Close
Main Categories
    Filters
    Preferences
    Search

    STEM

    View as Grid List
    Sort by
    Display per page

    Tormach 24R CNC Router Entry Package

    #39300-EP
    Request a Quote

    With a chiller, owners kit, and PathPilot CNC controller, the 24R Router Entry Package has all you need to get started.

     

    Note: This item will incur additional freight charges that will be quoted.

     

    Tormach 770M CNC MILL - Entry Package

    #38251-EP
    Request a Quote

    The Tormach 770M is a Compact 3-Axis CNC mill with PathPilot controller. This package includes mill, controller, and owners kit.

     

    Includes:

     

     

    770M Mill

    770M Machine Owner's Kit

    Manual Oil Pump

    PathPilot Controller - Rev. C

     

    Tormach 770M CNC MILL - Standard Package

    #38251-STP
    Request a Quote

    Take the 770M Starter Package, then move on up with the convenience of a power drawbar and the safety and cleanliness of an enclosure. It’s the 770M Standard Package.

     

    Includes:

     

    770M Mill

    770M Machine Owner's Kit

    770MX / 770M Stand

    770M Chip Tray

    Manual Oil Pump

    770M Enclosure Kit

    PathPilot Controller

    Standard LCD Monitor

    Waterproof Mouse

    Waterproof Mini-Keyboard

    Jog Shuttle Controller

    Controller Arm

    Power Drawbar Kit for 1100M / 770M

    Clamp Kit for 5/8 in. T-Slots (58 Pcs.)

    5 in. (127 mm) CNC Vise

    End Mill Kit for Aluminum #1

    TTS™ CNC Operator Set with Tormach Tool Assistant

    Lifting Bar Kit

    Machine Way Oil (1 Gallon)

     

     

    Tormach PCNC 440 CNC Mill - Entry Package

    #37236-EP
    Request a Quote

    Tormach’s PCNC 440 Entry Package is the foundation that you will need to get started. This package includes mill, controller, and owners kit.

     

    Includes:

     

    PCNC 440 Mill

    Machine Owner's Kit for PCNC 440

    PathPilot Controller for 15L Lathe and PCNC Mills

     

    Note: This item will incur additional freight charges that will be quoted.

     

    Tormach PCNC 440 CNC Mill - Starter Package

    #37236-SP
    Request a Quote

    The Starter Package for the PCNC 440 builds on the basics of the Entry Package by adding on a stand, chip pan, controller arm, monitor, keyboard, mouse, tooling, and vise.

     

    Includes:

     

    PCNC 440 Mill

    Machine Owner's Kit for PCNC 440

    PCNC 440 Stand

    PCNC 440 Chip Pan

    Machine Way Oil (1 Gallon)

    PathPilot Controller for 15L Lathe and PCNC Mills

    Standard LCD Monitor

    Waterproof Mini-Keyboard

    Jog Shuttle Controller

    Waterproof Mouse

    Controller Arm

    4 in. CNC Vise

    Manual Operator Set (Inch)

    Cutting Tool Starter Set #1

     

    Note: This item will incur additional freight charges that will be quoted.

    Dremel 3D Idea Builder 3D40 Printer with Flex Plate - EDU

    #F0133D40BB
    $2499.00

    The Dremel Digilab 3D40 FLEX Idea Builder 3D printer is Dremel's best 3D printer for classroom use or to use at home. 3D printing beginners, teachers and students alike will appreciate the new removable flexible build plate that makes it quick and easy to remove finished parts after printing,

    Dremel 3D45 Idea Builder 3D Printer

    #F0133D45AA
    $2795.00 $3199.99
    ( 0 In stock)

    Features:

    • Precise Output: 50-micron resolution & temperature-controlled chamber
    • Filament Auto-Recognition: Automatically changes temperature settings
    • HD Camera: Remotely manage 3D45s & capture time-lapse videos
    • Perfect for Makerspaces: Easily network & stack 4 units to 6 ft tall
    • Carbon Filters: Protect yourself against harmful VOCs

