Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    roboRIO Power Sauro Connector CTF020V8

    Sauro CTF020V8 connector, to be used as the power connector with  the roboRIO

     

    # Pièce: am-2076
    $5.00
    Vous ne pouvez pas acheter cet article pour ces pays - United States
    Disponibilité: 43 en stock

    Specifications

    • Connecting Tech: Female Sauro
    • Mount Style: Locking Screw Flanges
    • Pitch: 3.5 mm (0.138 in.)
    • Poles: 2
    • Size: 0.955 x 0.44 x 0.605 in.
    • Weight: 0.01 lbs
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent

    Specifications

    • Connecting Tech: Female Sauro
    • Mount Style: Locking Screw Flanges
    • Pitch: 3.5 mm (0.138 in.)
    • Poles: 2
    • Size: 0.955 x 0.44 x 0.605 in.
    • Weight: 0.01 lbs
    Les clients ayant acheté cet article ont également acheté

    10-32 Nylock Nut

    #am-1042
    $0.08
    (En stock)

    This item can only be purchased in multiples of 25

     

    Specifications: 

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: #10-32
    • Thickness: 0.249"
    • Thread: Fine
    • Thread Size: 32
    • Type: Nylon Insert Lock Nut
    • Wrench Size: 3/8"

    6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

    #am-0805
    $5.50
    (256 En stock)

    This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

     

    Specifications

    • Gauge: 06 AWG
    • Hole Size For Stud: 0.25 in.
    • Material: Copper
    • Overall Length: 2.03 in.
    • Tongue Width: 0.48 in.
    • Weight: 0.01 lbs
    • Wire Strip Length: 1.18 in.

    10-32 x 0.75 in. Socket Head Cap Screw - Min 25

    #am-1047
    $0.29
    (En stock)

    Specifications:

     

    • Material: Steel
    • Coating: Zinc Plated
    • Thread: 10-32
    • Length: 3/4"
    • Head: Socket Head Cap Screw

    2" Compliant Wheel, 1/2 inch Hex, 60 Durometer Black

    #am-3462_black
    $8.00

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

    1/2" Churro Tube 24.25" +/- 0.125" (am-2974)

    #am-2974
    $12.00
    (0 En stock)

    Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket. 

    The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.

    Specifications:

    • Material: 6005A Aluminum
    • Inside diameter: 0.231 in.
    • Outside width: 0.495 in. Hex, across flats
    • Length: Selectable Above
    • Weight: 0.16 lbs/ft

    Split Collar Clamp 1/2 in. Hex HD

    #am-1526
    $5.50
    (186 En stock)

    This new custom designed collar clamp has been designed specifically with FIRST Robotics Competition teams in mind. This product is Out of Stock until Mid March