Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Poulies et courroies

    Poulies et courroies
    Voir comme Grille Lister
    Trier par
    Affichage par page

    6mm XL Pulley, 10 Tooth (2 pack)

    #76232-2
    $17.91
    (154 En stock)

    Used with Maverick DC Motor with 6mm shaft and all 6mm D-Shaft Axels. Matching belt 10mm Timing Belt, # 76233.

    Specifications:

    • 10 Tooth Timing Pulley
    • 6mm Bore 
    • material: 6061 T6 Aluminum
    • Step File

    XL Timing Belt

    #76233
    $6.88
    (721 En stock)

    The XL series belt is compatible with the 6mm, 10 tooth XL pulley.

    Specifications:

    • Material: Neoprene with Fiberglass cords
    • Length: 1 meter
    • Width: 9mm

    250 Sprocket and Pulley Spacer

    #am-0207a
    $6.15
    (En stock)

    This 250 sprocket spacer can be used when chain needs more room from a mounted part. This spacer can also be used to mount our Pulley, 42 Tooth (am-2234) to our line of Plaction and Performance Wheels. This spacer is one of the many rigid parts that makes up the Rhino Track Drive Module (am-3322).

    Specifications:

    • Material: Polycarbonate, black
    • Thickness: 0.250 inch
    • Outside diameter: 2.25 inch
    • Hole pattern: 6 holes, 0.204 inch diameter, on a 1.875 diameter bolt circle
    • Weight: 0.026 pounds

    42 Tooth Pulley

    #am-2234a
    $11.95
    (En stock)

    This is the 42 tooth pulley used in the AM14U family of chassis. It works with all 5 mm pitch HTD timing belts. This pulley has a 1.875 in. bolt circle making it easy to attach to many of our motion components. It also has a locking pattern that is compatible with many of our wheels.

    This pulley comes as two identical halves that mesh with each other to create one pulley that is the correct width for a 15 mm timing belt.

    Need to have two 15 mm belts on one pulley? Add in the 15 mm wide, 42 Tooth Pulley Extension (am-2813) and you can run two belts in two different directions.

     

    Specifications

    • Belt Profile: 5 mm pitch HTD timing belt, 15 mm wide
    • Bolt Pattern: 0.2 in. diameter holes, evenly spaced on a 1.875 in. diameter bolt circle
    • Bore: 0.95 in., with bearing pocket of 1.124 in. diameter x 0.25 in. deep
    • Flange Diameter: 2.92 in.
    • Material: Black Polycarbonate
    • Outside Diameter: 2.575 in. (at outer tooth edge)
    • Pitch Diameter: 2.632 in.
    • Teeth: 42
    • Weight: 0.12 lbs
    • Width: 0.85 in. (both halves assembled together)

    Timing Belt, 160 Tooth, Gates 5mm HTD, 15mm wide

    #am-2266
    $36.90
    (En stock)

    This is a Gates HTD timing belt, manufacturer part number 800-5M-15

    Usage: Axle Locations for AM14U Variations

    Specifications:

    • Number of Teeth: 160
    • Pitch Length: 31.50 inches (800 mm)
    • Width: 15mm
    • Tooth profile: 5mm pitch HTD
    • Kevlar reinforced
    • Weight: 0.1 pounds

    Timing Belt, 104 Tooth, Gates 5mm HTD, 15mm wide

    #am-2267
    $23.06
    (En stock)

    Product Overview:
    This is a Gates HTD timing belt, manufacturer part number 520-5M-15 

    Specifications:

    • Number of Teeth: 104
    • Pitch Length: 20.47 inches (520 mm)
    • Width: 15mm
    • Tooth profile: 5mm pitch HTD
    • Kevlar reinforced
    • Weight: 0.08 pounds

    39 Tooth HTD Plastic Pulley Kit

    #am-2361a
    $14.00
    (En stock)

    Here is a 39 tooth HTD profile pulley, fitting any two 15 mm wide HTD timing belts. This is shipped as an un-assembled kit. The center bore accepts any flanged bearings with a 1.125 in. OD. It can also accept any of our legacy hubs listed here:


    500EX Hex Hub am-2568

    500EX Key Hub am-0976

    625 Key Hub am-0214a

    10 mm Key Hub am-0985a

    10 mm DD Bore Hub am-2279

    0.375 in. Hex Hub am-2231b

     

    Specifications

    • Belt Profile: 5 mm pitch HTD timing belt, 15 mm wide
    • Flange Diameter: 2.65 in.
    • Material: Black Polycarbonate
    • Outside Diameter: 2.40 in.
    • Pitch Diameter: 2.44 in.
    • Teeth: 39
    • Weight: 0.32 lbs
    • Width: 1.58 in.