    Includes,

    • 1 Nylon Filament Roll
    • 1 Eco-ABS Filament Roll
    • Dremel Print Cloud License
    • Dremel DigiLab 3D Slicer
    • Stick of Glue
    • Object Removal tool
    • USB Flash Drive
    • Quick Start Guide
       

    Dremel 3D Idea Builder 3D45 Printer - EDU

    #3D45-EDU
    $3145.00 $2699.99
    ( 0 In stock)

    The Dremel 3D45 is the most reliable and easiest-to-use 3D printer for advanced users in higher education and corporations. You can now use expanded filament types like nylon and eco-ABS. To make things easier, the 3D45 has filament detection via RFID that enables the printer to automatically recognize and change settings for optimized printing. With new features like a heated bed and an integrated camera, you can take 3D printing to the next level. With the 3D45 comes the web-based slicing and printing program that allows you to directly print via wifi or ethernet connection.

    The EDU Bundle includes:

    • 3D45 3D Printer
    • 4 Spools of Dremel Filament
    • 2 3D45 Build Plates
    • 5 Build Plate Glue Sticks
    • 30 Standard-Based Lesson Plans
    • 4 Hour 3D Printing PD Voucher

    fischertechnik Fuel Cell Kit

    #520401
    $143.41 $136.96
    How does a fuel cell work and how does it generate hydrogen? Fischertechnik's Fuel Cell Kit brings this technology of the future directly into the child's play room and provides answers to these and other questions! With the fuel cell and the additional solar module, interesting additional models can be built in connection with the "Oeco Energy" construction set. The fischertechnik Fuel Cell Kit also comes with an instructional activity booklet that offers assistance. (CAUTION: Absolutely necessary for operation is Oeco Energy - Art. No.: 520400 or Oeco Tech – Art. No.: 505284)
    • Incl. instructional activity booklet
    • Incl. reversible fuel cell with integrated hydrogen storage unit, solar module (1V, approx. 400 mA)
    Parts: 20

    fischertechnik Introduction to STEM II Single Set (Recommended 1 set per 2 students)

    #533507
    $260.77 $249.02

    fischertechnik Introduction to STEM II is a more in-depth introduction to technology and robotics. This set uses everyday technology and invites students to construct 12 easy-to-understand models. Students are offered a foundation in STEM concepts with a focus on computer science. Based on the easy-to-use ROBO Pro Light software, this set introduces programming activities and incorporates robotics as a catalyst for interactive learning. Through building a model, students will experience hands-on applications of programming and see how it translates to the physical world. Engage students with hands-on activities that will help them develop an interest and aptitude in computer science and other STEM subjects. This education set is recommended for grades 3-5, and includes standards-based curriculum.

    Learn more about topics covered and components included in this set in the product description below.

    Save when you puchase more. Ask us for a quote!

    Aluminum Axles 3" Long (Pkg of 10)

    #30714
    $3.00 $1.71

    Cut your dragster’s axle weight in half by using aluminum instead of steel! Buy these 1/8" diameter axles precut, or cut your own from our three-foot lengths. Use the Precision Metal Saw (sold separately) to cut axles to desired lengths.

    Aluminum Axles 2-3/4" 70mm Long (Pkg of 100)

    #28035
    $16.50 $13.71

    Cut your dragster’s axle weight in half by using aluminum instead of steel! Buy these 1/8" diameter axles precut, or cut your own from our three-foot lengths. Use the Precision Metal Saw (sold separately) to cut axles to desired lengths.

    AP (Air-Powered) Dragster – Getting Started Package

    #37748
    $1041.67

    With Pitsco Education's AP Dragster - Getting Started Package start to help students understand force and motion, potential and kinetic energies, and more with this fun activity. It uses a plastic bottle to create a racer that flies down the track powered by air pressure. These are fun to build, and students can personalize their racer with paint, decals, or other items. Pack includes the kits, launcher, tire pump, and other items needed to lead the activity. Track length is 35' to 40'. Requires small shaping tools such as a coping saw, wood shaver, and sanding stick or sandpaper, sold separately.

