Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    FIRST Tech Challenge 2022-23 Partial Game Set Red

    POWERPLAY℠ Presented by Raytheon Technologies is the 2022-2023 FIRST® Tech Challenge game. Teams will compete in an energy-driven game and test the limits of performance, efficiency, and endurance as they power their innovations forward. Read more about POWERPLAY℠ on the FIRST website.

     

    These kits do not include the Field Perimeter (am-0481b) or Soft Tiles (am-2499). Check out the Premium Set (am-3145) to get non-game specifics.

     

     

    # Pièce: am-4800_PR
    $395.00
    Disponibilité: Rupture de stock - en rupture de stock et sera expédié une fois en stock.

    What Should I Buy for My Team:

    • Full Game Set - Comes with all game-specific items a team needs to play a full game of POWERPLAY.
    • Partial Game Set - Comes with all game-specific items needed for one alliance to play POWERPLAY. This is often useful for teams that are splitting the cost of a full field with another team.
      • For Partial Field setup, create 6 Ground Junctions, 4 Low Junctions, 2 Medium Junctions, and 3 High Junctions. Partial Game Sets will be delivered with some of the parts for 2 extra Low Junctions, to be used instead of 2 High Junctions in the case of Remote Game Play. Please see pgs 24-25 of the Field Setup Guide for reference.
    • For the Tools and Tape that are required for this game, check out the POWERPLAY Tape and Tool Sets.
    • Teams unsure of what to purchase for the season should contact their local Program Delivery Partner.

    Full Game Sets (am-4800_Full) Include:

     

    • Scoring Elements:
    • Field Elements:
      • 9 - Ground Junction Tray (am-4802)
      • 8 - 10 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4807)
      • 4 - 20 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4808)
      • 4 - 30 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4809)
      • 4 - POWERPLAY℠ Signal Sticker Sheet (am-4803)
      • 25 - 6 in. Under Tile Disk (am-4804)
      • 20 - 11 in. Black Cable Tie (am-1631_1)
      • 16 - Junction Spring (am-4805)
      • 16 - 1/4-20 x 3.5 in. Hex Head Screw (am-1605)
      • 16 - 1/4-20 x 1.25 in. Elevator Bolt (am-1629)
      • 16 - 0.25 in. ID 3.0 in. OD Washer (am-1628)
      • 16 - 1/4 in. Inside Diameter Fender Washer (am-1421)
      • 16 - Rubber Stopper with Bolt Hole (am-4806)
      • 16 - 1/4 in. Flat Washer (am-1027)
      • 16 - 1/4-20 x 1.75 in. Hex Head Screw (am-1630)
      • 16 - 1 in. OD Tube Cap (am-4810)

     

    Partial Game Sets (am-4800_PB and am-4800_PR) Include:

     

    • Scoring Elements:
    • Field Elements:
      • 6 - Ground Junction Tray(am-4802)
      • 6 - 10 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4807)
      • 2 - 20 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4808)
      • 3 - 30 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4809)
      • 2 - POWERPLAY℠ Signal Sticker Sheet (am-4803)
      • 15 - 3 Hole 6 in. Under Tile Disk (am-4804)
      • 10 - 11 in. Black Cable Tie (am-1631_1)
      • 9 - Junction Spring (am-4805)
      • 11 - 1/4-20 x 3.5 in. Hex Head Screw (am-1605)
      • 9 - 1/4-20 x 1.25 in. Elevator Bolt (am-1629)
      • 9 - 0.25 in. ID 3.0 in. OD Washer (am-1628)
      • 9 - 1/4 in. Inside Diameter Fender Washer (am-1421)
      • 9 - Rubber Stopper with Bolt Hole (am-4806)
      • 9 - 1/4 in. Flat Washer (am-1027)
      • 9 - 1/4-20 x 1.75 in. Hex Head Screw (am-1630)
      • 9 - 1 in. OD Tube Cap (am-4810)

     

     

    Documents

    Guide(s)

    2023FieldSetupGuide_1.2.pdf

    Écrivez votre propre commentaire
    • Le produit peut être examinée que après l'achat
    • Seul les utilisateurs enregistrés peuvent écrire une critique
    • Mal
    • Excellent

    What Should I Buy for My Team:

    • Full Game Set - Comes with all game-specific items a team needs to play a full game of POWERPLAY.
    • Partial Game Set - Comes with all game-specific items needed for one alliance to play POWERPLAY. This is often useful for teams that are splitting the cost of a full field with another team.
      • For Partial Field setup, create 6 Ground Junctions, 4 Low Junctions, 2 Medium Junctions, and 3 High Junctions. Partial Game Sets will be delivered with some of the parts for 2 extra Low Junctions, to be used instead of 2 High Junctions in the case of Remote Game Play. Please see pgs 24-25 of the Field Setup Guide for reference.
    • For the Tools and Tape that are required for this game, check out the POWERPLAY Tape and Tool Sets.
    • Teams unsure of what to purchase for the season should contact their local Program Delivery Partner.

