Fermer
Menu
toutes catégories
    (0) Soumission
    Vous avez pas d'articles dans votre panier.
    (0) Produits
    Vous avez pas d'articles dans votre panier.
    Menu
    Panier
    filtres
    préférences
    Rechercher
    PrécédentServo Pack
    SuivantServo Standard Front

    Servo Power Block

    Soyez le premier a tester ce produit

    The Studica Servo Power Module is a 6V, 60W power injector that enables the use of high-power RC servos. The Servo Power Module passes through input signals unaltered while providing up to 60W of total output power across all eight channels.  The input and output channels accept standard 3-wire, 0.1” pitch, servo/PWM cables. 

    Features,

    • Built in DC-DC converter
    • Over-current shutdown
    • ESD protection

    Specifications,

    • Nominal Input Voltage: 12V
    • Operational Voltage Range: 6.0V
    • Number of Channels: 8
    • Max Current for All Channels Combined: 10A
    • Total Continuous Power: 60W
    • Size: 70mm x 45mm x 16mm
    • Step File

     

    # Pièce: 75006
    $51.38
    Disponibilité: 1529 en stock
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent

    A également acheté

    Photo de roboRIO 2.0

    roboRIO 2.0

    #am-3000a
    $725.00
    (0 En stock)

    OUT OF STOCK UNTIL END OF MAY 2024

     

    NOTE: This product is not included in any Sales or Discounts.

     

    The NI roboRIO 2.0 is new for the 2022 FIRST Robotics Competition. The most up to date information, and technical specifics, will be published by NI when they become available. For more roboRIO support for FIRST Robotics Competition teams, visit ni.com/frc

    This device is designed specifically with FIRST in mind. The announcement of the roboRIO 2.0 on the FIRST Robotics Competition Blog, discusses all the new features to expect.

    Tetrix Max PRIZM On/Off Switch kit

    Tetrix Max PRIZM On/Off Switch kit

    #43169
    $36.00

    Controls the power from the battery pack to the PRIZM Robotics Controller with the flip of a switch.

    Les clients ayant acheté cet article ont également acheté
    Photo de roboRIO 2.0

    roboRIO 2.0

    #am-3000a
    $725.00
    (0 En stock)

    OUT OF STOCK UNTIL END OF MAY 2024

     

    NOTE: This product is not included in any Sales or Discounts.

     

    The NI roboRIO 2.0 is new for the 2022 FIRST Robotics Competition. The most up to date information, and technical specifics, will be published by NI when they become available. For more roboRIO support for FIRST Robotics Competition teams, visit ni.com/frc

    This device is designed specifically with FIRST in mind. The announcement of the roboRIO 2.0 on the FIRST Robotics Competition Blog, discusses all the new features to expect.

    Tetrix Max PRIZM On/Off Switch kit

    Tetrix Max PRIZM On/Off Switch kit

    #43169
    $36.00

    Controls the power from the battery pack to the PRIZM Robotics Controller with the flip of a switch.

    Produits connexes
    Photo de WorldSkills Mobile Robotics Collection Shanghai 2022

    WorldSkills Mobile Robotics Collection Shanghai 2022

    #70201
    $3888.04
    (En stock)

    The WorldSkills Mobile Robotics Collection – Shanghai 2022 by Studica is the authorized collection for the WorldSkills Mobile Robotics Competition. Featuring the Studica VMX Robotics Controller for WorldSkills, the Titan Quad Motor Controller and Servo Power Block. This comprehensive Collection also includes electronics, accessories, motors, servos, mounts, U-Channel, mounting plates, flat brackets, irregular brackets, and flat beams. You'll also find gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs. Includes Everything You Need (Over 1500 components).

    Download brochure and BOM

    WorldSkills Mobile Robotics Junior Collection 2021

    WorldSkills Mobile Robotics Junior Collection

    #70301
    $3262.95
    (0 En stock)

    The WorldSkills Mobile Robotics Junior Collection by Studica is the authorized collection for the WorldSkills Asia Mobile Robotics Junior Competition. This comprehensive Collection includes over 1,400 items including controller, electronics, motors, structure, gears, sprockets, pulleys, belts, axles, slides, rack & pinion, wheels, bushings, bearings, coupling, collars, spacers, screws, nuts, and standoffs.

