Fermer
toutes catégories
    filtres
    préférences
    Rechercher

    Tours CNC

    Tours CNC
    Voir comme Grille Lister
    Trier par
    Affichage par page

    15L Slant-PRO Starter Package

    #34444-SP
    Demander un devis

    The 15L Slant-PRO Starter Package was configured by Tormach’s technical experts to help you go from learning CNC fundamentals to turning parts. It includes a variety of tools needed to get cutting, such as collets, drill sets, threading tools, Quick Change Tool Post Kit, and a full enclosure for your safety. The Tormach 15L Slant-PRO CNC Lathe features a 15 in. swing bed diameter, 3 HP spindle, and 1.53 in. spindle bore

     

    Note: This item will incur additional freight charges that will be quoted.

     

    Includes:

     

    15L Slant-PRO CNC Lathe

    Manual Oil Pump

    Machine Way Oil (1 Gallon)

    Full Enclosure Kit for 15L Slant-PRO

    15L Slant-PRO Lathe Owner's Kit

    Light Kit for Tormach 15L Slant-PRO

    PathPilot Controller for 15L Lathe and PCNC Mills

    Controller Arm

    Waterproof Mini-Keyboard

    Cable Kit for Tormach 15L Slant-PRO

    Standard LCD Monitor

    Jog Shuttle Controller

    PathPilot Controller VESA Mount

    Waterproof Mouse

    Floating Tramp Oil Collection Pillow

    Full Synthetic Coolant - 1 Gal.

    Basic 3 Piece Indicator Set

    Lathe Tool Starter Kit #1

    OD Threading Tool: CER0750K16

    ER20 Collet Chuck

    ER20 Collet Set (15 Pcs.)

    Plain Center Drill Set

    1/16 in. - 1/2 in. Jobber Length Drill Set (by 64ths)

    Quick Change Tool Post Kit for Tormach 15L Slant-PRO Lathe

    3-Jaw Reversible 6 in. Lathe Chuck (D1 Type Direct Mount)

     

    8L CNC Lathe Deluxe Package

    #37900-DP
    Demander un devis

    The 8L Deluxe Package builds off of the Entry Package with the addition of a robust stand with integral coolant tank, separate chip drawer for easy chip removal, storage drawers, and optional side shelving, as well as controller arm, LCD monitor, waterproof mouse and keyboard, deluxe professional lathe tool kit and OXA tool holder kit.

     

    The 8L is a native 5C lathe that offers a 1.5 HP (1.11 kW) spindle that runs at 180-5000 RPM. It comes with a fully assembled enclosure as part of the base model. The footprint remains small, ringing in at 26 in. x 50 in., and the lathe itself is attached to a hand-scraped 140 pound cast base.

     

    • Motor: 1.5 HP Single-Phase
    • Swing over bed: 8 in.
    • Swing over carriage: 4 in.
    • Distance between centers: 15 in.
    • Spindle bore: 1.25 in.
    • Spindle type: 5C
    • Speeds: 180-5000 RPM
    • Tailstock taper: MT2
    • Tailstock barrel travel: 2.2 in.
    • Shipping weight: 1000 lbs.

     

    What's Included?

    • 8L Lathe
    • 8L Lathe Stand
    • PathPilot Control
    • PathPilot Controller VESA Mount
    • Machine Owner's Kit
    • Controller Arm
    • Waterproof Mini-Keyboard
    • Waterproof Mouse
    • Jog Shuttle Controller
    • Standard LCD Monitor
    • 0XA Tool Holder Kit for 8L
    • Deluxe Professional Lathe Tool Kit

    Note: This item will incur additional freight charges that will be quoted.

    8L CNC Lathe Entry Package

    #37900E
    Demander un devis

    The 8L Entry Package includes the lathe in a fully-assembled enclosure, owners kit,
    and PathPilot CNC controller.



    You acquire your own tooling, monitor, keyboard and mouse and you’re ready to get cutting!

     

    The 8L is a native 5C lathe that offers a 1.5 HP (1.11 kW) spindle that runs at 180-5000 RPM. It comes with a fully assembled enclosure as part of the base model. The footprint remains small, ringing in at 26 in. x 50 in., and the lathe itself is attached to a hand-scraped 140 pound cast base.

     

    • Motor: 1.5 HP Single-Phase
    • Swing over bed: 8 in.
    • Swing over carriage: 4 in.
    • Distance between centers: 15 in.
    • Spindle bore: 1.25 in.
    • Spindle type: 5C
    • Speeds: 180-5000 RPM
    • Tailstock taper: MT2
    • Tailstock barrel travel: 2.2 in.
    • Shipping weight: 1000 lbs.

     

    What's In the Box?

    • 8L Lathe
    • PathPilot Control
    • Machine Owner's Kit

    Note: This item will incur additional freight charges that will be quoted.

    8L CNC Lathe Premium Package

    #37900-PP
    Demander un devis

    Take the 8L Deluxe Package and move on up with the newly-designed 8L PathPilot Operator Console, and the 8L machine stand coolant kit. You’ve got everything needed to face, turn, bore, and groove. Plus you can cut it off and do it all over again. Ready to start cutting?

