Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    West Coast Drive Style Bearing Block Kit

    A West Coast style drivetrain can be finicky to create without precision machining capabilities. This Bearing Block Kit makes it much more accessible for teams to create high performance West Coast Drive style platforms with limited fabrication resources. Simply drill a clearance hole for a shaft to pass through your drive rail, pull your chain or belt tight, and clamp it down with the included hardware. Featuring machined pockets to capture 10-32 Nylock Nuts, these blocks can be used and reused without worrying about damaging threads upon installation. Because each block is the same part, you can keep the screw heads pointing to the outside of your robot for easy maintenance. 

     

    This unassembled kit ships with enough hardware to provide significant clamping pressure to help keep your powertrain components tensioned properly, and can withstand upwards of 1500lbs of force along the axis of the tube when properly installed. This means that for most FRC use cases, a team can install these without the need for tensioning devices to keep things aligned.

     

    The AndyMark West Coast Drive Bearing Block Kit is designed to be used with flanged ball bearings with a 1.125" outer race, such as our FR8ZZ-HexHD Bearing.

     

    Wheel Example

     

    The AndyMark West Coast Drive Bearing Block Kit also includes mounting geometry for components that utilize 2" and 1.875" bolt circles, such as motors, gearboxes, sprockets, hubs and gears. This makes this product great for many uses outside of your drivetrain, such as a robust interface to make a rotary arm, or an easy-to-use mounting interface for motors to power your mechanisms. The bearing plate is also 2" wide, making it perfect to keep two 20DP gears (of which the total teeth add up to 80,) meshed together.

     

    Sprocket Example Gearbox and Gears Example

    Items Included

    • 2 - WCD Bearing Block (am-4560)
    • 4 - 10-32 Nylock Nut (am-1042)
    • 4 - 10-32 x 1.5in Socket Head Cap Screw (am-1014)

    Specifications

    • Block Height: 0.45 in.
    • Block Length: 2.88 in.
    • Block Material: Aluminum
    • Block Width: 2.00 in.
    • Weight: 0.33 lbs

     

    Documents

    Layout Print(s)

    am-4576 WCD Bearing Block Kit.pdf

    am-4560 WCD 1.125 Bearing Block REV 2.pdf

    CAD File(s)

    am-4576 WCD Bearing Block Kit.STEP

    am-4560 2x1 WCD 1.125 Bearing Block REV2.STEP

    # Pièce: am-4576
    $40,00
    25 en stock
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    *
    *
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    2" Compliant Wheel, 1/2 inch Hex, 35 Durometer Green

    #am-3462_green
    $8,00 $10,42
    ( 59 En stock)

    Compliant wheels are not intended for moving robots, but moving objects. Compliant wheels give way to allow rigid objects to be manipulated easily. A line of multiple wheels on a driven hex shaft creates a very effective roller that ignores variations in the objects being driven. This makes for high-performance intakes and internal conveyors. The wheels are sized for an interference fit and tend to stay in place on a shaft, though a shaft collar may be used to make absolutely sure the wheels stay clear of other mechanisms or maintain consistent spacing.

     

    The hex bore versions of this wheel are undersized, and are intended to be an interference fit on their respective hex shafts. This interference fit allows for effective torque transfer from the hex shaft to the wheel, as well as allowing the wheel to remain in place along the shaft without the need for spacers or collar clamps:

     

    Compliant Wheel Sizing

     

    Different durometer ratings give each wheel unique characteristics. Green wheels (35A durometer) are the softest and most compliant around objects, while orange (40A), maroon (45A), and blue (50A) wheels are increasingly firm. The increased firmness also allows the latter wheels to carry a higher RPM rating. Check out the downloads tab for a chart showing wheels and their maximum RPM. 

     

     

    Specifications

     

    • Bore: 1/2 in. Hex, 3/8 in. Hex, Nub Bore
    • Diameter: 2 in.
    • Durometer: 35A (Green), ⠀40A (Orange), ⠀45A (Maroon), ⠀50A (Blue), 60A (Black)
    • Hole Pattern: Qty 2 3.5 mm Holes on a 16 mm Circle for 8 mm bore wheels
    • Material: TPU
    • Maximum RPM: 6000 - 9000
    • Weight: 0.035 lb.
    • Width: 0.5 in.

     

    Documents

    Layout Print(s)

    am-3571 2IN 375 Hex Compliant Wheel REV3.PDF

    am-3462 2IN 500Hex Compliant Wheel REV3.PDF

    am-3572 2IN 8mm Compliant Wheel REV4.PDF

    CAD File(s)

    am-3571 2IN 375Hex Compliant Wheel REV2.STEP

    am-3572 2IN 8mm Compliant Wheel REV2.STEP

    am-3462 2IN Molded 500Hex Compliant Wheel REV2.STEP

    Additional File(s)

    2 inch Compliant Wheel Expansion.pdf

    Don't see what you need?

