Ultra Flexible Wire -12 AWG

CAD File(s)

Guide(s)

4" Compliant Wheel, 1/2" Hex Bore, 40A Durometer, Orange

#am-3480_orange

$14.50

(17 En stock)

Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

Specifications

Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
Diameter: 4 in.
Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
Material: TPU, ⠀Polycarbonate
Maximum RPM: 3000-9000
Weight: 0.228 - 0.269 Lbs
Width: 1 in.

Documents

Layout Print(s)

CAD File(s)

Guide(s)

am-3664 2in 5mm Hex Stealth Wheel REV4.PDF

0.5 inch Hex Aluminum Spacer Stock 12 inch length

#am-3896-1

$14.00

(22 En stock)

Sourcing the right stock for the right job can be hard sometimes. No longer is that true for 1/2 inch hex spacer stock! Offered in precisely machined 1.2 inch sections as well as one three and six foot lengths (plus or minus 0.125".) This rigid stock can be cut and used in any assembly you can think of. Gearbox design? Yup. Drive train design? Yep. Manipulator design? Yep! Why stop a spacers, you can even use it to couple 2 shafts together and transfer crazy amounts of torque or cover it in grippy material and use it as a game piece roller.

Fitting, Cross, Brass, 1/8" NPT, 3 F, 1 M

#am-2380

$6.15

(En stock)

This is a Nickel plated Brass cross union with three (3) Female connections with 1/8 NPT thread and one (1) male connection at 1/8 NPT.

This part can replace heavier brass manifold pieces and makes your pneumatic system lighter.

Specifications:

Weight: 0.08 lbs
Width: 1.65 in
Height: 0.51 in
Depth: 1.58 in
Material: Brass with nickel plating
Ports: 3 Female 1/8 NPT, 1 male 1/8 NPT
Pressure rating: 230 psi

Fitting, Y, Brass, 1/8" NPT, 2 F, 1 M

#am-2186

$6.15

(En stock)

This is a Nickel plated Brass "Y" union with two (2) Female connections with 1/8 NPT thread and one (1) male connection at 1/8 NPT.

Specifications:

Weight: 0.05 lbs
Width: 1.54 in
Height: 0.51 in
Depth: 1.09 in
Material: Brass with nickel plating
Ports: 2 Female 1/8 NPT, 1 male 1/8 NPT
Pressure range: 0-250 psi

6 Gauge Compression Lug Connector 1/4 Stud Hole BURNDY #: YAZV6CTC14FX

#am-0805

$5.50

(255 En stock)

This is a heavy-duty compression lug from BURNDY for 06 AWG wire. This compression log can be easily crimped with the Cable Lug Crimping Tool.

Specifications

Gauge: 06 AWG
Hole Size For Stud: 0.25 in.
Material: Copper
Overall Length: 2.03 in.
Tongue Width: 0.48 in.
Weight: 0.01 lbs
Wire Strip Length: 1.18 in.

2 in. Stealth Wheel, 1/2 in. Hex Bore, 60A Durometer

#am-3155_blk

$9.00

(45 En stock)

The inside black portion of this wheel is made from molded polycarbonate plastic. The outer tread is TPU (Thermoplastic PolyUrethane). This robust but lightweight wheel provides good traction on carpet and soft tiles. Stealth wheels are the perfect drive wheel for smaller (<50 lb.) robots, or for intakes and other auxiliary robot mechanisms. These wheels are available in a variety of bores and durometers. 4 in. Stealth Wheels feature a 6 bolt pattern on a 1.875 in. bolt circle for mounting sprockets, hubs, and gears. Nub Bore Stealth Wheels feature a 4 bolt pattern on a 16 mm bolt circle found in most FIRST Tech Challenge building systems. The lower the durometer the softer the wheel is, this makes it wear away faster, but also makes it more grippy.

Product Usage:
Many thread locking materials are not compatible with polycarbonate and can eat away at the plastic. Be sure to check which adhesives are okay to use with this product.

Specifications

Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
Diameter: 2 in., 4 in.
Durometer: 35A (Green), ⠀40A (Orange), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
Material: TPU, Polycarbonate
Weight: 0.23lb, 0.1lb
Width: 1 in.

