Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    NiMH Battery Pack Charger, PP45

    The Studica NiMH Battery Pack Charger, PP45, is used to recharge the 12V 3,000 mAh NiMH Battery Pack, PP45

    Specifications

    • Rating AC Input: 100V to 240V AC, 0.6A RMS, 50/60 Hz
    • Rating Output: 7V to 16 VDC
      • 0.9A to 1.8A
    • Protection mode: output short circuit protection and output polarity reverse protection.
    • Temperature range 0C ~+40C (battery pack)
    • Operate Humidity: 5% ~ 90%

    LED Indication

    Red Normal Main Charge mode
    Green Normal Finished / Open mode
    Red / Green Flashing Short Circuit

     

    # Pièce: 70019
    $41.66
    Disponibilité: 1742 en stock
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    Servo Horn 25T

    #76148
    $5.54
    (876 En stock)

    The Servo Horn 25T is made of anodized 6061-T6 Aluminum and is used with the Multi-Mode Smart Servo (75002) and the Studica building structure.

     

     

     

    Clamping Shaft Hub - v2

    #76280
    $11.05
    (1154 En stock)

    Made of aluminum, the Studica Clamping Shaft Hub is used with flex and drive wheels 

    Specifcation:

    • Material: 6061-T6 Aluminum
    • 6mm ID
    • Hole pattern for connecting to structure
    • Step File 

    Tetrix Max Motor Mount Pack

    #39089
    $15.63

    TETRIX MAX Motor Mount Pack attaches the DC Drive Motor to your robot. Includes the Motor Mount, two kep nuts, and two cap screws.

    • Nominal Size: 72 mm x 12.7 mm
    • Material: 7005 Aluminum

    6mm Servo Hub 25T

    #76149
    $8.32
    (572 En stock)

    The 6mm Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axel.

     

    Inside L Bracket (2 pack)

    #76089-2
    $8.32
    (903 En stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the Inside L Bracket is 42mm x 45mm and is used inside the U Channel or Low profile channel.As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    XT30 (MH-FC) to Tamiya (MH-FC) Cable

    #70179
    $5.54