    Timing Belt, 170 Tooth, Gates 5mm HTD, 15mm wide

    #am-2570
    $39.00
    (En stock)

    This is a Gates HTD timing belt, manufacturer part number 850-5M-15

    Usage: Axle Locations for AM14U Variations 

    Specifications:

    • Number of Teeth: 170
    • Pitch Length: 33.46 inches (850 mm)
    • Width: 15mm
    • Tooth profile: 5mm pitch HTD
    • Kevlar reinforced
    • Weight: 0.1

    Timing Belt, Gates HTD, 15mm wide, 131T, 655-5m-15

    #am-2571
    $31.98
    (En stock)

    This is a Gates HTD timing belt, manufacturer part number 655-5m-15

    Usage: 
    Axle Locations for AM14U Variations (.pdf)

    Specifications:

    • Number of Teeth: 131
    • Pitch Length: 25.79 inches (655 mm)
    • Width: 15mm
    • Tooth profile: 5mm pitch HTD
    • Kevlar reinforced
    • Weight: 0.1

    Timing Belt, Gates HTD, 15mm wide, 117T, 585-5M-15

    #am-2702
    $29.52
    (En stock)

    This is a Gates HTD timing belt, manufacturer part number 585-5M-15. This belt is used in the AM-14U-CS and AM-14U-8W as one of the two belts to connect an eight wheel drive.

    Specifications:

    • Number of Teeth: 117
    • Pitch Length: 23.03 inches (585 mm)
    • Width: 15mm
    • Tooth profile: 5mm pitch HTD
    • Kevlar reinforced
    • Weight: 0.1

    Timing Belt, Gates HTD, 15mm wide, 85T, 425-5M-15

    #am-2703
    $32.00
    (En stock)

    This is a Gates HTD timing belt, manufacturer part number 425-5M-15
     

    Timing Belt, 120 Tooth, Gates 5mm HTD, 15mm wide

    #am-2704
    $29.52
    (En stock)

    Product Overview: 

    This is a Gates HTD timing belt, manufacturer part number 600-5M-15 

    Usage: 
    Axle Locations for AM14U Variations

    Specifications:

    • Number of Teeth: 120
    • Pitch Length: 23.62 inches (600 mm)
    • Width: 15mm
    • Tooth profile: 5mm pitch HTD
    • Kevlar reinforced
    • Weight: 0.1 pounds

    Timing Belt, 107 Tooth, Gates 5mm HTD, 15mm wide

    #am-2705
    $21.53
    (En stock)

    Product Overview:
    This is a Gates HTD timing belt, manufacturer part number 535-5M-15

    Usage: 
    Axle Locations for AM14U Variations

    Specifications:

    • Number of Teeth: 107
    • Pitch Length: 21.06 inches ( 535 mm)
    • Width: 15mm
    • Tooth profile: 5mm pitch HTD
    • Kevlar reinforced
    • Weight: 0.06 pounds

    Timing Belt, 151 Tooth, Gates 5mm HTD, 15mm wide

    #am-2706
    $24.60
    (En stock)

    This is a Gates HTD timing belt, manufacturer part number 755-5M-15 

    Usage:

    • Axle Locations for AM14U Variations (.pdf) 


    Specifications:

    • Number of Teeth: 151
    • Pitch Length: 29.72 in. ( 755 mm)
    • Width: 15mm
    • Tooth profile: 5mm pitch HTD
    • Kevlar reinforced: Yes
    • Weight: pounds

    42 Tooth Pulley Extension

    #am-2813
    $6.15
    (En stock)

    If you need to increase the width of our 42 Tooth pulley, here is the solution! This pulley extension mates with existing pulley halves (am-2234). This pulley extension can be used in a variety of settings, such as a wider conveyor belt, multiple belt output, and much more by stacking multiple extenders back-to-back between our standard pulley halves.

    Specifications:

    • Pitch diameter: 2.632 inch
    • Outside diameter: 2.59 inch (at outer tooth edge)
    • Width: 15mm
    • Bore: 0.95 inch, with bearing pocket of 1.124 inch diameter x 0.25 inch deep
    • Bolt Pattern: 0.20 inch diameter holes, evenly spaced on a 1.875 inch diameter bolt circle
    • Material: Black Polycarbonate
    • Fits belt types: 5mm pitch HTD timing belt, 15mm wide
    • Weight: 0.082 pounds

    30 Tooth Pulley for 5mm HTD Belts

    #am-3265
    $23.06
    (En stock)

    This 30 tooth pulley has a 5/16" bore and can be used with 5mm HTD belts. 

    Specifications:

    • Bore: 5/16"
    • Pitch: 5mm