Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Robotique

    Robotique

    Voir comme Grille Lister
    Trier par
    Affichage par page

    0.850 inch long, 0.75 od, 0.380 id, Spacer

    #am-1307
    $2.90
    (19 En stock)

    0.75" x 0.85", nylon, 0.75" od, 0.38" id, 0.85" thick, white

    Specifications:

    • Material: White Nylon Plastic
    • Inside Diameter: 0.38 inch
    • Outside Diameter: 0.75 inch
    • Thickness: 0.85 inch
    • Weight: 0.0014 pounds

    0.875"Bearing Plate (am-3721)

    #am-3721
    $9.95
    (9 En stock)

    This bearing plate is a great way to mount a 0.875 in. OD (FR6) bearing into thin or weak material that otherwise could not tolerate or support a press-fit.

    Specifications:

    • Material: 5052 Aluminum
    • Bore: Press fit for FR6 bearing
    • Thickness: 0.125 in.
    • Bolt Pattern: 4x clearance for #10-32 on 2.00 in. circle
    • Length: 1.875 in.
    • Width: 1.875 in.
    • Weight: 0.032 Pounds

    040.5-RP Bimba Air Cylinder, spring extend w/ nut (am-0591)

    #am-0591
    $49.00

    Bimba Air Cylinder, Spring extended with appropriate nut.

    Specifications:

    • Manufacturer: Bimba Inc.
    • Type: Single Acting - Spring Extend (shaft is out in normal position)
    • Bore: 3/4"
    • Stroke: 1/2"
    • Pivot Type: Nose mount and Rear mount
    • force to overcome spring: 6 pounds
    • Threaded Rod End: 1/4-28
    • Port Size: 1/8" NPT
    • Threaded Nose Size: 5/8-18 (5/8-18 nut included)
    • Weight: 0.244 lbs

    1 in. 8 mm to 1/2 in. Hex Shaft Adapter

    #am-0588_long
    $16.91
    (En stock)

    This adapter converts an 8 mm keyed shaft to 1/2 in. hex. The keyway is 2 mm wide. This allows you to adapt the output of a motor or gearbox like the CIM Motor (am-0255) to any of our hubs or wheels with a 1/2 in. hex bore. You'll need a 2 mm machine key (am-1121) to complete the assembly and transmit torque from the motor. 

     

    This adapter is no longer available in the 0.75 in. length.

     

    Specifications

    • Bore: 8 mm Round
    • Keyway Width: 2 mm
    • Length: 0.5 in., 1 in.
    • Material: Steel
    • Weight: 0.03 lbs
    • Width: 0.497 - 0.499 in.

    1 in. Tee Gusset

    #am-4158
    $5.00
    (En stock)

    We are pleased to offer these new gussets that are suitable for 1" based building systems. These thoughtfully designed gussets are made from 1/8" thick 6061-T6 aluminum, which is a much stronger material than other 0.09" 5052 gussets. All of these framing gussets feature a 1" linear hole pattern, with holes suitable for either #10 screws or 3/16" rivets.

     

    On all of the angle gussets, a generous radius was used on the inside corner for maximum strength. The various angle gussets, along with the quad and tee gusset are used together to create structures and sub-assemblies for your robot. Our bearing and Sport gussets are perfect building blocks to create a massive variety of mechanisms and assemblies to suit your needs.

     

    Specifications

    • Hole Pattern: Plates feature 0.20 in. Holes on a 1 in. Center to Center Spacing
    • Material: 6061-T6 Aluminum
    • Thickness: 0.125 in

     

     

    1 x 1 Peanut Extrusion - 11.25 inch long

    #am-3395
    $10.00
    (En stock)

    Peanut Extrusion is the 1"x1" installment of our easy-to-use structure system. The profile of this extrusion looks like a peanut, and has two holes sized for 1/4-20 thread-forming screws. The added mid-spans are positioned to flank a pair of bolts that self thread into an adjoining piece pf Peanut Extrusion. These spans prevent the extrusion from getting crushed by over-tightening. Enjoy the ease of creating rigid corner joints without gussets, with a closed profile that prevents dust and debris build up. Whether you are making a table in your shop or a strong frame for a robot, this extrusion is the one for you!

     

    Walnut Extrusion is the 2"x1" iteration of the Peanut profile.

     

    Specifications

    • Height: 1.0 in.
    • Hole Size: Sized for 1/4-20 Thread-Forming Screw
    • Length: Selectable Above (+/- 1")
    • Material: 6063-T6 Aluminum
    • Wall Thickness: 0.050 in.
    • Weight Per Foot: 0.325 Pounds
    • Width: 1.0 in.

     

    Documents

    CAD File(s)

    am-3090-1 One Foot Peanut Extrusion.STEP

    Layout Print(s)

    am-3090 Peanut Extrusion.PDF

    1 x 1 Peanut Extrusion, 36" Silver (am-3090-3)

    #am-3090-3
    $29.00

    Peanut Extrusion is the 1"x1" installment of our easy-to-use structure system. The profile of this extrusion looks like a peanut, and has two holes sized for 1/4-20 thread-forming screws. The added mid-spans are positioned to flank a pair of bolts that self thread into an adjoining piece pf Peanut Extrusion. These spans prevent the extrusion from getting crushed by over-tightening. Enjoy the ease of creating rigid corner joints without gussets, with a closed profile that prevents dust and debris build up. Whether you are making a table in your shop or a strong frame for a robot, this extrusion is the one for you!

