This bushing fits into any 8mm hole such as those seen on tubing in the S3 Ecosystem. The bushing supports a 6mm shaft allowing you to use our precision 6mm D Shafts with the S3 Ecosystem and other systems. 

Specifications:

• Inner Diameter: 6mm (0.24 in.)
• Outer Diammeter: 8mm (0.31 in.)
• Overall Length: 6mm (0.24 in.)

Specifications:

• Inside Diameter: 0.315" (8mm)
• Outside Diameter: 0.748" (19mm)
• Width: 0.236" (6mm)
• Weight: 0.016 Lbs

Specifications:

• ID: 6mm
• OD: 12mm
• Flange OD: 13.6mm
• Thickness: 4mm
• Flange Thickness: 0.8mm

Product Overview: 

• This is the Ball Bearing used to hold the Output Shaft of the CIM-Sim Gearbox.

Specifications:

• Weight: 0.02 Lb
• Inside Diameter: 8mm
• Outside Diameter: 19mm
• Overall Thickness: 6mm
• Flange Diameter: 22mm
• Flange Thickness: 1.5mm

This nub can be used to support the end of a 6mm D shaft, and be bolted to an S3 rail, a Ninja sprocket, pulley or wheel. With this you could create an idler sprocket, free spinning wheel or wheels on dead axles. This Nub also works as a bearing mount for a spinning axle.

Specifications:

• Length: 0.63 in. (16 mm)
• Height: 0.63 in. (16 mm)
• Depth: 0.394 in.
• Material: 6061-T6 Aluminum
• Bore: 0.236 in. (6 mm)
• Weight: 0.009 Pounds

Product Overview: 

• Ball bearing, 1-1/4 bore, with double shields, ABEC-1

This robust bearing is used on the Swerve & Steer Module.

Specifications:

• Inside Diameter: 1.250 inch
• Outside Diameter: 2.250 inches
• Thickness: 0.500 inch
• Material: Steel
• Shields: yes, steel
• Maximum Load: 12,000 pounds, dynamic
• ABEC-1
• Weight: 0.26

This is the bronze bushing (and spacer!) used in the Worm Gearbox (am-0917).

Specifications:

• Weight: 0.013 pounds
• Material: Bronze
• Inside Diameter: 5/16"
• Outside Diameter: 0.5"
• Length: 0.5"

The AndyMark 2x1 Elevator System is designed to be a robust, easy to use solution for building reliable linear motion systems. This easy-to-build bearing kit solves one of the most difficult parts of building these mechanisms by providing precision cut sheet metal brackets to support the rollers and bearings for a smooth single-stage linear system. Use this in conjunction with your existing stockpile of 2" x 1" aluminum tubing and gussets to quickly create linear motion systems of a variety of sizes.

Note: This product is specifically designed for 2"x1" (outside dimensions) aluminum box tubing. It is not compatible with other sizes of aluminum tubing. Sold as an unassembled kit.

Individual Components within Bundle: 

• 4 - Large Bearing Plate for 2x1 Elevator (am-3794a)
• 4 - Small Bearing Plate for 2x1 Elevator (am-3793a)
• 8 - 3/4" OD, .382" ID, 1" long Aluminum Spacer (am-1450)
• 8 - 5/8" OD, .382" ID, 3/4" long Aluminum Spacer (am-1451)
• 8 - Nylon Roller for 2x1 Elevator (am-1449)
• 8 - 3/8-16 x 3" Hex Bolt (am-1452)
• 8 - 3/8-16 Nylon Insert Nut (am-1054)
• 48 - 3/16" Steel Rivet, 1/8-1/4" Grip (am-1226)
• 8 - 1614ZZ Bearing (am-0209)
• 8 - 1/4" Washer (am-1027)
• 4 - 10-32 Nylon Insert Nut (am-1042)
• 4 - 10-32 x 2.75" SHCS (am-1397)
• 4 - .192" ID, .250" OD, 2.14" long Brass Tube (am-0602)

Product Overview: 

• 3/16" id Ball Bearing 

Specifications:

• Inner diameter: 0.1875 inch
• Outer diameter: 0.500 inch
• Thickness: 0.156 inch
• Weight: 0.016 pounds

3/8" id shielded ball bearing 

Double Shielded Common industry part number: 1614ZZ 

Specifications:

• Inside Diameter: 0.375 inch
• Outside Diameter: 1.125 inch
• Width: 0.375 inch
• Weight: 0.064 pounds

3/8" id shielded, flanged ball bearing 

Specifications:

• Inside Diameter: 0.375 inch
• Outside Diameter: 0.875 inch
• Flange Thickness: 0.062 inch
• Overall Thickness: 0.280 inch
• Weight: 0.026 pounds
• Material: Steel

3/8" id shielded ABEC1 ball bearing

Please note: this bearing has been updated (as of Nov. 16th, 2011). Previously, the thickness of the inner race was wider, and this was a more rough-rolling bearing.

Specifications: 

• inside diameter: 0.375 inch
• outside diameter: 1.125 inch
• overall thickness: 0.312 inch
• flange diameter: 1.250 inch
• flange thickness: 0.062 inch
• Weight: 0.07 pound

Product Overview: 

• 3/8" ID, ball bearing 

Specifications:

• Outside diameter: 0.875"
• Overall thickness: 0.218"
• Onside diameter: 0.375"
• Weight: 0.024 Lb

Specifications:

• Outside Diameter: 0.875"
• Flange Thickness: 0.062"
• Overall Thickness: 0.218"
• Inside Diameter: 0.375"
• Weight: 0.024 Lbs

This bearing plate is a great way to mount a 0.875 in. OD (FR6) bearing into thin or weak material that otherwise could not tolerate or support a press-fit.

Specifications:

• Material: 5052 Aluminum
• Bore: Press fit for FR6 bearing
• Thickness: 0.125 in.
• Bolt Pattern: 4x clearance for #10-32 on 2.00 in. circle
• Length: 1.875 in.
• Width: 1.875 in.
• Weight: 0.032 Pounds

Specifications:

• Inside diameter: 0.500 inch
• Outside diameter: 1.125 inch
• Overall Thickness: 0.312 inch
• Weight: 0.046 pounds