Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Pneumatique

    Pneumatique
    Voir comme Grille Lister
    Trier par
    Affichage par page

    1/4" NPT Hex Head Brass Plug

    #am-2185
    $5,00
    (En stock)

    This is a brass plug for a 1/4" NPT port.

    Specifications:

    • Weight: 0.3 lbs
    • Height: 0.593 in
    • Material: Brass with nickel plating
    • Hex width: 17 mm or 11/16 in wrench
    • Ports: 1/8" NPT male
    • Pressure range: 0-250 psi

    1/4" NPT Hex Head Plug

    #am-2959
    $3,75
    (En stock)


    This is a Nylon plug for a 1/4" NPT port.

    Specifications

    • Hex Width: 0.525"
    • Length: 0.715"
    • Material: Nylon
    • Operating Pressure: 0-200 psi
    • Port(s): 1/8" NPT male
    • Weight: 0.01 lbs

    1/8 NPT Male to 1/4 Tube, Elbow Meter-Out Flow Valve

    #am-2897
    $14,00
    (En stock)

    This is a pneumatic meter-out flow control valve. The port is a 1/8" NPT male thread, and 1/4" diameter tube can be pressed in to the push-to-connect fitting.
     

    Meter-out allows for the flow to be controlled in one direction, while the opposite flow is not restricted.

     

    Specifications

     

    • Hex Width: 7/16 in.
    • Material: Rotating thermoplastic (PBT) body, nickel-plated brass threads, stainless steel tube griping claws, and pre-applied Teflon thread sealant
    • Port(s): 1/8 in. NPT male with pre-applied Teflon thread sealant
    • Weight: 0.01 lbs

    1/8" NPT Hex Head Brass Plug

    #am-2024
    $4,61
    (En stock)

    This is a brass plug for a 1/8" NPT port.

    Specifications:

    • Weight: 0.018 pounds
    • Hex width: 0.44"
    • Height: 0.52"
    • Material: Brass
    • Ports: 1/8" male
    • Pressure range: 0-250 psi

    1/8" NPT Hex Head Plug

    #am-2958
    $3,46
    (En stock)


    This is a Nylon plug for a 1/8" NPT port.

    Specifications

    • Hex Width: 0.435"
    • Length: 0.575"
    • Material: Nylon
    • Operating Pressure: 0-200 psi
    • Port(s): 1/8" male
    • Weight: 0.01 lbs

    20 meters of Pneumatic tubing, 1/4 inch od, polyurethane, black

    #am-2137
    $27,68
    (En stock)

    This is a 20 meter length of black, polyurethane pneumatic tubing.

    Specifications: 

    • Outside Diameter: 0.25 inch
    • Inside Diameter: 0.15-0.16 inch
    • Length: 20 meters (66ft)
    • Material: Polyurethane
    • Color: Black
    • Pressure Rating: 125 psi at 75 degrees Fahrenheit (see here for manufacturer's support of this rating)
    • Weight: 1.1 pounds for 20 meters

    590 ml Air Reservoir with 1/4 in. NPT ports

    #am-2479
    $27,00
    (En stock)

    This is a polypropylene plastic air tank accumulator holding 36.0 cubic inches (~590ml) up to a pressure of 125 psi and a burst rating of 500 psi.

    This tank has 1/4" NPT ports (2).

    Specifications:

    • Weight: 0.64 pound
    • Capacity: 36.0 cubic inches (590 ml)
    • Ports: Two 1/4" NPT female (one on each end)
    • Material: Polypropylene Plastic
    • Working pressure rating: 125 psi
    • Burst pressure rating: 500 psi
    • Max. temperature rating: 100 F
    • Length: 12.1 inches
    • Diameter: 2.7 inches

    Ball Valve, 1/4" NPT Male x Female, Lever Handle, Chrome Plated

    #am-2023
    $13,07
    (En stock)

    This is a steel ball valve, with a large plastic handle. On mobile robots, this can act as a vent valve. It has two ports, one being a 1/4" NPT male and one being a 1/4" NPT female port

    Specifications:

    • Weight: 0.19 pound
    • Width: 1.71 inch
    • Height: 1.45 inch
    • Hex Body Width: 0.82 inch
    • Material: Steel, chrome plated
    • Manufacturer: Midwest Control
    • Part Number: CMVL-25
    • Capacity: 450 psi (cold working pressure)
    • Medium: compressed air
    • Temperature Range: -4 to 250 degrees F
    • Ports: 1/4" NPT (one male, one female)

    Double Solenoid Valve, Mead, 1/8 NPT

    #am-3324
    $139,00
    (En stock)

    Three (3) straight 1/8 NPT fittings (or right angle 1/8 NPT fittings) are NOT INCLUDED with this part, but are needed to connect tubing to this valve.

