Can be used with 6mm D-Shaft Axel and 6mm shaft DC motor. 

Specifcations:

• Material: 6061-T6 Aluminum
• Inside Diameter: 6mm
• Outside Diameter: 12mm
• Step File

Specifications:

• Size: 1/10 standard car
• Material: Aluminum alloy
• Total length: 63mm
• Ball head to ball head: 55mm
• Diameter: 17mm 
• Ball head hole diameter: 3mm  
• Step File - Shock in compressed mode
• Step File - Shock in extended mode

The Small Thrust Ball Bearing is used for vertical and axial loads to withstand heavy loads. These ball bearings have track grooves on the upper and lower track boards to reduce friction. Use these with structure for any hole where an axial load will be applied.

Specifications:

• Inner Diameter - 6mm
• Outer Diameter - 12mm
• Height - 4.5mm
• Material: Chrome Steel GCr15

The Studica Smart Robot Servo Programmer is used for programming the Studica Multi-Model Smart Servo Motor and for testing other standard Servos. Use it to program the Studica Servo to switch between continuous mode, standard mode, or any custom angular mode.  

Specifications:

• Requires 6 Volt battery pack with TJC8 connector or use the Studica 6V DC Battery Holder.
• Programming setting modes
  • Standard
  • Continuous
  • Angular

The 5mm Round Groove Belt is 3M long and has a 10% stretch. It is also referred to as a U Groove belt. 

• Material - Polyurethane
• Diameter - 5mm
• Length - 3m
• Color - Yellow
• Stretch factor - 10%
• Surface - smooth
• Solid core
• Open end

Includes,

• 4 - 100mm Drive Wheel, 50A, 12.5mm wide, 1/2" Inner Hex, Blue  76261
• 4 - 100mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue  76262
• 4 - 50mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue  76269
• 4 - Omni Wheel (100mm, Double Plastic, w/ integrated 6mm Hub)  76260
• 2 - 6mm x 96mm D-Shaft (6 pack)  76161-6
• 1 - 6mm x 432mm D-Shaft (2 pack)  76162-2
• 1 - Bushing Bronze 6mm ID x 8mm OD (12 Pack)  76300-12
• 1 - Bushing Bronze 6mm ID x 14mm OD (12 Pack)  76301-12
• 1 - Flange Bearing  6mm ID, 14mm OD, 15mm Flange (12 Pack)  76302-12
• 3 - 6mm Shaft Hub (4 pack)  76284-4
• 2 - Collar 6mm ID D-Shaft, 12mm OD (6 pack)  76304-6
• 1 - Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (24 pack)  76305-24

The XL series belt is compatible with the 6mm, 10 tooth XL pulley.

Specifications:

• Material: Neoprene with Fiberglass cords
• Length: 1 meter
• Width: 9mm

The pulleys are .40” inside the flanges to allow for belts up to 3/8” in width. Two set screws using 1.5mm hex key.

PRE-ORDER Only shipping January 2023

Φ20.0mm*8.0mm thick
2*M3 thread for M3 SHCS
on the clamp side
Φ6.0mm D hole
AL6061-T6

Φ29.0mm*16.0mm thick
6*M3 thread tapping through
(including 2*M3 thread for M3 SHCS)
Φ6.0mm D hole
AL6061-T6

Specifications:

• Material: 6061-T6 Aluminum
• Thickness: 6mm
• Step File

The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 288m, with a 180mm stroke, creating a 470mm extended length. 

IN STOCK

• Width: 24mm
• Height: 7.2mm
• Length: 288mm
• Stroke: 180mm
• Extendended length: 468mm
• Step file

Specifications:

• Size: 1/10 standard car
• Material: Aluminum alloy
• Total length: 108mm
• Ball head to ball head: 100mm
• Diameter: 17mm 
• Ball head hole diameter: 3mm 
• Step File - Shock in compressed mode
• Step File - Shock in extended mode

Includes two 5mm Bore, 10 Tooth Aluminum Pulleys and one 1M XL Timing belt

3/8” wide, 1/5 pitch XL series belti. Constructed of Neoprene with Fiberglass cords for superior strength and wear resistance. Compatible XL series pinion pulley.

The Studica Face Bearing Block can be mounted on any  Studica channel and bracket providing which will allow for a 6mm ID through hole for 6mm shafts (axles). It has a permanently installed Standard Sealed Bearing. Has 8 x M3 tapped through holes for easy mounting.

The Intake Kit can be used to create intake systems and is ideal for the FIRST Technical Challenge (FTC) and World Robotics Olympiad (WRO). Used with the Silicone Rubber Tubing #76410

Specifications:

• Main piece
  • hex width: 20.78mm*10.0mm thick
  • 6*M6 tapped holes
  • 1*M4 tappped hole for M4 set screw
  • 6.0mm Diameter D Hole
  • Material AL6061-T6
  • Φ7.5mm*14.0mm
• Pins
  • 6PCS in a pack
  • M6*4.0mm thread
  • Material SS303
• Step file

The Studica Slide Rail is made of light weight aluminum, is 24mm wide, and is perfect for building a multi-stage slide system. Closed length is 384m, with a 240mm stroke, creating a 530mm extended length. 

IN STOCK

• Width: 24mm
• Height: 7.2mm
• Length: 384mm
• Stroke: 240mm
• Extendended length: 530mm
• Material: 6061 Aluminum
• Step file

GT2 Pulley
Φ22.0mm*13.0mm thick
2*M4 thread for M4 set screws
Φ6.0mm D hole

AL6061-T6

The 125mm All-Terrain Wheel Set includes two left and two right rubber wheels. They have a foam core and therefore do not require air. They grip well on smooth, hard surfaces and are perfect for travel on uneven surfaces where you may have mulch, sand, dirt, or gravel. They are designed and manufactured by Studica to work with the Studica Robotics Building platform and other building sets. The All-Terrain wheels have been tested up to 40kg (88 lbs) using all four wheels.

Specifications,

• 2 Left Wheels and 2 Right Wheels
• Diameter: 125mm
• Width: 47.1mm
• Step files

Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels 

Specifcation:

• Material: 6061-T6 Aluminum
• 6mm ID
• Hole pattern for connecting to structure
• Step File 

The M3 x 10mm Low Profile Screw with Kep Nut is a 304 Stainless Steel m3 Din 7991 Countersunk Hex Socket Flat Head Screw with a matching Kep Nut. This package is made for the Slide Rail, 288mm Length, 180mm Stroke and the Slide Rail, 384mm Length, 240mm Stroke

Includes,

• 6 - M3 x 10mm Low Profile Screw
• 6 - Kep nut

• GT2 Pulley
• Φ41.2mm*13.0mm thick
• M3 pass through holes SHCS should
• sit flush
• Bearing hole, the bearing should
• AL6061-T6

This stretchy latex rubber tubing is sized to fit through any of the M3 holes in the Studica Robotics channel, brackets, wheels, gears or other motion products. 

Specifications

• Color: Black
• Material: Rubber Latex
• Length: 3m
• Outer Diameter: 3mm

This kit includes the tools need to cut and join a urethane belt. Recommended for the 5mm Urethane Round Belt - part # 76400

This kit includes the tools need to cut and join a urethane belt. Recommended for the 5mm Urethane Round Belt - part # 76400

64 Tooth 5mm Pitch GT2
Belt 9mm wide
Rubber

Black

• 82 Tooth 5mm Pitch GT2
• Belt 9mm wide
• Rubber
• Black