    10-32 x 1.5 in. Socket Head Cap Screw

    #am-1014
    $0,95
    ( 279 En stock)

    Specifications

     

    • Drive: 5/32 in. Hex
    • Finish: Zinc
    • Head: Socket Cap
    • Length: 1.5 in.
    • Material: Steel
    • Thread: 10-32
    • Weight: 0.02 lbs

     

    This item can only be purchased in multiples of 10

    1/4-20 Nylock Nut

    #am-1015
    $0,12
    ( 500 En stock)

    Specifications:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 1/4-20
    • Width across hex: 7/16"

     

    This item can only be purchased in multiples of 25

    1/4-20 x 0.5" BHCS - Min 25

    #am-1039
    $0,50 $0,53
    ( 775 En stock)

    Specifications:

    • Material: Steel
    • Coating: Zinc plated
    • Thread: 1/4-20
    • Length: 1/2"
    • Head: Button Head Cap Screw

    10-32 Nylock Jam Nut

    #am-1063
    $0,11 $0,11
    ( 325 En stock)

    Must be ordered in mulitples of 25

     

      10-32 x 0.375 in. Socket Head Cap Screw

      #am-1359
      $0,30
      ( 250 En stock)

      This item can only be purchased in multiples of 25

       

      Specifications

      • Drive: 5/32 in. Hex
      • Finish: Zinc
      • Head: Socket Cap
      • Length: 0.375 in.
      • Material: Alloy Steel
      • Thread: 10-32 Fine
      • Weight: 0.005 lbs

      Bearing, 1/2 inch Hex Bore, Flanged, (FR8ZZ-HexHD)

      #am-2986
      $9,00 $10,42
      ( 184 En stock)

      This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

      This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.


      Specifications:

      • Inside diameter: 0.500-0.502 inch hex bore
      • Outside diameter: 1.125 inch
      • Flange thickness: 0.062 inch
      • Overall thickness: 0.312 inch
      • Weight: 0.05 pound

      90 Degree Gusset

      #am-3860
      $5,00 $6,08
      ( 40 En stock)

      We are pleased to offer these new gussets that are suitable for 1" based building systems. These thoughtfully designed gussets are made from 1/8" thick 6061-T6 aluminum, which is a much stronger material than other 0.09" 5052 gussets. All of these framing gussets feature a 1" linear hole pattern, with holes suitable for either #10 screws or 3/16" rivets.

       

      On all of the angle gussets, a generous radius was used on the inside corner for maximum strength. The various angle gussets, along with the quad and tee gusset are used together to create structures and sub-assemblies for your robot. Our bearing and Sport gussets are perfect building blocks to create a massive variety of mechanisms and assemblies to suit your needs.

       

      Specifications

      • Hole Pattern: Plates feature 0.20 in. Holes on a 1 in. Center to Center Spacing
      • Material: 6061-T6 Aluminum
      • Thickness: 0.125 in

       

      Documents

      Layout Print(s)

      am-3860 90 Gusset REV2.PDF

      am-4158 1IN Tee Gusset.PDF

      am-4159 1IN Quad Gusset.PDF

      am-4160 1IN 30deg Gusset.PDF

      am-4161 1in 45deg Gusset.PDF

      am-4162 1in 60deg Gusset.PDF

      am-4163 1in 120deg Gusset.PDF

      am-4164 1in 135deg Gusset.PDF

      am-4165 1in 150deg Gusset.PDF

      am-4166 1IN Sport Double Bearing Mount.PDF

      am-4167 1IN 57Sport Side Mount Gusset.PDF

      am-4168 1IN Bearing Side Mount Gusset.PDF

      CAD File(s)

      am-3860 90 Gusset REV2.STEP

      am-4158 1IN Tee Gusset.STEP

      am-4159 1IN Quad Gusset.STEP

      am-4160 1IN 30deg Gusset.STEP

      am-4161 1in 45deg Gusset.STEP

      am-4162 1in 60deg Gusset.STEP

      am-4163 1in 120deg Gusset.STEP

      am-4164 1in 135deg Gusset.STEP

      am-4165 1in 150deg Gusset.STEP

      am-4166 1IN Sport Double Bearing Mount.STEP

      am-4167 1IN 57Sport Side Mount Gusset.STEP

      am-4168 1IN Bearing Side Mount Gusset.STEP