Pignons et Chaîne
Pignons et Chaîne
Pin Replacement Kit For Dark Soul #25 Chain Break Tool
This pin kit can be used as replacement components for the Dark Soul #25 Cahin Break Tool. One pin is used to hold the chain in place while working with the chain while the other pin pushes out a pin in chain, thus breaking the chain.
25 Series Symmetrical Hub Sprockets 500Hex, 14 Tooth
The 25 Series Plate Sprockets: They roll! They turn! They spin! Everything you could possibly want from a plate sprocket.
These Aluminum sprockets work perfectly with hex shaft and mesh with #25 roller chain.
25 Series Symmetrical Hub Sprockets 500Hex, 18 Tooth
9 different offerings of our 25 Series Hub Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These aluminum sprockets work perfectly with 1/2 in. hex shaft and mesh with #25 roller chain. They are symmetrical and have the same sized hub on both sides so there's no wrong way to install them. The hub is also sized to ride on only the inner race of a bearing for smooth motion without binding or rubbing.
Note: Despite the prints, at this time, tooth alignment to the bore is not controlled on these sprockets.
| Part Number | Tooth Count | Bore | Pitch Diameter (in.) | Outside Diameter (in.) |
|---|---|---|---|---|
| am-4772 | 10 | 8mm key | 0.810 | 0.928 |
| am-4773 | 14 | 1/2 in. Hex | 1.123 | 1.251 |
| am-4774 | 14 | 3/8 in. Hex | 1.123 | 1.251 |
| am-4775 | 18 | 1/2 in. Hex | 1.440 | 1.572 |
| am-4776 | 18 | 3/8 in. Hex | 1.440 | 1.572 |
| am-4777 | 22 | 1/2 in. Hex | 1.757 | 1.893 |
| am-4778 | 22 | 3/8 in. Hex | 1.757 | 1.893 |
| am-4779 | 26 | 1/2 in. Hex | 2.074 | 2.212 |
| am-4780 | 26 | 3/8 in. Hex | 2.074 | 2.212 |
Specifications
- Chain Series: 25
- Material: 7075 Aluminum
- Thickness: 0.500 in.
25 Series Symmetrical Hub Sprockets 500Hex, 22 Tooth
The 25 Series Plate Sprockets: They roll! They turn! They spin! Everything you could possibly want from a plate sprocket.
These Aluminum sprockets work perfectly with hex shaft and mesh with #25 roller chain.
35 Series Symmetrical Hub Sprockets 500Hex, 10 Tooth
11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.
Specifications
- Bolt Circle: 0.206 in. diameter holes on a 1.875 in. diameter circle
- Chain Series: 35
- Inside Diameter: 1.1245 in.
- Material: 6061 Aluminum
- Thickness: 0.168 in.
35 Series Symmetrical Hub Sprockets 500Hex, 14 Tooth
11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.
Specifications
- Bolt Circle: 0.206 in. diameter holes on a 1.875 in. diameter circle
- Chain Series: 35
- Inside Diameter: 1.1245 in.
- Material: 6061 Aluminum
- Thickness: 0.168 in.
35 Series Symmetrical Hub Sprockets 500Hex, 18 Tooth
11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.
Specifications
- Bolt Circle: 0.206 in. diameter holes on a 1.875 in. diameter circle
- Chain Series: 35
- Inside Diameter: 1.1245 in.
- Material: 6061 Aluminum
- Thickness: 0.168 in.
35 Series Bearing Bore Plate Sprockets 22 Tooth
11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.
35 Series Bearing Bore Plate Sprockets 28 Tooth
11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.
35 Series Bearing Bore Plate Sprockets 34 Tooth
11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.
35 Series Bearing Bore Plate Sprockets 40 Tooth
11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.
35 Series Bearing Bore Plate Sprockets 46 Tooth
11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.
35 Series Bearing Bore Plate Sprockets 52 Tooth
11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.
35 Series Bearing Bore Plate Sprockets 58 Tooth
11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.
35 Series Bearing Bore Plate Sprockets 64 Tooth
11 different offerings of our 35 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These Aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #35 roller chain.
25 Series Bearing Bore Plate Sprockets - 74 Tooth
8 different offerings of our 25 Series Plate Sprockets. These are perfect for meshing with roller chain and finally getting that-thing-that-you-need-to-spin moving!
These aluminum sprockets work perfectly with any of our 6 hole hubs and mesh with #25 roller chain. They also work with other build systems that use a 2 in. bolt circle for mounting. The larger versions also have a mounting pattern compatible with 2x1 box tube usefull for making arms.