     

    he 8L is a native 5C lathe that offers a 1.5 HP (1.11 kW) spindle that runs at 180-5000 RPM. It comes with a fully assembled enclosure as part of the base model. The footprint remains small, ringing in at 26 in. x 50 in., and the lathe itself is attached to a hand-scraped 140 pound cast base.

     

    • Motor: 1.5 HP Single-Phase
    • Swing over bed: 8 in.
    • Swing over carriage: 4 in.
    • Distance between centers: 15 in.
    • Spindle bore: 1.25 in.
    • Spindle type: 5C
    • Speeds: 180-5000 RPM
    • Tailstock taper: MT2
    • Tailstock barrel travel: 2.2 in.
    • Shipping weight: 1000 lbs.

     

    What's Included?

    • 8L Lathe
    • 8L Lathe Stand
    • 8L Lathe PathPilot Operator Console
    • Machine Owner's Kit
    • Waterproof Mini-Keyboard
    • Waterproof Mouse
    • 0XA Tool Holder Kit for 8L
    • Deluxe Professional Lathe Tool Kit
    • 4 in. Precision 3-Jaw Chuck (5C Mount)

    Note: This item will incur additional freight charges that will be quoted.

    Tormach 15L Slant-Pro Automation Package

    #34444-AP
    Demander un devis

    Tormach’s technical experts configured the 15L Slant-PRO Automation Package for production-level machinists looking to automate part production. Features included are Automatic Collet Closer, Deluxe Lathe Tool Starter Kit, EZ-Puller bar puller, Lathe Turret, and more. 

    The Tormach 15L Slant-PRO CNC Lathe features a 15 in. swing bed diameter, 3 HP spindle, and 1.53 in. spindle bore

     

    Note: This item will incur additional freight charges that will be quoted.

     

    Includes:

     

    15L Slant-PRO CNC Lathe

    Manual Oil Pump

    Machine Way Oil (1 Gallon)

    Full Enclosure Kit for 15L Slant-PRO

    15L Slant-PRO Lathe Owner's Kit

    Light Kit for Tormach 15L Slant-PRO

    PathPilot Controller for 15L Lathe and PCNC Mills

    Controller Arm

    Waterproof Mini-Keyboard

    Cable Kit for Tormach 15L Slant-PRO

    Touch Screen Kit

    PathPilot Controller VESA Mount

    Jog Shuttle Controller

    PathPilot Controller VESA Mount

    Waterproof Mouse

    Floating Tramp Oil Collection Pillow

    Full Synthetic Coolant - 1 Gal.

    9 Inch Length Coolant Nozzle for Turret 10-Pack

    Basic 3 Piece Indicator Set

    Deluxe Lathe Tool Starter Kit

    Turret Kit for Tormach 15L Slant-PRO

    RH Heavy Duty Gang Block

    3-Jaw Reversible 6 in. Lathe Chuck (D1 Type Direct Mount)

    5C Round Collet Set (18 Pcs.)

    Automatic Collet Closer for 15L Slant-PRO

    EZ-Puller with 3/4" Turret Compatible Mounting Kit

    California Air Tools 4610XC Air Compressor

    FRL Filter-Regulator-Lubricator

     

    Tormach 15L Slant-Pro Turret Package

    #34444-TP
    Demander un devis

    The 15L Slant-PRO Lathe Turret Package was configured by Tormach’s technical experts for shops ramping up to eventually add automated manufacturing. It includes an 8-station turret, a full enclosure, and other necessities for turret toolholding systems, such as a coolant nozzle designed for turrets.The Tormach 15L Slant-PRO CNC Lathe features a 15 in. swing bed diameter, 3 HP spindle, and 1.53 in. spindle bore

     

    Note: This item will incur additional freight charges that will be quoted.

     

    Includes:

     

    15L Slant-PRO CNC Lathe

    Manual Oil Pump

    Machine Way Oil (1 Gallon)

    Full Enclosure Kit for 15L Slant-PRO

    15L Slant-PRO Lathe Owner's Kit

    Light Kit for Tormach 15L Slant-PRO

    PathPilot Controller for 15L Lathe and PCNC Mills

    Controller Arm

    Waterproof Mini-Keyboard

    Cable Kit for Tormach 15L Slant-PRO

    Touch Screen Kit

    Jog Shuttle Controller

    PathPilot Controller VESA Mount

    Waterproof Mouse

    Floating Tramp Oil Collection Pillow

    Full Synthetic Coolant - 1 Gal.

    9 Inch Length Coolant Nozzle for Turret 10-Pack

    Basic 3 Piece Indicator Set

    Deluxe Lathe Tool Starter Kit

    Turret Kit for Tormach 15L Slant-PRO

    3-Jaw Reversible 6 in. Lathe Chuck (D1 Type Direct Mount)

     

    8L CNC Lathe (Base Machine)

    #37900
    Demander un devis

    A native 5C 5000RPM 8 in. swing over bed, 10 in. of travel lathe.

     

    The 8L is a native 5C lathe that offers a 1.5 HP (1.11 kW) spindle that runs at 180-5000 RPM. It comes with a fully assembled enclosure as part of the base model. The footprint remains small, ringing in at 26 in. x 50 in., and the lathe itself is attached to a hand-scraped 140 pound cast base.