    AP (Air-Powered) Dragster Designer Single

    #36286
    $11.35

    The Pitsco Education AP Dragster Designer is an air-powered vehicle kit includes a balsa wood body blank that students shape, enabling them to apply knowledge of aerodynamics, friction, and other principles. After shaping the dragster, they assemble it and launch it on the AP Dragster Launcher, an air-powered launcher. Kit includes a body blank with predrilled axle holes and launch tube channel, four wheels, four axle bushings, two acetal axles, launch tube, straw, tube cap, self-adhesive glue lines, guide supports, and sandpaper. Requires the AP Dragster Launcher; an air pump; and simple cutting, shaving, or sanding tools such as a coping saw, wood shaver, sanding stick, or sandpaper, sold separately.

    AP (Air-Powered) Dragster Launcher

    #36020
    $715.58

    Searching for an introduction to racing that delivers the same excitement in the classroom as CO2 dragsters? The AP dragster activity provides a fun and safe racing experience for a fraction of the price.

    This racing system is small enough that you can run a race in the classroom or hallway and then easily store the unit. To use the AP Dragster Launcher, just attach an air pump, slide two air-powered vehicles onto the launch tubes, pump to build air pressure, and press the button to simultaneously launch two cars down a 35- to 40-foot track! The launcher comes with a string anchor, which includes a spring-tension feature to maintain even string tension.

    Using the AP Dragster Designer Kit, students can create a vehicle based on aerodynamics and other racing principles. Or, use the AP Mini Dragster Kit to demonstrate potential vs kinetic energy, force, motion, and other concepts.

    The launcher features a built-in pressure relief system to keep air pressure to fewer than 40 psi. With HDPE construction and a built-in air gauge, the launcher is sturdy, and its dual-pressure tanks provide consistently even launches. Launcher is 16" x 11" x 3" and requires a hand pump or bicycle pump, sold separately. No assembly required.

    AP (Air-Powered) Mini Dragster

    #36285
    $10.05

    The Pitsco Education AP Mini Dragster kit launches with air power, and its laser-cut chassis parts provide a quick and easy build. Also includes a car body design sheet that students can color and cut out. Or students can design and draw their own car body and use it. Includes the design sheet, laser-cut wooden parts, four wheels, four axle bushings, two acetal axles, launch tube, straw, tube cap, self-adhesive glue lines, and sandpaper. Requires the AP Dragster Launcher, an air pump, HD Bond II or similar white glue, glue stick, and scissors, sold separately.

    AP Bottle Racer Kit

    #38805
    $6.83

    With Pitsco Education's AP Bottle Racer Kit you can build an air-powered bottle rocket car to race in no time! This basic kit makes it easy for your students to make a launchable rocket car with ease – no tools required. Comes with corrugated chassis material, wheels, bushings, axles, string guide tube, bottle, and self-adhesive tabs – everything you need for one car. Launching requires the AP Bottle Racer Launcher and a tire pump, sold separately.

    AquaPort II Water Rocket Launcher

    #38826
    $339.00
    ( 0 In stock)

    Water rocketry is one of the most fun and exciting hands-on science activities around. Converting empty plastic soda bottles into high-flying rockets provides a great opportunity for students to discover important scientific principles such as Newton’s laws, acceleration, thrust, and inertia.

    Balsa Bridges - Getting Started Package

    #23619
    $699.00

    Building model bridges from balsa or basswood is a great way to get students engaged in technology, science, and engineering principles. This Getting Started package includes materials for 25 students, testing equipment, and curriculum to get your classroom into bridge building.

    Balsa Wood Body Blanks , Size: 12" x 1-5/8" x 2-3/4"

    #53347
    $12.68
    Our standard balsa wood body blank is built for a lightweight car that will really zoom down the track! Predrilled hole for a CO2 cartridge is precisely drilled every time.