     

    Walnut Extrusion is the 2"x1" iteration of the Peanut profile.

     

    Specifications

    • Height: 1.0 in.
    • Hole Size: Sized for 1/4-20 Thread-Forming Screw
    • Length: Selectable Above (+/- 1")
    • Material: 6063-T6 Aluminum
    • Wall Thickness: 0.050 in.
    • Weight Per Foot: 0.325 Pounds
    • Width: 1.0 in.

     

    Documents

    CAD File(s)

    am-3090-1 One Foot Peanut Extrusion.STEP

    1 X 1 Peanut Extrusion, 72" Silver (am-3090-6)

    #am-3090-6
    $59.00
    (0 En stock)

    Peanut Extrusion is the 1"x1" installment of our easy-to-use structure system. The profile of this extrusion looks like a peanut, and has two holes sized for 1/4-20 thread-forming screws. The added mid-spans are positioned to flank a pair of bolts that self thread into an adjoining piece pf Peanut Extrusion. These spans prevent the extrusion from getting crushed by over-tightening. Enjoy the ease of creating rigid corner joints without gussets, with a closed profile that prevents dust and debris build up. Whether you are making a table in your shop or a strong frame for a robot, this extrusion is the one for you!

     

    Walnut Extrusion is the 2"x1" iteration of the Peanut profile.

     

    Specifications

    • Height: 1.0 in.
    • Hole Size: Sized for 1/4-20 Thread-Forming Screw
    • Length: Selectable Above (+/- 1")
    • Material: 6063-T6 Aluminum
    • Wall Thickness: 0.050 in.
    • Weight Per Foot: 0.325 Pounds
    • Width: 1.0 in.

     

    Documents

    CAD File(s)

    am-3090-1 One Foot Peanut Extrusion.STEP

    Layout Print(s)

    am-3090 Peanut Extrusion.PDF

    1" Wide Black 3 Ply Neoprene Rubber Tread - 10 Foot QTY

    #TTB-0048
    $52.77
    (7 En stock)

    1 inch wide, 10 foot long length of black 3 ply neoprene rubber tread. This tread is the same as 5994K1 but is already cut to a convenient 1 inch width. Nominal thickness is .30 inches. Weight of a spool is 1.13 lbs

    1.125" OD, 0.629" ID, 0.128" Thick, Nylon Spacer

    #am-1358
    $0.77
    (En stock)

    Specifications:

    • Material: Nylon
    • Inside Diameter: 0.629"
    • Outside Diameter: 1.125"
    • Thickness: 0.128"

    1.5 Links for Chain #35

    #am-4182_35
    $3.00
    (En stock)

    Do you need an odd number of chain links? Tired of dealing with cotter pins in old school "half links"?  Love using the DarkSoul or ARC chain tool for everything? These are the links for you!

     

    These links add one and a half links to a run of chain making for easier cleaner alternative to half links. Use a chain splicing tool or two master links to install them. No more lost matches from a failed half link!

     

    Specifications

    • Chain Size: #25, #35
    • Material: Steel
    • Pitch: 0.25 in., 0.375 in.
    • Style: Roller Chain

    1.8" x 3/8" Spacer

    #am-2242
    $4.61
    (En stock)

    This is a 1.8 inch long brass spacer which fits over a 3/8" shaft.

    Specifications:

    • Length: 1.80"
    • Inside diameter: 0.379"
    • Outside diameter: 0.437"
    • Material: Brass
    • Weight: 0.022 Lb

    1.875x1/8 Steel Dowel Pin

    #am-1356
    $0.54
    (En stock)

    Steel dowel pin, used in AndyMark Plastic 4" DuraOmni Wheels as roller axles. 

    Specifications:

    • Length: 1.875 inch
    • Diameter: 0.125 inch
    • Material: Hardened steel
    • Weight: 0.008 pounds

    1/2 inch id Bearing, Shielded (R8ZZ)

    #am-0181
    $4.25

    Specifications:

    • Inside diameter: 0.500 inch
    • Outside diameter: 1.125 inch
    • Overall Thickness: 0.312 inch
    • Weight: 0.046 pounds

    1/2 inch id Flanged, Shielded Ball Bearing (FR8ZZ)

    #am-0030
    $4.25
    (En stock)

    Product Overview: 

    • 1/2" id, shielded, flanged ball bearing 


    Specifications:

    • Inside Diameter: 0.500 inch
    • Outside Diameter: 1.125 inch
    • Flange Thickness: 0.062 inch
    • Overall Thickness: 0.312 inch
    • Weight: 0.052 pounds
    • Material: Steel

    1/2" Churro, Purple 3 FT /- 0.125" (am-3101-3_Purple)

    #AM-3101-3_PURPLE
    $25.00
    (0 En stock)

    Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket. 

    The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.

    Specifications:

    • Material: 6005A Aluminum
    • Inside diameter: 0.231 in.
    • Outside width: 0.495 in. Hex, across flats
    • Length: Selectable Above
    • Weight: 0.16 lbs/ft

    Robotique

    Sous-catégories