Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Wheel Pack

    Includes,

    • 4 - 100mm Drive Wheel, 50A, 12.5mm wide, 1/2" Inner Hex, Blue  76261
    • 4 - 100mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue  76262
    • 4 - 50mm Drive Wheel, 50A, 25mm wide, 1/2" Inner Hex, Blue  76269
    • 4 - Omni Wheel (100mm, Double Plastic, w/ integrated 6mm Hub)  76260
    • 2 - 6mm x 96mm D-Shaft (6 pack)  76161-6
    • 1 - 6mm x 432mm D-Shaft (2 pack)  76162-2
    • 1 - Bushing Bronze 6mm ID x 8mm OD (12 Pack)  76300-12
    • 1 - Bushing Bronze 6mm ID x 14mm OD (12 Pack)  76301-12
    • 1 - Flange Bearing  6mm ID, 14mm OD, 15mm Flange (12 Pack)  76302-12
    • 3 - 6mm Shaft Hub (4 pack)  76284-4
    • 2 - Collar 6mm ID D-Shaft, 12mm OD (6 pack)  76304-6
    • 1 - Shaft Spacer Plastic 6mm ID x 10mm OD x 1mm L (24 pack)  76305-24
    # Pièce: 70255
    $415.34
    Disponibilité: En stock
    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent
    Les clients ayant acheté cet article ont également acheté

    TETRIX MAX TorqueNADO Motor Gearbox 40:1

    #45423
    $22.23

    The NEW 40:1Tetrix Max; TorqueNADO Motor Gearboxes give more rpm when compared to the 60:1 gearbox included with the TorqueNADO motor. These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.

    Motor Mount Plate

    #76140
    $9.02
    (1005 En stock)

    The Motor Mount Plate is used with the Maverick 12V DC Gear Motor  (Part# 75001) to attach it inside the anyone of the U Channels 76010 to 76018. This is an example of a chassis with 4 motors mounted inside the U-Channel using a Motor Mounting Plate.

     

     

     

     

     

    1/2" Churro, 11.25 in. (am-3398)

    #am-3398
    $8.00
    (En stock)

    Churro is a versatile extruded aluminum hex profile. The outside of this part is a 1/2 in. hex with small concave dimples which act as weight savings. There is an inside hole is sized at 0.2 in. in order to fit 1/4-20 thread forming screws. No tapping or threading is needed, as long as a thread forming screw is used. The outside hex size fits a 1/2 in. wrench or socket. 

    The 3-foot churro, our most popular length and the best value on shipping, is available anodized in red, blue, purple, gold and black to dress up your robot. Anodized finish is hardy and doesn't flake off or add thickness like paint, but it is possible for a scratch to expose the bare metal beneath. Take basic precautions in your shop like watching for sharp tools or overtightening this churro in a vise.

    Specifications:

    • Material: 6005A Aluminum
    • Inside diameter: 0.231 in.
    • Outside width: 0.495 in. Hex, across flats
    • Length: Selectable Above
    • Weight: 0.16 lbs/ft

    TETRIX MAX TorqueNADO Motor Gearbox 20:1

    #45424
    $17.25
    (19 En stock)

    These gearboxes are designed with the same 37 mm diameter as the original 60:1 gearbox, while using the same 6 mm D-shaft and alignment pins, so getting the additional speed you need is a breeze.

    Enhanced Wheel Hub Kit

    #76291
    $9.95
    (1485 En stock)

    Used with Studica Omni and Mecanum wheels for a strong axel hold.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Color: Blue
    • Step File

    Servo Arm Extended

    #76150
    $8.32
    (En stock)

    The Studica Servo Arm Extended can be used with the Multi Mode Servo, Multi Mode Servo 200, or most servos with a 25 Tooth gear.

     

    Specifcations:

    • Spline: 25 Tooth, 3.8mm deep
    • Length: 56mm
    • Width: 14mm
    • Height: 7.8mm
    • Material: 6061-T6 Aluminum
    • Step File