    Balsa Wood Body Blanks . Size: 8" x 1-1/2" x 2-3/4"

    #53436
    $10.51
    Our standard balsa wood body blank is built for a lightweight car that will really zoom down the track! Predrilled hole for a CO2 cartridge is precisely drilled every time.

    Basswood Body Blanks Size: 12" x 1-5/8" x 2-3/4"

    #33558
    $10.50
    ( 0 In stock)

    The standard in basswood body blanks for the CO2 cars that Pitsco manufactures. Predrilled hole for a CO2 cartridge is precisely drilled every time. Choose basswood for a durable car.

    Bridgepak 10-Pack, Balsa Wood

    #35679
    $92.39

    Pitsco Education Bridgepak includes all the materials you need to complete an exciting bridge design and building activity. Packs are available for a class of 10 or a class of 25 with Balsa wood or basswood strips, individual bottles of colored Pitsco Structures Glue and The Pitsco Bridge Book, student guide sheets. Balsa wood strips are 1/8" x 1/8" x 24". Basswood strips are 3/32" x 3/32" x 24". Construction requires hobby knife or Timber Cutter, small clips, foam board, pins, and waxed paper, sold separately.

    Bridgepak 10-Pack, Basswood

    #35681
    $102.09

    Pitsco Education Bridgepak includes all the materials you need to complete an exciting bridge design and building activity. Packs are available for a class of 10 or a class of 25 with Balsa wood or basswood strips, individual bottles of colored Pitsco Structures Glue and The Pitsco Bridge Book, student guide sheets. Balsa wood strips are 1/8" x 1/8" x 24". Basswood strips are 3/32" x 3/32" x 24". Construction requires hobby knife or Timber Cutter, small clips, foam board, pins, and waxed paper, sold separately.

    Construction Caddy II

    #29254
    $226.45

    Pitsco Education Construction Caddy II is constructed of high-density polyethylene, which helps make it water resitant and extremely durable. It has a big work area – 18-3/4" x 9-3/8" – that holds a piece of foam board or the Pitsco Perf Insert. Tape a template to foam board and pin the pieces for convenient gluing. The foam board can be removed and stored, so the caddy can be used again quickly. The caddy holds pins, balsa wood sticks, glue, and more. Includes one piece of foam board.

    Balsa wood, glue, T-pins, Perf Insert, and Accu-Fixtures sold separately.

    Custom Cruiser Teacher’s Guide

    #54672
    $26.14

    A must-have for teachers embarking on the Pitsco Custom Cruiser Vehicle Design activity. This book takes you through the entire activity including design concepts, CAD drawings, clay modeling, vehicle construction, and testing. Contains many helpful suggestions for implementing this activity in your classroom.

    Custom Cruisers – Getting Started Package

    #33444
    $430.50

    You’ll cruise through this CO2-vehicle activity with our Getting Started package. It brings together all the materials needed to build 25 Custom Cruisers, plus a video, teacher’s guide, and book to help guide you and your class through the process.

    Requires a drill, coping saw, wood file or rasp, finish, and a race system, sold separately.

    Designer-Super C Wheel

    #27166
    $1.51

    Students simply paint the hubs to match or complement their dragsters’ color. Tires and hubs are shipped unassembled. The hubs are white polystyrene. The Super C tires are snap-on rubber rings.

    Designer-Super C Wheel - 100 PAK

    #27167
    $43.41

    Students simply paint the hubs to match or complement their dragsters’ color. Tires and hubs are shipped unassembled. The hubs are white polystyrene. The Super C tires are snap-on rubber rings.

    EZ Finish Gate

    #33134
    $481.85

    Sensing the first car to finish and signaling the winner with a light, the EZ Finish Gate will clear any question about who finished first.

    Like the EZ Start Gate, this finish gate is made of durable, high-density polyethylene (HDPE) and works on a floor track or the FasTrak. Comes with detectors and a 12-volt power adapter. Requires the EZ Start Gate, sold separately. Note: The EZ Finish Gate can also work with the AP Dragster Launcher, sold separately.