    Full Game Sets (am-4800_Full) Include:

     

    • Scoring Elements:
    • Field Elements:
      • 9 - Ground Junction Tray (am-4802)
      • 8 - 10 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4807)
      • 4 - 20 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4808)
      • 4 - 30 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4809)
      • 4 - POWERPLAY℠ Signal Sticker Sheet (am-4803)
      • 25 - 6 in. Under Tile Disk (am-4804)
      • 20 - 11 in. Black Cable Tie (am-1631_1)
      • 16 - Junction Spring (am-4805)
      • 16 - 1/4-20 x 3.5 in. Hex Head Screw (am-1605)
      • 16 - 1/4-20 x 1.25 in. Elevator Bolt (am-1629)
      • 16 - 0.25 in. ID 3.0 in. OD Washer (am-1628)
      • 16 - 1/4 in. Inside Diameter Fender Washer (am-1421)
      • 16 - Rubber Stopper with Bolt Hole (am-4806)
      • 16 - 1/4 in. Flat Washer (am-1027)
      • 16 - 1/4-20 x 1.75 in. Hex Head Screw (am-1630)
      • 16 - 1 in. OD Tube Cap (am-4810)

     

    Partial Game Sets (am-4800_PB and am-4800_PR) Include:

     

    • Scoring Elements:
    • Field Elements:
      • 6 - Ground Junction Tray(am-4802)
      • 6 - 10 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4807)
      • 2 - 20 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4808)
      • 3 - 30 in. Long 1.05 in. OD Yellow HIPS Pipe (am-4809)
      • 2 - POWERPLAY℠ Signal Sticker Sheet (am-4803)
      • 15 - 3 Hole 6 in. Under Tile Disk (am-4804)
      • 10 - 11 in. Black Cable Tie (am-1631_1)
      • 9 - Junction Spring (am-4805)
      • 11 - 1/4-20 x 3.5 in. Hex Head Screw (am-1605)
      • 9 - 1/4-20 x 1.25 in. Elevator Bolt (am-1629)
      • 9 - 0.25 in. ID 3.0 in. OD Washer (am-1628)
      • 9 - 1/4 in. Inside Diameter Fender Washer (am-1421)
      • 9 - Rubber Stopper with Bolt Hole (am-4806)
      • 9 - 1/4 in. Flat Washer (am-1027)
      • 9 - 1/4-20 x 1.75 in. Hex Head Screw (am-1630)
      • 9 - 1 in. OD Tube Cap (am-4810)

     

     

    Documents

    Guide(s)

    2023FieldSetupGuide_1.2.pdf

    Les clients ayant acheté cet article ont également acheté

    NeveRest Orbital 20 Gearmotor JST-VH-2

    #am-3637b
    $45.16

    TETRIX MAX 12-Volt Rechargeable 3,000 mAh NiMH Battery Pack

    #39057
    $79.95
    (78 En stock)

    Use this 10-cell, 12-volt rechargeable pack to bring long-lasting power to TETRIX® motors and electronics. This 3,000 mAh NiMH pack features a built-in, 20-amp replaceable fuse for safety.

     

    (THIS BATTERY IS FTC LEGAL)

    Orbital Motor Mount

    #76138
    $8.90
    (1150 En stock)
    • 42.0mm*42.0mm*11.3mm thick
    • 16*M3*8.0mm thread
    • M3 pass through holes
    • SHCS sit flush
    • Material - AL6061-T6

    NeveRest Motor REV Expansion Hub Encoder Cable

    #am-3926a
    $5.25

    This is the cable designed for the encoder that is pre-attached to the NeveRest Series of motors and gearmotors. It has a connector on the opposite end to directly interface with the REV Expansion Hub or the REV Control Hub.

     

    2019 Update:

    The 'a' version of this cable as the encoder channels swapped so that the encoder counts in the same direction as the output shaft spins. This simplifies the usage of the encoder with the various programming languages for FTC!

    Specifications

    • Length: 20 in.

    Enhanced Wheel Hub Kit

    #76291
    $9.95
    (501 En stock)

    Used with Studica Omni and Mecanum wheels for a strong axel hold.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Color: Blue
    • Step File

    336mm Low Profile U-Channel

    #76027
    $14.29
    (879 En stock)

    The Studica Low Profile U Channel is 3mm thick and has a 48mm x 14mm profile. As with the other Studica Robotics building components, it has the common hole pattern which makes it easy to connect to other structure with very little or no additional machining required. You can easily connect to other channel, extrusions, bushings, bearing, mounting brackets and more so you can quickly assemble and disassemble robots and automated systems.

    Specifications:

    • Material: 6061-T6 Aluminum
    • Thickness - 3mm
    • Height - 14mm
    • Width - 48mm
    • Length - 336mm
    • Hole pattern - 7
    • Step File