    Specifications:

    • Type: In-line, individual
    • Size: 170mm x 67mm x 22mm
    • Valve function: 5 Port-2 Position
    • Port size: 1/8" NPT
    • pilot air supply: Internal
    • Cable length:
    • Voltage: 12Vdc
    • Weight: 0.72 lbs
    • Pressure Range: 22 - 116 psi
    • Max. pressure: 215 psi
    • Max Response Time: 50ms
    • Flow rating: 0.78 Cv

    Female Fitting, 1/8" NPT, 1/4" tube

    #am-2033
    $7,69
    (En stock)

    This is a fitting intended on remotely-mounting a pressure gauge. This fitting can be mounted to a panel, through a 9/16" hole, and it has a 1/8" NPT female port.

    Specifications:

    • Weight: 0.08 pound
    • Width: 0.69 inch
    • Height: 1.23 inch
    • Material: Steel with plastic
    • Medium: air pressure
    • Ports: 1/8" NPT female
    • Pressure range: 0-150 psi

    Fitting, Adapter, 1/8 NPT Male, 1/4 NPT Female

    #am-2381
    $3,85
    (En stock)

    This is a brass adapter fitting with a male 1/8" NPT thread and a female 1/4" NPT port.

    This fitting helps out an application when a device with a 1/4" NPT male thread needs to fit into a 1/8" NPT female port.

    Specifications:

    • Weight: 0.05 lbs
    • Length: 0.91 inch
    • Hex width: 0.67 inch, turned with a 11/16 wrench
    • Material: Brass with nickel plating
    • Ports: 1/8" NPT male, 1/4" NPT female
    • Pressure rating: 230 psi

    Fitting, Brass, Hex Nipple, 1/4" NPT

    #am-2188
    $3,85
    (En stock)

    This is a straight line Union Hex Nipple with 1/4" NPT Thread on both sides.

    Specifications:

    • Weight: 0.3 lbs
    • Width: 0.525 in
    • Length: 0.99 in
    • Material: Brass with nickel plating
    • Hex width: 0.5 in
    • Ports: Two Male 1/4" NPT Thread
    • Pressure range: 0-250 psi

    Fitting, Brass, Hex Nipple, 1/8" NPT

    #am-2187
    $3,08
    (En stock)

    This is a straight line Union Hex Nipple with 1/8 NPT Thread on both sides.

    Specifications:

    • Weight: 0.01 lbs
    • Width: 0.39 in
    • Length: 0.825 in
    • Material: Brass with nickel plating
    • Hex width: 0.5 in
    • Ports: Two Male 1/8" NPT Thread
    • Pressure range: 0-250 psi

    Fitting, Cross, Brass, 1/8" NPT, 3 F, 1 M

    #am-2380
    $6,15
    (En stock)

    This is a Nickel plated Brass cross union with three (3) Female connections with 1/8 NPT thread and one (1) male connection at 1/8 NPT.

    This part can replace heavier brass manifold pieces and makes your pneumatic system lighter.

    Specifications:

    • Weight: 0.08 lbs
    • Width: 1.65 in
    • Height: 0.51 in
    • Depth: 1.58 in
    • Material: Brass with nickel plating
    • Ports: 3 Female 1/8 NPT, 1 male 1/8 NPT
    • Pressure rating: 230 psi

    Fitting, Nylon, Hex Nipple, 1/4" NPT

    #am-2962
    $4,23
    ( 2 En stock)

    This is a straight line Union Hex Nipple with 1/4" NPT Thread on both sides.

    Specifications:

    • Weight: 0.01 lbs
    • Length: 1"
    • Material: Nylon
    • Hex width: 0.425"
    • Ports: Two Male 1/4" NPT Thread
    • Pressure range: 0-200

    Fitting, Nylon, Hex Nipple, 1/8" NPT

    #am-2961
    $3,85
    (En stock)

    This is a straight line Union Hex Nipple with 1/8 NPT Thread on both sides.

    Specifications:

    • Weight: 0.01 lbs
    • Length: 1.25"
    • Material: Nylon
    • Hex width: 0.565"
    • Ports: Two Male 1/8" NPT Thread
    • Pressure range: 0-200 psi