Panier

filtres

Menu personnel

préférences

Rechercher

PrécédentMXP Extender Cable

SuivantPWM cable Set - TJC8 3 pin,...

Powerpole 45 Extension Cable, 14AWG, 50cm

Soyez le premier a tester ce produit

The Powerpole Extension Cable is 50cm long and 14AWG wire gauge to handle heavier loads.

# Pièce: 70021

$8.95

Disponibilité: 986 en stock

Quantité:

Commentaires

Écrivez votre propre commentaire

Le produit peut être examinée que après l'achat
Seul les utilisateurs enregistrés peuvent écrire une critique

Titre du commentaire:

texte du commentaire:

Notation:

Mal
Excellent

A également acheté

12 AWG Bonded Cable PP45 Powerpole to Bare Wire

#am-2590

$10.00

(20 En stock)

This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches.

Specifications:

Weight: pounds
Length: Approximately 24 inches
Connector Type: Anderson PowerPole PP45
Gauge: 12 bonded

Anderson PowerPole to JST VH

#am-3732

$5.39

(En stock)

Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

Connections:

JST VH
Anderson Power Pole

Servo Extension Cable

#70188

$6.90

(2894 En stock)

· 450mm Length

· 3 position

· TJC8 MH-FC on one end

· TJC8 FH-MC on the other end

· Twisted cable

· Colors: White, Red, Black (red in middle)

· 24AWG Guage

Motor Mount Plate

#76140

$9.02

(847 En stock)

The Motor Mount Plate is used with the Maverick 12V DC Gear Motor (Part# 75001) to attach it inside the anyone of the U Channels 76010 to 76018. This is an example of a chassis with 4 motors mounted inside the U-Channel using a Motor Mounting Plate.

Step File

432mm Low Profile U-Channel

#76025

$18.04

(618 En stock)

The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

Specifications:

Material: 6061-T6 Aluminum
Thickness - 3mm
Height - 14mm
Width - 48mm
Length - 432mm
Hole pattern - 9
Step File

Servo Arm Extended

#76150

$8.32

(En stock)

The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

Specifcations:

Spline: 25 Tooth, 3.8mm deep
Length: 56mm
Width: 14mm
Height: 7.8mm
Material: 6061-T6 Aluminum
Step File

XT30 (MH-FC) to Tamiya (MH-FC) Cable

#70179

$5.54

30 Tooth Bevel Gear x 1-to-1 Set (2 pack)

#76219-2

$31.99

(606 En stock)

Used to change motor to axle motion 90 degrees. This can be used in between the U-channel.

Specifications:

Material: Steel
Number of teeth: 30
Set of 2 for 1-1 drives
Step File

Maverick 12V DC Gear Motor w/Encoder

#75001

$39.00

(617 En stock)

Our improved and stronger 12-volt DC motor with 100 rpm and 708 oz-in. of torque. The motor features a built-in, high-resolution Hall effect encoder for precise motor control and comes with an encoder cable.

A 61:1 gearbox comes standard.

Motor Specs
Function	Min	Nom	Max
Input Voltage	—	12VDC	—
Gear Ratio	—	1:61	—
No Load RPM	88	100	112
No Load Current	—	600mA	—
Rated Speed	68	80	92
Rated Current	—	—	2.2A
Rated Torque	—	139oz-in	—
Stall Current	—	—	11A
Stall Torque	708oz-in	—	—
Direction	—	CW	—
Encoder Voltage	4	—	5
Encoder Current	—	6mA	—
Encoder CPR	—	6	—

Output Counts per Revolution of Output Shaft (cpr) 1,464 pulses

This motor is not FTC Compeition Legal

Linear Motion Slide Unit 8mm (2 pack)

#72063

$18.04

(0 En stock)

This linear motion closed type slide unit has an 8 mm inside diameter. The slide unit, designed to carry a component, has a housing with a flat mounting face and four tapped bolt holes, and circle clips at each end to retain the ball bushing. Ball in the cage loop to run a smooth ball guide surface to ensure even if high-speed operation, low noise. Used with WSR Linear Motion Shaft - 8mm(D) x 496mm(L)

Features:

Closed type bushing block and ball bushing insert for use in linear motion applications
Four-bolt aluminum alloy bushing block for a lightweight ready-to-mount installation
Synthetic resin retainer plate for accurate ball guidance and low noise
Four rows of recirculating balls inside the ball bushing for smooth running
Integral lip seals to retain lubricant and protect against contamination

Les clients ayant acheté cet article ont également acheté

12 AWG Bonded Cable PP45 Powerpole to Bare Wire

#am-2590

$10.00

(20 En stock)

Weight: pounds
Length: Approximately 24 inches
Connector Type: Anderson PowerPole PP45
Gauge: 12 bonded

Anderson PowerPole to JST VH

#am-3732

$5.39

(En stock)

Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

Connections:

JST VH
Anderson Power Pole

Servo Extension Cable

#70188

$6.90

(2894 En stock)