    Photo de Servo Pack

    Servo Pack

    #70254
    $470.90
    (0 En stock)

    Includes,

    • 8 - Multi-Mode Smart Servo  75002
    • 1 - Smart Robot Servo Programmer  75003
    • 1 - 6V DC AA Battery Holder w/TJC8 Female, 22 AWG  75004
    • 1 - Servo Power Block  75006
    • 4 - Servo Standard Front Mount  76144
    • 4 - Servo Mount Flat Plate  76145
    • 4 - Servo Mount Offset Plate  76146
    • 8 - Servo Horn 25T  76148
    • 8 - 6mm D-Shaft Servo Hub 25T  76149
    Photo de Multi-Mode Smart Servo

    Multi-Mode Smart Servo

    #75002
    $33.32
    (2085 En stock)

    The Studica Multi-Mode Smart Servo features all-steel gears and large amounts of torque. This angular programmable Servo can fill a variety of roles on your robot or project. In standard mode, it operates on a +/- 150-degree range. Using the Studica Smart Robot Servo Programmer (sold separately) the Multi-mode Smart Servo can be configured to run in continuous, standard, and custom angular mode. In continuous rotation mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller.  

    Specifications:

    Type:                             Metal Brush Motor
    Horn Gear Spline:       25T (5.9mm)
    Size:                               40mm x 20.1mm x 38.3mm
    Weight:                          65g
    Maximum Speed:        62RPM at 6V
    Stall Torque:                 20kg.cm at 6V
    Voltage:                         6-7 4V
    Cable:                             22AWG, 75cm

    Photo de Smart Robot Servo Programmer

    Smart Robot Servo Programmer

    #75003
    $18.04
    (2057 En stock)

    The Studica Smart Robot Servo Programmer is used for programming the Studica Multi-Model Smart Servo Motor and for testing other standard Servos. Use it to program the Studica Servo to switch between continuous mode, standard mode, or any custom angular mode.  

    Specifications:

    • Requires 6 Volt battery pack with TJC8 connector or use the Studica 6V DC Battery Holder.
    • Programming setting modes
      • Standard
      • Continuous
      • Angular
    Photo de 6V DC Battery Holder, for Smart Robotics Servo Programmer

    6V DC Battery Holder, for Smart Robotics Servo Programmer

    #75004
    $6.93
    (3801 En stock)

    Use it to power the Studica Smart Robot Servo Programmer or any other device requiring 6V output and a TJC8 connector. 

    Specifications:

    • 6V Output
    • On/Off Power switch
    • TJC8 connector
    • Uses 4 x 1.5V AA Batteries (not included)
    Photo de Servo Standard Front

    Servo Standard Front

    #76144
    $6.24
    (1218 En stock)

    The Servo Standard Front Mounting Bracket is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Photo de Servo Mount Flat Plate

    Servo Mount Flat Plate

    #76145
    $9.02
    (3030 En stock)

    The Servo Mount Flat Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Photo de Servo Mount Offset Plate

    Servo Mount Offset Plate

    #76146
    $9.71
    (1125 En stock)

    The Servo Mount Offset Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Photo de Servo Horn 25T

    Servo Horn 25T

    #76148
    $5.54
    (876 En stock)

    The Servo Horn 25T is made of anodized 6061-T6 Aluminum and is used with the Multi-Mode Smart Servo (75002) and the Studica building structure.

     

     

     

    Photo de 6mm Servo Hub 25T

    6mm Servo Hub 25T

    #76149
    $8.32
    (572 En stock)

    The 6mm Servo Hub 25T is made of anodized 6061-T6 Aluminum and is used to connect a servo motor to a D-Shaft axel.

     

    WorldSkills Mobile Robotics VMX/Titan Workshop Kit

    Mobile Robotics VMX/Titan Workshop Kit

    #70203
    Demander un devis

    The WorldSkills Mobile Robotics VMX/Titan Workshop Kit is used in the classroom for teaching, testing and doing research in mobile robotics. It includes each the essential components and is referenced in the WorldSkills Mobile Robotics Shanghai 2022 training material.

    Photo de VMX/Titan Plus Upgrade Kit

    VMX/Titan Plus Upgrade Kit

    #74003
    Demander un devis

    This kit may be used with older structure and most sensors.  It includes everything required to connect to the collection and sensors. The only other electronic item required may be the SR-Pro Camera.

    Includes,

    Informations
    Service Clients
    Mon compte
    Informations de contact
    Droit d'auteur et copie; 2024 Studica Limited. Tous les droits sont réservés.