Documents

Layout Print(s)

am-3156 2IN 8mm Stealth Wheel REV3.PDF

am-3436 2in 375Hex Stealth Wheel REV3.PDF

am-3155 2in 500Hex Stealth Wheel REV3.PDF

am-3665 4in 5mm Hex Stealth Wheel REV3.PDF

am-2648 4IN 8mm Stealth Wheel REV5.PDF

am-3435 4in 375Hex Stealth Wheel REV3.PDF

am-2647 4in 500Hex Stealth Wheel REV3.PDF

CAD File(s)

am-3664 2in 5mm Hex Bore Stealth Wheel REV3.STEP

am-3156 2IN 8mm Stealth Wheel.STEP

am-3436 2IN 375Hex Stealth Wheel REV2.STEP

am-3155 2IN 500Hex Stealth Wheel REV2.STEP

am-3665 4IN 5mm Hex Stealth Wheel REV2.STEP

am-2647 4inWheel 500 Hex REV2.STEP

am-3435 4in Wheel Integrated Hub 375 HEX with Tread REV2.STEP

am-2648 4inWheel 8mm Hub REV2.STEP

Falcon 500 Spline to 1/2 in. Hex Shaft Adapter

#am-4187

$11.50

(6 En stock)

These adapters are intended to be a high strength solution to adapt the Falcon Spline to any product that has a 1/2 in hex bore. This product includes the correct size washers to retain items along the hex shaft, as well as a thread-patch 8-32 screw to be used in conjunction with spacers included with the Falcon 500 motor to retain motion hardware.

Voltage Regulator Module

#am-2857

$90.00

(2 En stock)

NOTE: This product is not included in any Sales or Discounts.

The Voltage Regulator Module (VRM) is a DC to DC convertor that is capable of both boost and buck voltage regulation. The device features two independent SEPIC (Single Ended Primary-inductor Converter) regulators allowing the input voltage to be above or below the desired output voltage. There are two regulators (one 5V and one 12V) each with two current limiting PTC’s (500mA and 2A). Reverse polarity protection is included.

The VRM has been used in the 2015-2021 FIRST Robotics Competition Kit of Parts. As of Sept 10, 2020 according to FIRST blog these will continue to remain competition legal in future years.

See the overview of the 2021 Controls system

Please contact support at [email protected] for warranty issues or Return Merchandise Authorization (RMA) for this product.

VRM User Guide

Documents

Layout Print(s)

am-2857 VRM.PDF

Les clients ayant acheté cet article ont également acheté

0.192 in. ID 0.375 in OD 1.0 in. Long Aluminum Spacer

#am-3876

$2.75

This spacer is used in the AM14U Family Vertical Battery Mount Kit (am-3964a) But is a great spacer for #10 screws wherever you might need it.

Specifications

Inside Diameter: 0.192 in.
Length: 1 in.
Material: Aluminum
Outside Diameter: 0.375 in.
Wall Thickness: 0.09 in.

4" Compliant Wheel, 1/2" Hex Bore, 35A Durometer, Green

#am-3480_green

$14.50

(43 En stock)

Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

Specifications

Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
Diameter: 4 in.
Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
Material: TPU, ⠀Polycarbonate
Maximum RPM: 3000-9000
Weight: 0.228 - 0.269 Lbs
Width: 1 in.

Documents

Layout Print(s)

CAD File(s)

Guide(s)

4" Compliant Wheel, 1/2" Hex Bore, 40A Durometer, Orange

#am-3480_orange

$14.50

(17 En stock)

Please note maroon wheels are only intended for use in FTC. If more powerful motors are used to drive it the spokes may fail.

Specifications

Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore, 5 mm Hex
Diameter: 4 in.
Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), ⠀60A (Black), ⠀80A (Gray)
Hole Pattern: Qty 4 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
Material: TPU, ⠀Polycarbonate
Maximum RPM: 3000-9000
Weight: 0.228 - 0.269 Lbs
Width: 1 in.

Documents

Layout Print(s)

CAD File(s)

Guide(s)