Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Structure

    Structure

    Voir comme Grille Lister
    Trier par
    Affichage par page

    96mm Adjustable Flat Bracket (2 pack)

    #76083-2
    $7.63
    (494 En stock)

    The Studica Adjustable Angle Flat Bracket is perfect for connecting two channels pieces together at various angles. It is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 48mm
    • Length - 96mm
    • Step File

    Climber in a Box Brace Upgrade Kits - 1.5 in. Extrusion (1 Stage)

    #am-4682
    $24.75
    (4 En stock)

    This kit is a tried and tested addition to the Climber in a Box. It is used as a secondary bracing point between the outermost piece of extrusion and the robot that the Climber is attached to. It also has mounting holes to accept our Peanut Extrusion, which can be used to brace two Climber arms together across a robot.

     

    Items Included in am-4682:

     

    • 2 - Cross Support Plate (am-4655) 
    • 5 - 0.192 in. ID 0.375 in. OD 1.5 in. Long Aluminum Spacer (am-1599)
    • 5 - 10-32 x 2 in. Socket Head Cap Screw (am-1049)
    • 5 - 10-32 Nylock Jam Nut (am-1063)

     

    Items Included in am-4683:

     

    • 2 - Cross Support Plate (am-4655) 
    • 5 - 0.192 in. ID 0.375 in. OD 2 in. Long Aluminum Spacer (am-1600)
    • 5 - 10-32 x 2.5 in. Socket Head Cap Screw (am-1024)
    • 5 - 10-32 Nylock Jam Nut (am-1063)

    End Piece Plate (2 pack)

    #76143-2
    $13.88
    (766 En stock)

    The Studica End Piece Plate is commonly fastened to the inside end of the U Channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

     

    Flats Pack

    #70253
    $173.64
    (1 En stock)

    Includes,

    • 2 - 432mm x 40mm Flat Bracket  76058
    • 2 - 384mm x 40mm Flat Bracket  76059
    • 2 - 336mm x 40mm Flat Bracket  76060
    • 1 - 288mm x 40mm Flat Bracket  76061-2
    • 2 - 240mm x 40mm Flat Bracket  76062
    • 1 - 192mm x 40mm Flat Bracket  76063-2
    • 1 - 144mm x 40mm Flat Bracket  76064-2
    • 1 - 96mm x 40mm Flat Bracket  76065-2
    • 1 - 192mm x 96mm Flat Bracket (2 pack)  76066-2

    Inside L Bracket (2 pack)

    #76089-2
    $8.32
    (1040 En stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the Inside L Bracket is 42mm x 45mm and is used inside the U Channel or Low profile channel.As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    Inside U Bracket (2 pack)

    #76086-2
    $8.32
    (236 En stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the Inside U Bracket is 42mm x 45mm and is used inside the U Channel or Low profile channel.. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    Irregular Bracket Pack

    #70262
    $262.54
    (0 En stock)

    Includes,

    • 3 - 120 Degree Bracket (2 pack)  76080-2
    • 2 - 90 Degree Bracket (2 pack)  76081-2
    • 2 - 135 Degree Bracket (2 pack)  76082-2
    • 2 - 96mm Adjustable Flat Bracket (2 pack)  76083-2
    • 1 - T Bracket (2 pack)  76084-2
    • 1 - X Bracket (2 pack)  76085-2
    • 4 - Inside U Bracket (2 pack)  76086-2
    • 4 - L Bracket (2 pack)  76087-2
    • 4 - Inside L Bracket (2 pack)  76089-2

    L Bracket (2 pack)

    #76087-2
    $8.32
    (609 En stock)

    Made from 3mm thick heavy 6061-T6 Aluminum, the L Bracket is 48mm x 48mm and is used outside the U Channel or Low profile channel. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    Motor Mount Clamp Kit

    #76141
    $15.27
    (67 En stock)

    Use the Motor Mount Clamp kit when fastening motors on body and attaching kit to channel and other structure.

     

     

    Motor Mount Plate

    #76140
    $9.02
    (1037 En stock)

    The Motor Mount Plate is used with the Maverick 12V DC Gear Motor  (Part# 75001) to attach it inside the anyone of the U Channels 76010 to 76018. This is an example of a chassis with 4 motors mounted inside the U-Channel using a Motor Mounting Plate.

     

     

     

     

     

    Motor Mount Plate Leaf

    #76139
    $6.93
    (849 En stock)

    Robot Base Plate

    #74001
    $54.16
    (692 En stock)

    The Studica Robot Base Plate is 3mm thick and as with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 288mm
    • Length - 336mm
    • Step File

    Servo Mount Flat Plate

    #76145
    $9.02
    (129 En stock)

    The Servo Mount Flat Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Servo Mount Offset Plate

    #76146
    $9.71
    (154 En stock)

    The Servo Mount Offset Plate is one option to mount the Multi-Mode Smart Servo (75002) to the Studica building structure.

     

     

    Shaft and Spacer Bundle

    #70256
    $62.51
    (En stock)

    Includes,

    • 2 x 76162-2 - 6mm x 432mm D-Shaft (2 pack)
    • 2 x 76161-6 - 6mm x 96mm D-Shaft (6 pack)
    • 2 x 76160-6 - 6mm x 70mm D-Shaft (6 pack)
    • 1 x 76159-6 - 6mm x 35mm D-Shaft (6 pack)
    • 1 x 76303-2 - Coupling 6mm ID D-Shaft, 12mm OD (2 pack)
    • 2 x 76308-6 - Shaft Spacer Plastic 6mm ID x 10mm OD x 20mm L (6 pack)
    • 3 x 76304-6 - Collar 6mm ID D-Shaft, 12mm OD (6 pack)
    • 2 x 76306-24 - Shaft Spacer Plastic 6mm ID x 10mm OD x 2mm L (24 pack)
    • 2 x 76305-24 - Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (24 pack)

    Shaft Spacer 1mm (24 pack)

    #76305-24
    $8.32
    (1005 En stock)

    This 1mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm shaft. Mix and match various spacer lengths.

    SPECIFICATIONS

    • Material: Nylon
    • OD: 10mm
    • ID: 6mm
    • Length: 1mm
    • Step File