· 450mm Length

· 3 position

· TJC8 MH-FC on one end

· TJC8 FH-MC on the other end

· Twisted cable

· Colors: White, Red, Black (red in middle)

· 24AWG Guage

Motor Mount Plate

#76140

$9.02

(847 En stock)

Step File

432mm Low Profile U-Channel

#76025

$18.04

(618 En stock)

Specifications:

Material: 6061-T6 Aluminum
Thickness - 3mm
Height - 14mm
Width - 48mm
Length - 432mm
Hole pattern - 9
Step File

Servo Arm Extended

#76150

$8.32

(En stock)

The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

Specifcations:

Spline: 25 Tooth, 3.8mm deep
Length: 56mm
Width: 14mm
Height: 7.8mm
Material: 6061-T6 Aluminum
Step File

Produits connexes

WorldSkills Mobile Robotics Collection Shanghai 2022

#70201

$3888.04

(En stock)

The WorldSkills Mobile Robotics Collection – Shanghai 2022 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Featuring the Studica VMX Robotics Controller for WorldSkills, the Titan Quad Motor Controller and Servo Power Block. This comprehensive Collection also includes electronics, accessories, motors, servos, mounts, U-Channel, mounting plates, flat brackets, irregular brackets, and flat beams. You'll also find gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. Includes Everything You Need (Over 1500 components).

Download brochure and BOM

WorldSkills Mobile Robotics Junior Collection

#70301

$3262.95

(0 En stock)

The WorldSkills Mobile Robotics Junior Collection by Studica is the authorized collection for the WorldSkills Asia Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including controller, electronics, motors, structure, gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs.

VMX Cable Pack

#70160

$24.99

(946 En stock)

Includes:

4 JST-GH to 4 Pin Dupont Cables (connects a VMX-pi GH signal connector to an external sensor or device).
1 battery adapter cable (connects a VMX-pi power connector to an external battery supply).
1 Wallwart cable (cable allows you to connect a VMX-pi to an external 12VDC Wallwart power supply).

USB Cable, Type A to Type C, Blue, 1M

#70186

$8.32

(67 En stock)

USB Cable, Type A to Type C, Blue, 1 Meter, male to male

Titan Cable Pack

#70162

$9.71

(404 En stock)

The Titan Cable Pack contains three cables. A 60cm CAN Wire for connecting the Titan Motor Controller to a CAN 2.0B capable device and two (idk the 50cm JST-VH to JST-VH cables for connecting 12VDC power to other devices such as the VMX or Servo Power Block.

2 - JST-VH to JST-VH cable
- 50cm
1 - CAN Wire
- 60cm

PWM cable Set - TJC8 3 pin, 22AWG, F-F - 12 pcs

#71011

$22.21

(1164 En stock)

This set of 12 pieces includes,

2 x 20cm 22AWG Cables with Dupont TJC8 2.54mm 3 pin, female to female connectors
2 x 40cm 22AWG Cables with Dupont TJC8 2.54mm 3 pin, female to female connectors
2 x 60cm 22AWG Cables with Dupont TJC8 2.54mm 3 pin, female to female connectors
6 x 3pin Dupont male to male connectors

Dupont Single Pin, 4 wire, female to female cable, 22AWG (2 pack)

#71014

$6.93

(691 En stock)

Use the Dupont Single Pin - 4 wire - female to female cable with the Ultrasonic Distance Sensor

Specifications:

Dupont Single Pin
4 wire
female to female cable
Length: 50cm
Gauge: 22AWG

Titan Quad Motor Controller

#70152

Demander un devis

The Titan Quad Motor Controller is a powerful, 4-channel CAN-based motor controller with a built-in fuse-box (for DC motors up to 20A).

Features:

4 x Hardware encoder ports – one for each motor
2 limit switch ports for each motor
Fuse box to set manual current limits
2x Power extension ports to power other 12VDC devices. I.E.
- VMX Robotics Controller
- Servo Power Module
Built in LED Controller
6A power supply for LED’s
i2c communication port to control LED Controller
USB ports are updated to USB-C to better support todays cable standards
Step File

Maverick 12V DC Gear Motor w/Encoder

#75001

$39.00

(617 En stock)

A 61:1 gearbox comes standard.

Motor Specs
Function	Min	Nom	Max
Input Voltage	—	12VDC	—
Gear Ratio	—	1:61	—
No Load RPM	88	100	112
No Load Current	—	600mA	—
Rated Speed	68	80	92
Rated Current	—	—	2.2A
Rated Torque	—	139oz-in	—
Stall Current	—	—	11A
Stall Torque	708oz-in	—	—
Direction	—	CW	—
Encoder Voltage	4	—	5
Encoder Current	—	6mA	—
Encoder CPR	—	6	—

Output Counts per Revolution of Output Shaft (cpr) 1,464 pulses

This motor is not FTC Compeition Legal