The Motor Power Cable features Anderson Powerpole Connectors and attaches the 12-volt DC motor to their power source. The cable is 18" in length and is used to connect the motors to the TETRIX PRIZM Robotics Controller (43000).

Not just for golf, these balls are used in activities in the TETRIX® PRIME Builder’s Guide. These soft foam replacements might come in handy!  Quantity: pkg of 4

The Sensor Extension Cable extends the length available for creating connections from the TETRIX PRIZM Robotics Controller to a sensor. Each cable is 30 cm long.

1 1/2" Screw Pack help connect components of your robot design. Requires hex keys, sold separately, to tighten and loosen the screws.

• Material: stainless steel

TETRIX MAX Quarter-Scale HS-785HB Winch Servo Motor with Horn is a super-duty servo with advanced features. Incorporated into this servo are heavy-duty Karbonite gears and integrated circuitry for accurate positioning over a 1,260-degree range (3.5 rotations). Delivering a maximum torque of 183 oz-inches, this unique servo offers greater rotational range control and power to TETRIX robot builds. Attach this quarter-scale servo to your TETRIX robot with ease with one of our Quarter-Scale Servo Mounting Brackets.

Each servo includes one nylon dual-wind pulley and one TETRIX Aluminum Servo Horn.

The 10-cell, 12-volt AA rechargeable pack is small and lightweight yet still packs a powerful punch. This 2,000 mAh NiMH pack features a built-in 15-amp replaceable fuse for safety.

Use this 10-cell, 12-volt rechargeable pack to bring long-lasting power to TETRIX^® motors and electronics. This 3,000 mAh NiMH pack features a built-in, 20-amp replaceable fuse for safety.

(THIS BATTERY IS FTC LEGAL)

Specifications

• Quantity: pkg of 6
• Length: 100 mm
• Diameter: 4.7 mm
• Weight: 81 g per pack; 12.7 g per axle
• Size: 4.7 mm x 100 mm
• Material: 303/304 stainless steel
• Shaft: D-shaft

This motor controller connects to the PRIZM expansion port, enabling users to control up to two additional 12-volt DC motors. Up to four motor controllers can be connected to the PRIZM expansion port. There are two H-bridge outputs to control the speed and direction of two DC motors and two quadrature encoder input ports. Additional power and expansion ports support daisy-chain configurations.

Supported programming languages include Arduino and EV3. The motor controller can be connected to the LEGO EV3 Brick. Software blocks can be downloaded from the Resources tab below.

TETRIX MAX Gear Pack includes all three sizes of the TETRIX Gears in this one pack.

• Four 40-tooth gears
• Two 80-tooth gears
• Two 120-tooth gears

Specs

• Quantity: 8 gears
• Outside Diameter: 33.75, 65.5, and 97.3 mm
• Inside Diameter: 8.0 mm
• Thickness: 6.3 mm
• Material: 7005 Aluminum

TETRIX MAX Lego Connector Pack was designed to enable LEGO Technic elements to be connected to theTetrix Max; metal building system.

• Quantity: pkg of 12
• Material: ABS plastic

Offers a replacement for a lost or damaged Line Finder Sensor Mount.

TETRIX MAX Quarter-Scale HS-755HB Servo Motor with Horn offers a whopping 183 oz-inches of torque, 180-degree rotation, and superior strength and performance. Perfect for robot builds that require more power and durability. The servo features Karbonite gears that offer incredible toughness and strength. Attach this Quarter-Scale Servo to your TETRIX robot with ease with one of our new Quarter-Scale Servo Mounting Brackets.

Each servo includes one TETRIX Aluminum Servo Horn.

TETRIX MAX Quarter-Scale Pivot Arm with Bearing Pack creates strong, durable pivot joints, while minimizing side load on the servo shaft. Compatible only with TETRIX Quarter-Scale Servo Frame Mounting Bracket (39383); includes a 3 mm Bearing Pack.

• Material: 7005 Aluminum

TETRIX MAX Quarter-Scale Servo Frame offers you flexibility in positioning a servo. It holds the servo and can be attached in several ways. Easy to use. For use with a quarter-scale servo; includes two 16 mm round aluminum mounting standoffs.

• Material: 7005 Aluminum

Offers a replacement for a lost or damaged Ultrasonic Sensor Mount.