Rotation Servo keeps things rolling. It has fully proportional speed (forward and reverse) for precise movements.

    • Operating Voltage: 6 volts
    • Stall Torque: 42 oz/in
    • Weight: 42.8 grams per servo and hub

    Hi-Tec Deluxe Standard Servo, model HS-422 (am-0010)

    #am-0010
    $23.06
    (En stock)

    HS-322HD Standard Servo

    #40538
    $31.10

    HS-322HD Standard Servo features karbonite gears nearly four times stronger than nylon. 

    • Operating Voltage: 6 volts
    • Stall Torque: 51 oz/in
    • Weight: 44.1 grams per motor

    Linear Servo RC Actuator 140-200

    #75014
    $91.65
    (50 En stock)

    The Studica Linear Servo RC Actuator 140-200 is a new Servo motor which has a stroke of 140mm. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Linear Servo RC Actuator 140-50

    #75013
    $91.65
    (50 En stock)

    The Studica Linear Servo RC Actuator 140-50 is a new Servo motor which has a stroke of 140mm. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Linear Servo RC Actuator 50-200

    #75011
    $85.10
    (50 En stock)

    The Studica Linear Servo RC Actuator 50-200 is a new Servo motor which has a stroke of 50mm. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Linear Servo RC Actuator 50-50

    #75010
    $85.10
    (50 En stock)

    The Studica Linear Servo RC Actuator 50-50 is a new Servo motor which has a stroke of 50mm. It works the same way as the any standard rotary servo but in a linear movement. It uses the same 2.54mm Dupont 3-Pin Female wire connector and can be controlled with an RC receiver or any device that controls a servo. Includes mounting brackets.

    Multi-Mode Smart Servo

    #75002
    $31.41
    (1414 En stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:                 20kg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Multi-Mode Smart Servo 200

    #75007
    Demander un devis

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        200RPM at 6V
    Stall Torque:                 35kg.cmkg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Smart Robot Servo Programmer

    #75003
    $17.01
    (595 En stock)

    The Studica Smart Robot Servo Programmer is used for programming the Studica Multi-Model Smart Servo Motor and for testing other standard Servos. Use it to program the Studica Servo to switch between continuous mode, standard mode, or any custom angular mode.  

    Specifications:

    • Requires 6 Volt battery pack with TJC8 connector or use the Studica 6V DC Battery Holder.
    • Programming setting modes
      • Standard
      • Continuous
      • Angular

    Tetrix Max Continuous Rotation Servo

    #39177
    $49.10

    TETRIX MAX Continuous Rotation Servo enables precise movements of robot designs. Unlike other servos that have a limited range of motion, this servo rotates continuously in either direction – as needed for wheels. This high-quality servo is designed with a wide neutral dead band to eliminate the “creep” that occurs in many other continuous rotation servos. Dual ball bearings on the output shaft ensure long-lasting performance.

    Note: This servo does not have position feedback.

    S-Motor 6-9V

    #32293
    $35.11

    32293: S-Motor 6-9V

    Tetrix Max Quarter-Scale HS-755HB Servo Motor with Horn

    #39904
    $57.75

    TETRIX MAX Quarter-Scale HS-755HB Servo Motor with Horn offers a whopping 183 oz-inches of torque, 180-degree rotation, and superior strength and performance. Perfect for robot builds that require more power and durability. The servo features Karbonite gears that offer incredible toughness and strength. Attach this Quarter-Scale Servo to your TETRIX robot with ease with one of our new Quarter-Scale Servo Mounting Brackets.

    Each servo includes one TETRIX Aluminum Servo Horn.

    Tetrix Max ¼ Scale - Winch Servo Motor & Horn

    #39905
    $102.46

    TETRIX MAX Quarter-Scale HS-785HB Winch Servo Motor with Horn is a super-duty servo with advanced features. Incorporated into this servo are heavy-duty Karbonite gears and integrated circuitry for accurate positioning over a 1,260-degree range (3.5 rotations). Delivering a maximum torque of 183 oz-inches, this unique servo offers greater rotational range control and power to TETRIX robot builds. Attach this quarter-scale servo to your TETRIX robot with ease with one of our Quarter-Scale Servo Mounting Brackets.

    Each servo includes one nylon dual-wind pulley and one TETRIX Aluminum Servo Horn.