Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Structure

    Structure

    Voir comme Grille Lister
    Trier par
    Affichage par page

    Shaft Spacer 20mm (6 pack)

    #76308-6
    $6.93
    (541 En stock)

    This 1mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm shaft. Mix and match various spacer lengths.

    SPECIFICATIONS

    • Material: Nylon
    • OD: 10mm
    • ID: 6mm
    • Length: 20mm
    • Step File

    Shaft Spacer 2mn (24 pack)

    #76306-24
    $9.02
    (2411 En stock)

    This 1mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm shaft. Mix and match various spacer lengths.

    SPECIFICATIONS

    • Material: Nylon
    • OD: 10mm
    • ID: 6mm
    • Length: 2mm
    • Step File

    Shaft Spacer 5mm (12 pack)

    #76307-12
    $5.54
    (526 En stock)

    This 1mm Spacer is used to space gears, sprockets, wheels, and other parts along a 6mm shaft. Mix and match various spacer lengths.

    SPECIFICATIONS

    • Material: Nylon
    • OD: 10mm
    • ID: 6mm
    • Length: 5mm
    • Step File

    T Bracket (2 pack)

    #76084-2
    $13.88
    (840 En stock)

    The T Bracket is perfect for connecting two or three channels together. Each side is 48mm wide to fit on the U Channel, low profile channel or other brackets. The overall size is 144mm x 96mm

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

     

    X Bracket (2 pack)

    #76085-2
    $19.43
    (881 En stock)

    The X Bracket is perfect for connecting four channels pieces together. Each of the 4 sections is 48mm wide and the overall dimmension is 144mm x 144mm.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Thickness - 3mm
    • Step File

    1-1 Motor Kit, 5mm Hex Shaft

    #76289
    $11.10
    (486 En stock)

    Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).

    Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Step File

    2 x 1x 0.063 Aluminum Box Extrusion, 3ft

    #am-3214-3
    $24.00
    (8 En stock)

    These aluminum box extrusions are robust and lightweight solutions for custom robot frames, superstructures and mechanism construction. Made to all of your favorite English sizes, the classic 2x1 thin wall tubing is now joined by its thicker-walled counterpart. We have also introduced two thicknesses of 1x1 sizes that teams know and love to build their medium-sized mechanisms. 



    For smaller mechanisms, we recommend using our 5/8 square box tube that is also compatible with the S3 line of brackets and gussets.

     

    Available Sizes:

    • 2 x 1 x 1/16 in. (0.063 in.) 6061-T6 alloy
    • 2 x 1 x 1/8 in. (0.125 in.) 6061-T6 alloy
    • 1 x 1 x 1/16 in. (0.063 in.)6061-T6 alloy
    • 1 x 1 x 1/8 in. (0.125 in.)6061-T6 alloy
    • 5/8 x 5/8 x 1/16 in. (0.063 in.) 6061-T6 alloy
    • All lengths are (+/- 1in)

    Be sure to all check out our Gussets as they work wonderfully with all of these wonderful extrusions.

    384mm L Beam (2 pack)

    #76111-2
    $10.40
    (973 En stock)

    The Studica L-Beam is available in 9 different lengths from 48mm to 432mm. It is strong while light weight. It can be easily cut to your own custom size. The hole pattern matches the hole patterns in the Studica U-Channel, Low Profile U-Channel, and the various plates.

    Specifcations,

    • Material:  6061-T6 Aluminum
    • Length: 384mm
    • Width: 14mm
    • Height: 14mm
    • Thickness: 3mm
    • Hole Diameter: 3.5mm
    • Weight: 0.068kg
    • Step File

    384mm Square Beam

    #76101
    $13.88
    (594 En stock)

    The Studica Square Beam is 8mm by 8mm. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material -  Anodized 6061-T6 Aluminum
    • Holes - 3.5mm diameter spaced 8mm apart
    • Length - 384mm
    • Step File

     

    384mm x 40m Flat Bracket

    #76059
    $14.57
    (580 En stock)

    The Studica Flat Bracket is a very strong  3mm x 40mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 40mm
    • Length - 384mm
    • Hole Pattern - 8
    • Step File

     

    432mm Flat Beam

    #76040
    $6.93
    (791 En stock)

    The Studica Flat Beam is 3mm thick and 8mm wide. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Width - 8mm
    • Length - 432mm
    • Step File

     

    432mm Low Profile U-Channel

    #76025
    $18.04
    (618 En stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 432mm
    • Hole pattern - 9
    • Step File

     

    432mm T-Slot Extrusion

    #76120
    $9.71
    (250 En stock)

    The Studica T-Slot Extrusion is available in 10 different lengths from 48mm to 1000mm. It is strong while light weight. It can be easily cut to your own custom size. It has a 14mm through hole that will fit the Studica 6mmID x 14mmOD Flanged Bearing or Bronze Bushing. It uses the M3 T-Slot Nut Hammer Head Series 20.  It also has four M3 threaded holes on each end. Use it as structure on infinite applications.

    Specifcations,

    • Material:  6061-T6 Aluminum
    • Length: 432mm
    • Weight: 1.142kg
    • Step File

    Orbital Motor Mount

    #76138
    $8.90
    (810 En stock)
    • 42.0mm*42.0mm*11.3mm thick
    • 16*M3*8.0mm thread
    • M3 pass through holes
    • SHCS sit flush
    • Material - AL6061-T6

    1-1 Motor Kit, 6mm D Shaft

    #76290
    $11.10
    (482 En stock)

    Sometimes you have the need for increased RPM. This 1:1 motor kit can be used with the Studica Maverick or any FTC legal motor such as the Neverest Classic (6600 RPM) or the REV HD Hex motor (6000RPM). The kit includes a faceplate which supports the Studica Robotics building platform. The shaft is press-fit onto the motor's shaft. It is recommended that the shaft be supported by a bearing (we recommend the 76302 for the Studica building system).

    Whether you are constructing an intake, designing a shooter, or creating some other high-speed design, this 1:1 option allow you to get the full motor RPM output.

    Specifications:

    • Material - Anodized 6061-T6 Aluminum
    • Step File

    336mm L Beam (2 pack)

    #76112-2
    $9.71
    (975 En stock)

    The Studica L-Beam is available in 9 different lengths from 48mm to 432mm. It is strong while light weight. It can be easily cut to your own custom size. The hole pattern matches the hole patterns in the Studica U-Channel, Low Profile U-Channel, and the various plates.

    Specifcations,

    • Material:  6061-T6 Aluminum
    • Length: 336mm
    • Width: 14mm
    • Height: 14mm
    • Thickness: 3mm
    • Hole Diameter: 3.5mm
    • Weight: 0.06kg
    • Step File