    EZ Start Dragsters – Getting Started Package (Balsa Wood)

    #33445
    $1675.00 $1345.44

    An inexpensive way to introduce dragsters into your curriculum, this package offers enough materials to build 50 dragsters and the equipment to race them.

    Requires a drill, coping saw, wood rasp or file, ruler, scissors, and finish, sold separately.

    EZ Start Gate

    #33133
    $595.00

    Race CO2 dragsters – even with a budget on the brakes.

    Start with the EZ Start Gate – a manual start gate designed to make dragster activities easy and affordable. Lining up cars and launching them is a simple operation, and students spot the winners at the finish line. When you can budget for more equipment, add the EZ Finish Gate to quickly and accurately indicate the winner. Or get both – the entire EZ Start Raceway – at the same time.

    The EZ Start Gate works on a floor track or the FasTrak Elevated Racetrack, sold separately. It is made of durable, high-density polyethylene (HDPE) to last for years. Comes with floor anchors, monofilament line, and track hardware.

    EZ Track Raceway

    #44618
    Request a Quote

    Quickly set up and race in the classroom with the EZ Track Raceway. The track comes with 20 one-meter high-strength PVC sections that easily slide together with joints that slightly elevate the track off the ground. Use the 20 sections to create a dual-lane setup or one long lane to race down. Race dragsters, mousetrap vehicles, bottle racers, solar cars, and more. When the racing is finished, the track quickly disassembles and can be stacked for storage. Compatible with the EZ Start Raceway, Impulse G3 Race System, and more.

    FLO Fog Generator

    #42180
    $516.30

    Fog machines are valuable flow-visualization tools, and this handheld version is the best we’ve created!

    The FLO Fog Generator injects a fog stream into a wind tunnel to test the aerodynamics of objects such as drag racers. It is a cleanable unit that can be easily opened to wipe away residue – plus, it operates without generator tubes. Includes the fogger unit and one bottle of fog fluid.

    Note: Fog fluid (42312) is only compatible with the FLO Fog Generator (42180).

    Fold & Race Ramp

    #55080
    $14.42

    Fold it up and start racing within minutes!

    The Fold & Race Ramp is designed to test and race Fold-N-Roll Racers, balloon cars, and other rolling models in your classroom. Economical, easy to store, and fun to use.

    Fold-N-Roll – Getting Started Package

    #33517
    $143.48

    Introducing transportation has never been easier. This Getting Started package includes everything you need to launch your students’ program: vehicle templates, axles, wheels, two test ramps, and the Dr. Zoon Fold-N-Roll Video.

    Requires scissors, hobby knife, and transparent tape, sold separately.

    Geosolids

    #35231
    $18.02

    Pitsco Education Geosolids ask student to use simple materials to build three-dimensional models of five geosolids, or regular polyhedra: tetrahedron, cube, octahedron, dodecahedron, and icosahedron. The included activities have students note the number of vertices, edges, and faces of each structure, which is used to help them build the structure.

    Each kit includes 100 straws, 100 pipe cleaners, teacher instructions, and a student user guide.

    Grid Paper

    #51850
    $21.13

    Our Grid Paper is offered in two sizes and three grid patterns. Choose the one that's right for your activity.

    The 51850 1/8" Grid Paper has 1/8" grids printed on one side of a 10-1/2" x 16" sheet. It is useful for sketches needing a little more detail – plus, it is the recommended size for bridge-building activities. Sold in packages of 100 sheets.

    The 55509 1/4" Grid Paper is a double-sided, 11" x 17" sheet that displays quarter-inch squares on one side and one-millimeter squares on the other side. A metric ruler is printed along the bottom for quick-and-easy measurements. . . .

    GT-FX Wheels

    #36686
    $2.17

    Designed with style in mind, the GT-FX Wheels not only are cool but also can be used as the front wheels on any car design. Especially good for shell dragsters as the axle hole goes all the way through the wheel. Injection molded.

