S3, Variable Degree Gusset

This is a Heavy Duty Hex Bearing which outperforms our previous 1/2" Hex Bearings as it has a Heavy Duty Inner Race. This FR8ZZ-HexHD bearing, 1/2" hex bore, flanged, heavy duty inner race, shielded ball bearing, has an inner race that is thicker and stronger than our recent offering of a similar bearing (am-0279). This bearing has more material between the corners of the hex bore and the edge of the race making it stronger and much less likely to crack under high load.

This bearing is guaranteed to have a stronger, thicker race. 100% of these bearings have been quality checked for a smooth fit over 1/2" hex stock here at AndyMark. Many of our long-time customers will recognize this bearing, as it is the same version we sold back in 2008-2011, and we did not have any failures. Now, it is renamed and quality checked for your high load needs - including drive chassis with cantilevered wheels.

Specifications:

• Inside diameter: 0.500-0.502 inch hex bore
• Outside diameter: 1.125 inch
• Flange thickness: 0.062 inch
• Overall thickness: 0.312 inch
• Weight: 0.05 pound

This bracket allows attachment of an air cylinder to extrusion that has a 1 in. wide dimension such as Peanut or 2x1 box tube

Specifications

• Cylinder Mounting Diameter: 0.623 in.
• Material: 5052 Aluminum

This cable can be used in many ways, a power cable for the Gorgon Flex, or from a Speed Controller to a CIM motor. One end connectors are crimped with PowerPole Connectors, two crimps and a black and red housing are shipped with this cable. Tip-to-tip length is approximately 24 inches. 

Specifications:

• Weight: pounds
• Length: Approximately 24 inches
• Connector Type: Anderson PowerPole PP45
• Gauge: 12 bonded

Specifications:

• Flange diameter: 1.654"
• Outside Diameter: 1.459"
• Pitch Diameter: 1.504"
• Width: 0.276"
• Bore: 0.50" Hex
• Material: Black Polycarbonate
• Fits belt types: 5mm pitch HTD timing belt, 9mm wide
• Weight: 0.0025 Pounds

This cylinder, manufactured by phd, Inc, is robust and features a 3/4" diameter bore and a 4" stroke. The head, cap, and tube are all made of strong, lightweight aluminum. The rod is made from chrome-plated steel, and includes standard cushions to reduce end of travel impact.

We also provide a 2" and 6" stroke version of this same cylinder.

Specifications:

• Manufacturer: phd, Inc.
• Manufacturer part number: OCG13/4x4
• Type: Double Acting
• Bore: 3/4"
• Stroke: 4.0"
• Port Size: 1/8" NPT
• Weight: 0.42 lbs
• Rod End Thread: 1/4-28 (NF, fine pitch)

These double acting single rod stainless steel cylinders are a solid choice when you want air actuated motion. These cylinders have a strong 0.75 in. thick bore and are available in multiple stroke lengths.

Specifications

• Bore: 3/4 in.
• Manufacturer: SMC
• Manufacturer Part #: NCME075-[stroke length]
• Nose Thread: 5/8-18
• Pivot Point: Rear
• Port(s): 1/8 in. NPT
• Retracted Overall Length: 6.5 in., 8.5 in., 10.5 in., 11.5 in.
• Rod Thread: 1/4-28
• Stroke: 2 in., 4 in., 6 in., 7 in.

Documents

CAD File(s)

am-2034_2.STEP

am-2034_4.STEP

am-2034_6.STEP

The Planetary Gearbox (PG) series of gearboxes and gearmotors feature robust planetary gearing inside paired with reliable motors. You asked for it, we delivered. This gearbox now features a 0.500 in. HEX output shaft to easily attach to 1/2 in. bore wheels, sprockets, and other motion products without the need for special adapters. The PG71 Gearmotor includes 775 motor with integrated quadrature encoder, simplifying feedback control.

Specifications

• Lubrication: Included with Gearbox
• Material: Steel
• Mounting Geometry: Four 10-32 threaded holes on a 2.00 in. Bolt Circle, 4 M4x0.7 Threaded Holes on a 1.378 in. Bolt Circle
• Weight: 1.98 lbs

Documents

CAD File(s)

am-3655 PG71 500 hex Motor Encoder.STEP

Don't see what you need?

See_all_our_guides,_drawings_and_CAD_files_here

Game pad or joystick alone not your ideal driver setup? Try out the Button Board Deluxe. This controller doubles as a joystick and programmable buttons. When plugged into a Windows computer, the controller will show up as a Generic USB Controller and can be seen by the FIRST Robotics Competition Driver Station. The button Board Deluxe includes an attached USB cable for connecting to your driver station.

Features:

• Compatible with: PC,PS3,PS4,Xbox One
• Material: ABS
• Cable length: 70 in.
• Interface: USB
• Weight: 1.6 lbs

Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub.

Connections:

• JST VH
• Anderson Power Pole

This is 12 GA bonded wire* with Red and Black Jacketing. It is much easier to use than two separate wires, easier to follow during troubleshooting, and easier to keep your wiring clean. Pull apart at the end only as much as you need and the rest stays together.

If you are looking for a much more flexible wire or wire that is not bonded check out our Silicone Wire. 
 

* - This is also known as zip cord or zip wire.

Specifications

• Gauge: 12 AWG
• Length: 25 feet
• Total Weight: 1.2 lbs
• Weight: 0.05 lbs/ft
• Wire Jacketing: black & red (bonded together)