Panier

filtres

Menu personnel

préférences

Rechercher

Précédent90mm Toolmaker Vise, Screwl...

SuivantTormach 5 in. (127 mm) CNC ...

SET - 4 in. CNC Vise

Soyez le premier a tester ce produit

A versatile and compact 4 in. CNC Vise that can be mounted upright or on either side.

# Pièce: 35285

Demander un devis

Quantité:

Aperçu
Commentaires

Precision ground cast iron construction
Lockdown design eliminates "jaw lift" of moveable jaw.
3/8-16 UNC tapped holes (x4) accept standard 4 in. jaw plates for inside or outside jaw placement.
5/16 in.-18 UNC tapped hole (x1) located on fixed jaw for attaching a workstop, etc.
Generous clamping slots allow for secure and versatile placement of vise on table
.390 in. (10 mm) keyway slots on bottom face with 10-32 UNF tapped holes (x6). Can be used for vise keys (optional, not included) or for attaching vise to fixture plate, etc.
Includes all necessary clamping hardware for attaching to 1/2 in., 3/8 in., or 10mm T-slots.
Includes bridge clamp for compact side by side mounting of 2 vises.
Includes cast iron vise handle

Écrivez votre propre commentaire

Le produit peut être examinée que après l'achat
Seul les utilisateurs enregistrés peuvent écrire une critique

Titre du commentaire:

texte du commentaire:

Notation:

Mal
Excellent

A également acheté

Shuttle Jog Controller

#30616

$145.00

Maximizes productivity with combination control of feed and positioning on all 4 axes (X, Y, Z, and A)

PathPilot Controller for 15L Lathe and PCNC Mills

#50848

Demander un devis

PathPilot Controller for Tormach PCNC 1100 Mill, PCNC 770 Mill, PCNC 440 Mill and 15L Slant-PRO Lathe.

Required for Tormach 15L Slant-PRO lathe and PCNC 440 Mill
Preloaded with PathPilot^®2.0
Includes all applicable cables
Configurable for either 115 VAC or 230 VAC
Covered by 12 month Tormach Warranty

NOTE: replacement for PN 35286

Controller is NOT compatible with 770M/MX or 1100M/MX Mills, 1300PL Plasma Table.

TTS™ CNC Operator Set with Tormach Tool Assistant

#32284

Demander un devis

Tormach Tooling System CNC Operator's Set with Tool Assistant Set.

PCNC 440 Chip Pan

#51499

Demander un devis

PCNC 440 Chip Pan Kit.

Passive Probe Kit

#32309

Demander un devis

The Passive Probe Kit is an economical probe that quickly and automatically sets work offsets using PathPilot’s integrated probing routines.

PathPilot Software Bootable USB Drive - Recovery Media

#38249-USB

$40.00

Can also be used when hard drive is replaced on controller.

Lyndex TTS™ Adapter Collet: R8

#50568

$61.50

The TTS-R8 Adaptor Collet is an R8 collet with modified length that allows for mounting of all TTS tool holders in R8 taper spindles

PCNC 440 Power Drawbar Kit

#35927

Demander un devis

The Power Drawbar Kit supplies a pneumatic power drawbar that increases productivity and efficiency through push-button tool changes - for use with and without 440 ATC

Clamp Kit for 3/8 in. T-Slots (58 Pcs.)

#35509

Demander un devis

58 Piece Pro Quality Steel Clamp Kit.; Includes assortment of T-nuts, Studs, Strap Clamps, and Flange Nuts.

T-nuts fit standard 3/8" T-slots.
5/16 in.-18 Studs

1100M Printed Manual

#38950

Demander un devis

1100M Printed Owners Manual

Precision ground cast iron construction
Lockdown design eliminates "jaw lift" of moveable jaw.
3/8-16 UNC tapped holes (x4) accept standard 4 in. jaw plates for inside or outside jaw placement.
5/16 in.-18 UNC tapped hole (x1) located on fixed jaw for attaching a workstop, etc.
Generous clamping slots allow for secure and versatile placement of vise on table
.390 in. (10 mm) keyway slots on bottom face with 10-32 UNF tapped holes (x6). Can be used for vise keys (optional, not included) or for attaching vise to fixture plate, etc.
Includes all necessary clamping hardware for attaching to 1/2 in., 3/8 in., or 10mm T-slots.
Includes bridge clamp for compact side by side mounting of 2 vises.
Includes cast iron vise handle