    Large Structures Package

    #38598
    $135.87

    Pitsco Education Large Structures Package helps younger students learn about basic structures and easily handle the materials. The giant, fuzzy, and colorful pipe cleaners in this pack are not only fun to use but also easy to handle for small hands. A class of students can each learn to make two basic shapes and then combine materials to create bigger, more complex structures.

    Comes with 120 large assorted-color pipe cleaners, 180 AP Rocket Tubes (12" long, .518 ID, .544 OD), and instructions for building a cube and tetrahedron.

    Launch Commander

    #54972
    $244.57
    Consists of Launch Module, Supervisor Module, and Alligator Clip Assembly. The Launch Commander is compatible with both the Pitsco LaunchGuard launchpad and the Estes Porta-Pad, not included.

    Launchpad

    #54971
    $168.04
    The Launchpad is made from heavy plastic, has an adjustable launch rod, and comes with the standard 1/8" diameter x 31" long rod. It also accepts a 3/16" rod for larger rockets (3/16" rod available separately). Launchpad is part of the LaunchGuard System.

    Lil’ Termite Sander

    #30574
    $139.00 $105.94

    Designed to create more precise angles and tighter joints for balsa wood and basswood structures – as well as to deburr axles for dragsters – the Lil’ Termite Sander is a simple device to operate and clean. You and your students will be amazed at the difference the Lil’ Termite Sander makes on the overall strength and precision of structure joints.

    To create angles for wood structure pieces, mark the desired angle on the wood piece, place it flat on the sanding table, and push the piece against the sanding disc until it is sanded to the marked line. Or, use the etched miter angles . . .

    Little Moe Mousetrap Vehicle

    #58349
    $19.50 $15.31
    ( 0 In stock)

    Pitsco Education Little Moe Mousetrap Vehicle is the best little car kit on the market. It is ideal for students who have limited access to tools or are new to building mousetrap vehicles. Little Moe is one of the fastest mousetrap cars and travels from 10 to 20 meters for most first-time builders. The kit is predrilled and ready to assemble and includes materials for a 13" car. Requires glue and needle-nose pliers, sold separately.

    Long Shank Screw Eyes

    #53693
    $49.00 $16.76

    For use with shell-type dragsters and other applications.

    Lumberjack Cutter

    #36595
    $99.00

    Pitsco Education Lumberjack Cutter is a safe, precise way to cut your larger balsa wood pieces. Starting with a solid 8" x 14" base of MDF, the Lumberjack features a 12" built-in ruler and angles marked at 10-degree increments from 0 to 90 degrees – handy tools when building a detailed structure project. Metal bars block access to the blade to ensure safety during use. Cuts balsa wood up to 1/8" thick and 3/4" wide.

    Replacement blades sold separately. Please see price options below.

    Masterpiece Toothpick Bridges Class Pack

    #35689
    $115.30

    Pitsco Education Masterpiece Toothpick Bridges Class Pack includes a pint of colored Structures Glue, 30 two-ounce glue bottles, waxed paper, and 25,000 toothpicks. Your upper-elementary students will impress themselves and you after finishing one of the elaborate bridges from Masterpiece Toothpick Bridges. Give them everything they need to accomplish the construction with this class pack.

    Materials Deflection Tester

    #39211
    $484.68

    Pitsco Education Materials Deflection Tester brings accurate measurement to testing various materials. Want to know whether laminated balsa wood bends more or less than plain balsa wood? If aluminum bends more than steel? It’s easy with this tester.

    Just place the material in the clamp and on top of the metric dial indicator plunger, zero the indicator, place the desired weights on top, and read the amount of deflection on the dial. You can test materials using a point load and several support types including cantilever, fixed, simple, and roller, and you can move the weight to different areas of the materials, such as the center versus the middle.

    Tests material up to 1' L x 1-1/4" W x 3/4" H with a maximum deflection of 0.78". Comes with 500 grams of masses for testing. No assembly required.