Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    SMC Double Acting Single Rod 3/4 in. Bore Air Cylinders Different Lengths (4 inch)

    These double acting single rod stainless steel cylinders are a solid choice when you want air actuated motion. These cylinders have a strong 0.75 in. thick bore and are available in multiple stroke lengths.

    # Pièce: am-2034_4
    $48,00
    2 en stock

    Specifications

    • Bore: 3/4 in.
    • Manufacturer: SMC
    • Manufacturer Part #: NCME075-[stroke length]
    • Nose Thread: 5/8-18
    • Pivot Point: Rear
    • Port(s): 1/8 in. NPT
    • Retracted Overall Length: 5.1 in., 6.5 in., 8.5 in., 10.5 in., 11.5 in.
    • Rod Thread: 1/4-28
    • Stroke: 0.5 in., 2 in., 4 in., 6 in., 7 in.

    Documents

    CAD File(s)

    am-2034_2.STEP

    am-2034_4.STEP

    am-2034_6.STEP

    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    *
    *
    • Mal
    • Excellent

    Specifications

    • Bore: 3/4 in.
    • Manufacturer: SMC
    • Manufacturer Part #: NCME075-[stroke length]
    • Nose Thread: 5/8-18
    • Pivot Point: Rear
    • Port(s): 1/8 in. NPT
    • Retracted Overall Length: 5.1 in., 6.5 in., 8.5 in., 10.5 in., 11.5 in.
    • Rod Thread: 1/4-28
    • Stroke: 0.5 in., 2 in., 4 in., 6 in., 7 in.

    Documents

    CAD File(s)

    am-2034_2.STEP

    am-2034_4.STEP

    am-2034_6.STEP

    Les clients ayant acheté cet article ont également acheté

    42mm Hinge with Bearings

    #76312
    $10,55
    ( 3874 En stock)

    Made from aluminum and anodized in blue, the Studica 42mm Hinge with Bearings connects to the Studica structure hole pattern such as the channel, plates, and beams. The holes are 3.2mm diameter to use with the M3 screws. 

    • Material: 6063 Aluminum
    • Length: 42mm
    • Width: 30.88mm
    • Thickness: 3.5mm
    • Hole diameter: 3.2MM
    • Step file

    2" Compliant Wheel, 3/8 inch Hex, 35 Durometer Green

    #am-3571_green
    $8,00 $10,42
    (En stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

    Don't see what you need?

    6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

    #am-0805
    $5,50
    ( 259 En stock)

    This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

     

    Specifications

    • Gauge: 06 AWG
    • Hole Size For Stud: 0.25 in.
    • Material: Copper
    • Overall Length: 2.03 in.
    • Tongue Width: 0.48 in.
    • Weight: 0.01 lbs
    • Wire Strip Length: 1.18 in.

    2" Compliant Wheel, 3/8 inch Hex, 50 Durometer Blue

    #am-3571_blue
    $8,00 $10,42
    (En stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

     

    574 ml Air Reservoir with Push Connect Fittings

    #am-2649
    $30,00
    ( 19 En stock)

    This is a plastic air tank accumulator holding 574 ml, manufactured by Clippard.

    This black plastic tank has been improved over the last white plastic design from Clippard. Each end now has molded in plastic push-in fittings. These eliminate the need to have metal fittings to be screwed in to the tank, and omits the uncertainty of over-tightening a fitting into the tank.

    Specifications:

    • Manufacturer: Clippard
    • Weight: 0.64 lbs
    • Capacity: 574 ml (35 cu. inch)
    • Ports: Two 1/4" od tube push-in fittings
    • Maximum pressure: 125 psig
    • Temperature rating: 35 to 100 F
    • Length: 12.25"
    • Diameter: 2.5" (@ main tank), 2.75" max


    A mounting bracket is available to order (am-2008), but is not included when ordering just this item.

    Note: If you have received a faulty air tank (damaged push to connect fittings) please contact Scott Lamb of Clippard Technical Sales at (513)-521-4445 (ext 1213).

    Fitting, pneumatic, straight Y, 1/4 press-in

    #am-2184
    $4,50 $5,21
    (En stock)

    This is a push-to-connect "Y" fitting.

    Specifications:

    • Weight: 0.02 lbs
    • Width: 1.515 in
    • Height: 0.56 in
    • Depth: 1.31 in
    • Material: plastic body material
    • Ports: 1/4" push-to-connect fitting
    • Pressure range: 0-150 psi

    Fitting, pneumatic, Y, 1/4 press-in (two), 1/8" NPT (one)

    #am-2183
    $4,30 $4,86
    (En stock)

    This is a pneumatic Y connection with two 1/4" push-to-connect fittings and one 1/8" NPT thread end.

    Specifications:

    • Weight: 0.03 lbs
    • Width: 1.025 in
    • Height: 0.525 in
    • Length: 1.825 in
    • Material: >Brass with nickel plating, with plastic body material
    • Hex width: 0.5 in
    • Ports: 1/4" push-to-connect fitting
    • Pressure range: 0-150 psi

    Pneumatic fitting, elbow, 1/4 inch tube, press-in, 1/8 inch NPT male

    #am-2039
    $3,85 $4,35
    ( 53 En stock)

    This is a pneumatic push-to-connect male elbow fitting. The port is a 1/8" NPT male thread, and 1/4" diameter tube can be pressed in to the push-to-connect fitting. 

    Specifications:

    • Weight: 0.03 pound
    • Width: 1.05"
    • Height: 1.14"
    • Depth: 0.54"
    • Material: Brass with nickel plating, with plastic body material
    • Hex width: 1/2 inch
    • Ports: 1/8" NPT male with pre-applied PTFE thread sealant
    • Pressure range: 0-150 psi