Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Timing Belt, 48 Tooth, 5mm HTD, 9mm wide

    Specifications:

    • Pitch: 5 mm
    • Length:
    • Width: 9 mm
    • Number of Teeth: 48
    • Weight: 0.05 Pounds
    # Pièce: am-3662
    $10.76
    Disponibilité: En stock

     

    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent

     

    Les clients ayant acheté cet article ont également acheté

    2" Stealth Wheel, 1/2" Hex Bore, 50A Durometer

    #am-3155_Blue
    $9.00
    (87 En stock)

    The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.

    Product Usage:
    Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product.

    Specifications

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
    • Diameter: 2 in., 4 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
    • Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU, Polycarbonate
    • Weight: 0.23lb, 0.1lb
    • Width: 1 in.

    Documents

    Layout Print(s)

    am-3664 2in 5mm Hex Stealth Wheel REV4.PDF

    am-3156 2IN 8mm Stealth Wheel REV3.PDF

    am-3436 2in 375Hex Stealth Wheel REV3.PDF

    am-3155 2in 500Hex Stealth Wheel REV3.PDF

    am-3665 4in 5mm Hex Stealth Wheel REV3.PDF

    am-2648 4IN 8mm Stealth Wheel REV5.PDF

    am-3435 4in 375Hex Stealth Wheel REV3.PDF

    am-2647 4in 500Hex Stealth Wheel REV3.PDF

    CAD File(s)

    am-3664 2in 5mm Hex Bore Stealth Wheel REV3.STEP

    am-3156 2IN 8mm Stealth Wheel.STEP

    am-3436 2IN 375Hex Stealth Wheel REV2.STEP

    am-3155 2IN 500Hex Stealth Wheel REV2.STEP

    am-3665 4IN 5mm Hex Stealth Wheel REV2.STEP

    am-2647 4inWheel 500 Hex REV2.STEP

    am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP

    am-2648 4inWheel 8mm Hub REV2.STEP

    24T HTD Pulley, 1/2" Hex Bore

    #am-3403
    $13.85
    (En stock)

    Specifications:

    • Flange diameter: 1.654"
    • Outside Diameter: 1.459"
    • Pitch Diameter: 1.504"
    • Width: 0.276"
    • Bore: 0.50" Hex
    • Material: Black Polycarbonate
    • Fits belt types: 5mm pitch HTD timing belt, 9mm wide
    • Weight: 0.0025 Pounds

    1.125"Bearing Plate (am-3722)

    #am-3722
    $9.95
    (25 En stock)

    This bearing plate is a great way to mount 1.125 in. OD (FR8) into thin or weak material that otherwise could not tolerate or support a press-fit.

     

    Specifications:

    • Material: 5052 Aluminum
    • Bore: Press fit for FR8 bearing
    • Thickness: 0.125 in.
    • Bolt Pattern: 4x clearance for #10-32 on 2.00" circle
    • Length: 1.875 in.
    • Width: 1.875 in.
    • Weight: 0.0275 in.

    Timing Belt, 93 Tooth, 5mm HTD, 9mm wide

    #am-3378
    $21.00
    (En stock)

    Specifications:

    • Number of Teeth: 93
    • Pitch Length: 18.31 inches (465mm)
    • Pitch: 5mm
    • Width: 9mm
    • Tooth profile: 5mm pitch HTD

    Sushi Roller Intake Wheels - 1/2 in. Hex, 60a (Black)

    #am-4541_black
    $6.00
    (47 En stock)

    The Sushi Roller Intake Wheels are an excellent choice for robot intakes, internal conveyors, feeder mechanisms, or anywhere you need a durable, compact and grippy roller. These rollers are made with a robust polycarbonate hex bore hub, so no external hub is necessary - just slide them onto a hex shaft, constrain them axially and you are good to go. Available in a range of durometers for a wide variety of applications, these cute little rollers are great for getting a grip on things!

     

    Specifications

    • Bore: 0.5 in. Hex, 5 mm Hex, 0.375 in. Hex
    • Core Material: Polycarbonate
    • Diameter: 1 in.
    • Durometer: 35A (Green), 40A (Orange), 50A (Blue), 60A (Black)
    • Tread Material: TPU
    • Weight: 0.022 lbs
    • Width: 1 in.

    Constant Force Spring Kit

    #TTB-ELEV-SPRING
    $69.44
    (5 En stock)

    This kit provides enough hardware to mount your constant force spring to your elevator structure. Includes a 16.5 pound 48" inch travel constant force spring, 2 solid aluminum brackets and assorted hardware.