Specifications:

• Bore: 0.375 in. Hex
• Series: #25
• Weight: 0.034 Pounds
• Material: 7075-T6 Aluminum
• Thickness: 0.1 in.
• Tooth Count: 18
• Hub Diameter: 0.873 in.
• Overall Depth: 0.4 in.
• Pitch Diameter: 1.440 in.
• Outside Diameter: 1.568 in.

This is a 18 tooth sprocket with a 0.5 in. keyed bore.

This is a 18 tooth sprocket with a 10mm DD bore.

Specifications:

• Bore: 0.375 in. Hex
• Series: #25
• Weight: 0.06
• Material: 7075-T6 Aluminum
• Thickness: 0.1 in.
• Tooth Count: 24
• Hub Diameter: 1.123 in.
• Overall Depth: 0.4 in.
• Pitch Diameter: 1.91 in.
• Outside Diameter: 2.049 in.

This is a 24 tooth sprocket with a 0.5 in. keyed bore.

This is a 24 tooth sprocket with a 10mm DD bore.

#25 Connecting Link (Master Link) 

Specifications:

• Material: Steel
• Style: Roller Chain - Spring Clip
• Type: Connecting Link
• Size: #25
• Pitch: 0.250 inch
• Weight: 0.01 lbs

This Inline Chain Tensioner for #25 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #25 Master Links and integrate this to your project for an easy-to-use chain tension solution!

The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.

Specifications

• Chain Size: #25

Documents

CAD File(s)

am-3915_25 25 Chain Inline Tensioner REV3.STEP

Layout Print(s)

am-3915_25 #25 Chain Inline Tensioner REV3.PDF

#35 Connecting Link (Master Link) 

Specifications:

• Material: Steel
• Style: Roller Chain - Spring Clip
• Type: Connecting Link
• Size: #35
• Pitch: 0.375 inch
• Weight: 0.01 lbs

#35 Half Link. Also known as #35 Offset Link. 

Specifications:

• Material: Steel
• Style: Roller Chain with interted pin
• Type: Half Link
• Size: #35
• Pitch: 0.375 inch
• Weight: 0.01 lbs

This Inline Chain Tensioner for #35 series roller chain is perfect to adjust the desired tension in a long run of chain on mechanisms such as elevators and arms. This is ideal where there is at least a ~3" section of chain that never passes over a sprocket in a given mechanism. Pair this with two #35 Master Links and integrate this to your robot for an easy-to-use chain tension solution!

The design of this product was inspired by Misumi's Chain Turnbuckles. This product has been improved to be compatible with imperial-sized wrenches.

Specifications

• Chain Size: #35

Documents

CAD File(s)

am-3914_35 35 Chain Tensioner.STEP

Layout Print(s)

am-3914_35 #35 Chain Inline Tensioner.PDF

#35 Roller Chain, 10 feet 

Specifications:

• Material: Steel
• Specification: ASME/ANSI B29.1
• Style: Riveted - Single Strand
• Type: Roller Chain
• Size: #35
• Pitch: 3/8"
• Weight: 2.5 lbs

Do you need an odd number of chain links? Tired of dealing with cotter pins in old school "half links"?  Love using the DarkSoul or ARC chain tool for everything? These are the links for you!

These links add one and a half links to a run of chain making for easier cleaner alternative to half links. Use a chain splicing tool or two master links to install them. No more lost matches from a failed half link!

Specifications

• Chain Size: #25, #35
• Material: Steel
• Pitch: 0.25 in., 0.375 in.
• Style: Roller Chain

S25-10HA-DD, 7075 Aluminum Sprocket, 25 Series, 10 tooth, DD Bore

This ACME, precision lead screw with two (2) starts has right hand threads of five (5) turns per inch. The lead screw is made from high strength 4140 steel and has been machined to fit into the DART linear actuator. The bronze nut rides smoothly over the lead screw threads, and has it's own threads on the outside diameter in order to be mounted into a tube, shaft, or housing. This pair is useful in many robotic applications to turn rotational motion from a motor into linear motion as the nut travels the length of the lead screw. This is the lead screw and nut used in the DART linear actuator. 

These PowerAc Inch Acme screws and nuts include a centralizing thread form to prevent wedging and binding. When compared to general-purpose thread forms, centralizing threads are manufactured with tighter tolerances and reduced clearance on the major diameter to increase precision and reduce issues.

Specifications

• Outside Diameter: 0.5 in
• Pitch: 0.1 in

This ACME, precision lead screw with two (2) starts has right hand threads of five (5) turns per inch. The lead screw is made from high strength 4140 steel and has been machined to fit into the DART linear actuator. The bronze nut rides smoothly over the lead screw threads, and has it's own threads on the outside diameter in order to be mounted into a tube, shaft, or housing. This pair is useful in many robotic applications to turn rotational motion from a motor into linear motion as the nut travels the length of the lead screw. This is the lead screw and nut used in the DART linear actuator. 

These PowerAc Inch Acme screws and nuts include a centralizing thread form to prevent wedging and binding. When compared to general-purpose thread forms, centralizing threads are manufactured with tighter tolerances and reduced clearance on the major diameter to increase precision and reduce issues. 


Nut Specifications:

Specifications

• Outside Diameter: 0.5 in
• Pitch: 0.1 in