Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Outils

    Outils
    Voir comme Grille Lister
    Trier par
    Affichage par page

    2.5mm Hex Ball End Screwdriver

    #70142
    $8.26
    (3036 En stock)

    6 in 1 Screwdriver

    #70141
    $8.26
    (241 En stock)

    Includes 6 bits,

    • Slotted 3.3
    • Phillips: OHO
    • Hex 1/16inch
    • Hex 3/32inch
    • Hex 7/64inch

    Chain Breaker Tool

    #76231
    $41.34
    (44 En stock)

    The easy way to change the length of your #25 chain. (Chain not included)

    Combination Wrench, 5.5mm

    #70145
    $9.64
    (1147 En stock)

    Ferrule Crimp Tool

    #am-3739
    $44.00
    (En stock)

    This crimp tool is used in non welding, standard electrical connections, for tubular bare terminals and tubular pre-insulated terminals. This tool can be used with ferrules like these: 20 AWG Ferrule, 18 AWG Ferrule, 16 AWG Ferrule and 12 AWG Ferrule.

    Specifications:

    • Application: Bushing Type Terminal
    • Crimping capability: 0.25 - 10 mm2
    • American Standard AWG: 23-7
    • Length: 175mm
    • Weight: 0.79 Pounds

    Powerpole Crimp Tool 15/30/45

    #70143
    $52.37
    (82 En stock)

    This crimp tool is the ultimate Powerpole crimper. The jaws work for 15, 30, and 45 connectors. This crimp tool has a built-in positioner to hold the contacts during crimping. The ratchet mechanism assures proper crimps every time.

     

    The 15 amp connector and be crimped with 16 28 and 20 AWG wire. The 30 amp connector can be crimped with 12 and 14 AWG wire. 45 amp connector can be crimped with 10-12 AWG wire.

    PRO-CRIMP Crimp Tool

    #am-3326
    $85.00
    (En stock)

    This is a high quality crimping tool for non-insulated terminals crimps. It works for 8, 6, 4, and 2 AWG size terminals.

    This crimper works very well as the tool for this #6 Lug Connector. 

    Specifications:

    • Crimp Sizes: #2 - #8 AWG
    • Weight: 1.7 lbs
    • Length: 13.6 in
    • Height: 5.5 in
    • Width: 0.9 in

    Robotics Toolbox

    #70055
    $39.98
    (384 En stock)

    Has two compartments on the lid for tools and electronics.

    • Material: PP
    • Size: 59*36*32cm (23" x 14" x 12.6")
    • Capacity: 55L

    Urethane Belt Joining Kit, 110V

    #76401
    $274.33
    (4 En stock)

    This kit includes the tools need to cut and join a urethane belt. Recommended for the 5mm Urethane Round Belt - part # 76400

    Urethane Belt Joining Kit, 220V

    #76402
    $274.33
    (10 En stock)

    This kit includes the tools need to cut and join a urethane belt. Recommended for the 5mm Urethane Round Belt - part # 76400

    DarkSoul #25 Chain Break

    #am-4024
    $49.00
    (En stock)

    Never again should you look at chain as a dark, soulless thing full of frustration and anger. This tool will show that mess who's boss. Bring joy and simplicity to your builds and never again be kept from finishing behind schedule.  

     

    The block (which is made from aluminum for added lightness) holds your chain steady while you use the screws to press a pin out of a link and ... Break the Chain!

     

    This tool can also be used to re-assemble chains without using a master-link. You'll need a bit of skill and a dash patients, and maybe some practice but in the end its not that hard.

     

    This will only work for #25 chain but we do also have a 35 Chain Break for the hefty chains around.

     

    Specifications

    • Chain Size: #25

    ARC #35 Chain Break

    #am-4022
    $35.00
    (En stock)

    Have you ever needed to make a 35 series chain shorter? Well this is the tool for you!

     

    The block holds your chain steady while you use the screws to press a pin out of a link and ... Break the Chain

     

    This tool can also be used to re-assemble chains withOUT using a master-link. You'll need a bit of skill and a dash of patients, and maybe some practice but in the end its not that hard. 

     

    This will only work for #35 chain but we do also have a #25 Chain Break for the smaller chains in your life.

     

    Specifications

    • Chain Size: #35

    Reflective Tape Material 3M, 2 in. wide x 20 ft., adhesive backed

    #am-2934
    $75.00
    (En stock)

    This is 20 feet of 3M Scotchlite reflective 8830 material that has commonly been used on the FIRST Robotics Competition field.

     

    It is great for creating a visual target for camera systems in robotic applications. It has wide angle exposed retro-reflective lenses bonded to an adhesive.



    This material is 2" wide, flexible, and has a strong adhesive backing. It may have up to one seam somewhere along the 20 ft.

     

    When used properly, Scotchlite reflective material PSA films help enhance the visibility of whatever surface it's applied to in low-light conditions when illuminated by a light source, such as flashlights or vision lighting, by returning the light back toward the original source reaching the cameras lens.

     

    Specifications

    • Adhesive: Acrylic
    • Color: silver
    • Length: 20 ft
    • Manufacturer: 3M
    • Manufacturer Part #: 8830 (aka 75-0002-0009-9)
    • Material: 94% polyester / 6% nylon tricot knit
    • Weight: 0.25 lbs
    • Width: 2 in.

    PWM crimp tool multi-series contacts

    #am-2672
    $55.00

    This is a crimping tool for PWM male or female pins when making your own custom cable. It works wonderfully with the Male PWM Connectors and Female PWM Connectors

     

    Specifications

    • Length: 8.3 in.
    • Style: mechanical full cycle ratchet
    • Weight: 2 lbs

    #25 Inline Chain Tensioner

    #am-3915_25
    $22.00
    (En stock)

    This Inline Chain Tensioner for #25 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #25 Master Links and integrate this to your project for an easy-to-use chain tension solution!

     

    The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.

     

     

    Specifications

    • Chain Size: #25

     

    Documents

    CAD File(s)

    am-3915_25 25 Chain Inline Tensioner REV3.STEP

    Layout Print(s)

    am-3915_25 #25 Chain Inline Tensioner REV3.PDF

    #35 In line Chain Tensioner

    #am-3914_35
    $23.00
    (En stock)

    This Inline Chain Tensioner for #35 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #35 Master Links and integrate this to your robot for an easy-to-use chain tension solution!

     

    The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.

     

    Specifications

    • Chain Size: #35

     

    Documents

    CAD File(s)

    am-3914_35 35 Chain Tensioner.STEP

    Layout Print(s)

    am-3914_35 #35 Chain Inline Tensioner.PDF