Specifications:

• Inner Diameter: 0.219"
• Outer Diameter: 0.500"
• Finish: Zinc
• Bolt Size: #10
• Material: Steel
• Nominal Thickness: 0.046"

Whether you have shafts that are too short or shafts of different types, this coupling will solve every component connection issue you've had! Need to combine multiple hex shafts, multiple 1/2-inch keyed shafts, or convert between hex and keyed? This coupling solves all at a better price than anyone else can offer!

Shaft Compatability

This coupling has geometry to capture 0.50-inch hex shafts with an inside hex of 0.51 to 0.52 inches as well as 0.5 inch keyed shafts with a 1/8th inch keyway with a keyway width of 0.128 inches to 0.131 inches.

This bearing plate is a great way to mount a 0.875 in. OD (FR6) bearing into thin or weak material that otherwise could not tolerate or support a press-fit.

Specifications:

• Material: 5052 Aluminum
• Bore: Press fit for FR6 bearing
• Thickness: 0.125 in.
• Bolt Pattern: 4x clearance for #10-32 on 2.00 in. circle
• Length: 1.875 in.
• Width: 1.875 in.
• Weight: 0.032 Pounds

0.188 inch thick spacer, 1/2" nominal id, made from Nylon 

Specifications:

• Material: Nylon
• Inside diameter: 0.505"
• Outside diameter: 0.75"
• Thickness: 0.188"
• Weight: 0.0018 Lb

Specifications:

• Inside diameter: 0.500 inch
• Outside diameter: 1.125 inch
• Overall Thickness: 0.312 inch
• Weight: 0.046 pounds

Product Overview: 

• 1/2" id, shielded, flanged ball bearing 

Specifications:

• Inside Diameter: 0.500 inch
• Outside Diameter: 1.125 inch
• Flange Thickness: 0.062 inch
• Overall Thickness: 0.312 inch
• Weight: 0.052 pounds
• Material: Steel

1/2" i.d. Plastic Washer 

Specifications:

• Quantity: 50
• Material: Black Nylon Plastic
• Inside Diameter: 0.510"
• Outside Diameter: 0.75"
• Thickness: 0.06"
• Weight: 0.072 Lb

Specifications:

• Inside Diameter: 0.500 inch
• Outside Diameter: 1.125 inch
• Overall Thickness: 0.249 inch
• Weight: 0.038 pounds
• Material: Steel

Steel sleeve bushing with self-lubricating bearing surface 

Specifications:

• Structure material: steel
• Lubrication material: TPFE, located on the inside diameter
• Bore: 0.500 inch
• Outside diameter: 0.598 inch
• Overall length: 0.500 inch
• Weight: 0.012 pounds

Bronze sleeve bushing with oil impregnation 

Specifications:

• Bore: 0.250 inch
• Outside diameter: 0.313 inch
• Overall length: 0.500 inch
• Weight: 0.0036 pounds

Specifications:

• Material: Steel
• Coating: Zinc Plated
• Inside Diameter: 1/4"
• Outside Diameter: 0.63"
• Thickness: 0.056"

This is a brass plug for a 1/4" NPT port.

Specifications:

• Weight: 0.3 lbs
• Height: 0.593 in
• Material: Brass with nickel plating
• Hex width: 17 mm or 11/16 in wrench
• Ports: 1/8" NPT male
• Pressure range: 0-250 psi

This is a Nylon plug for a 1/4" NPT port.

Specifications

• Hex Width: 0.525"
• Length: 0.715"
• Material: Nylon
• Operating Pressure: 0-200 psi
• Port(s): 1/8" NPT male
• Weight: 0.01 lbs

This is a pneumatic meter-out flow control valve. The port is a 1/8" NPT male thread, and 1/4" diameter tube can be pressed in to the push-to-connect fitting.
 

Meter-out allows for the flow to be controlled in one direction, while the opposite flow is not restricted.

Specifications

• Hex Width: 7/16 in.
• Material: Rotating thermoplastic (PBT) body, nickel-plated brass threads, stainless steel tube griping claws, and pre-applied Teflon thread sealant
• Port(s): 1/8 in. NPT male with pre-applied Teflon thread sealant
• Weight: 0.01 lbs

This is a brass plug for a 1/8" NPT port.

Specifications:

• Weight: 0.018 pounds
• Hex width: 0.44"
• Height: 0.52"
• Material: Brass
• Ports: 1/8" male
• Pressure range: 0-250 psi