Pack of spare Machine Keys. Included Hardware:
am-1121 Specifications:
am-1043 Specifications:
Specifications:
This item can only be purchased in multiples of 25
This is a thread rolling screw that is 0.75 in. long.
This item can only be purchased in multiples of 10
This retainer clip is used to hold objects (such as gears) in place on shafts. Example: This product can be used to hold a gear onto a CIM motor shaft. Specification:
E-Clip ring for 1/2" shaft Specifications:
Each hub now has a "flower" pattern that fits and keys into our 42T 5 mm HTD Pulley, which means you are no longer constrained to our legacy 500EX Hex Hub for compatibility with this pulley. Every hub still maintains a closed-profile hole for maximum strength. Every shaft hub has been designed with bearing bosses on both sides that have been sized appropriately for the mating bearings that would pair with the bore through the hub, which means you can run each hub right against a bearing with no need for extra spacers. All of these hubs are also made from 7075-T6 aluminum, which is much stronger than the previously used 6061-T6, 6005, and 6105 alloys from our older designs. Where possible, the shoulder on shaft hubs was reduced to 7/8" in diameter for an easier fit with our molded plastic wheels, while still maintaining a precise 1.125" diameter boss for locating in wheels, sprockets, gears, and more.
The holes are evenly spaced on a 1.875 in. circle and 0.201 inches in diameter. That's a perfect size for #10 bolts!
Learn how to attach these hubs to AndyMark wheels by watching this video!
3/8" id shielded, flanged ball bearing Specifications:
This retaining ring can be used on 6 mm D shafts to hold components in place. This is most useful on the shaft of NeveRest gearmotors & gearboxes. Product Overview:
This external retaining ring is used to fit into a groove on a 3/4" shaft. External Rings fit into the groove of a shaft. The portion of the ring that protrudes from the groove holds the assembly in place. Example: Within AndyMark products, this fastener is used to hold the FlexHub into gears and sprockets with 3/4" hex bore. Specification:
3/16" x 3/4" spring pin. Used in the WormBox gearbox. Specifications: